Re: virtio scsi host draft specification, v3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> If requests are placed on arbitrary queues you'll inevitably run on
> locking issues to ensure strict request ordering.
> I would add here:
> 
> If a device uses more than one queue it is the responsibility of the
> device to ensure strict request ordering.

Applied with s/device/guest/g.

> Please do not rely in bus/target/lun here. These are leftovers from
> parallel SCSI and do not have any meaning on modern SCSI
> implementation (eg FC or SAS). Rephrase that to
> 
> The lun field is the Logical Unit Number as defined in SAM.

Ok.

> >      The status byte is written by the device to be the SCSI status
> >      code.
>
> ?? I doubt that exists. Make that:
> 
> The status byte is written by the device to be the status code as
> defined in SAM.

Ok.

> >      The response byte is written by the device to be one of the
> >      following:
> >
> >      - VIRTIO_SCSI_S_OK when the request was completed and the
> >      status byte
> >        is filled with a SCSI status code (not necessarily "GOOD").
> >
> >      - VIRTIO_SCSI_S_UNDERRUN if the content of the CDB requires
> >      transferring
> >        more data than is available in the data buffers.
> >
> >      - VIRTIO_SCSI_S_ABORTED if the request was cancelled due to a
> >      reset
> >        or another task management function.
> >
> >      - VIRTIO_SCSI_S_FAILURE for other host or guest error. In
> >      particular,
> >        if neither dataout nor datain is empty, and the
> >        VIRTIO_SCSI_F_INOUT
> >        feature has not been negotiated, the request will be
> >        immediately
> >        returned with a response equal to VIRTIO_SCSI_S_FAILURE.
> >
> And, of course:
> 
> VIRTIO_SCSI_S_DISCONNECT if the request could not be processed due
> to a communication failure (eg device was removed or could not be
> reached).

Ok.

> This specification implies a strict one-to-one mapping between host
> and target. IE there is no way of specifying more than one target
> per host.

Actually no, the intention is to use hierarchical LUNs to support
more than one target per host.

Paolo
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux