On Tue, May 17, 2011 at 01:50:19PM -0700, Shirley Ma wrote:
> Resubmit the patch with most update. This patch passed some
> live-migration test against RHEL6.2. I will run more stress test w/i
> live migration.
>
> Signed-off-by: Shirley Ma <xma@xxxxxxxxxx>
Cool. cleanup path needs a fix - are you use you can
not use kobj or some other existing refcounting?
Is perf regressiion caused by tx ring overrun gone now?
I added some comments about how we might be aqble
to complete requests out of order but it's not a must.
> ---
>
> drivers/vhost/net.c | 37 +++++++++++++++++++++++++++++++-
> drivers/vhost/vhost.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++++-
> drivers/vhost/vhost.h | 12 ++++++++++
> 3 files changed, 101 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index 2f7c76a..6bd6e28 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -32,6 +32,9 @@
> * Using this limit prevents one virtqueue from starving others. */
> #define VHOST_NET_WEIGHT 0x80000
>
> +/* MAX number of TX used buffers for outstanding zerocopy */
> +#define VHOST_MAX_ZEROCOPY_PEND 128
> +
> enum {
> VHOST_NET_VQ_RX = 0,
> VHOST_NET_VQ_TX = 1,
> @@ -129,6 +132,7 @@ static void handle_tx(struct vhost_net *net)
> int err, wmem;
> size_t hdr_size;
> struct socket *sock;
> + struct skb_ubuf_info pend;
>
> /* TODO: check that we are running from vhost_worker? */
> sock = rcu_dereference_check(vq->private_data, 1);
> @@ -151,6 +155,10 @@ static void handle_tx(struct vhost_net *net)
> hdr_size = vq->vhost_hlen;
>
> for (;;) {
> + /* Release DMAs done buffers first */
> + if (atomic_read(&vq->refcnt) > VHOST_MAX_ZEROCOPY_PEND)
> + vhost_zerocopy_signal_used(vq, false);
> +
> head = vhost_get_vq_desc(&net->dev, vq, vq->iov,
> ARRAY_SIZE(vq->iov),
> &out, &in,
> @@ -166,6 +174,13 @@ static void handle_tx(struct vhost_net *net)
> set_bit(SOCK_ASYNC_NOSPACE, &sock->flags);
> break;
> }
> + /* If more outstanding DMAs, queue the work */
> + if (sock_flag(sock->sk, SOCK_ZEROCOPY) &&
> + (atomic_read(&vq->refcnt) > VHOST_MAX_ZEROCOPY_PEND)) {
> + tx_poll_start(net, sock);
> + set_bit(SOCK_ASYNC_NOSPACE, &sock->flags);
> + break;
> + }
> if (unlikely(vhost_enable_notify(vq))) {
> vhost_disable_notify(vq);
> continue;
> @@ -188,17 +203,35 @@ static void handle_tx(struct vhost_net *net)
> iov_length(vq->hdr, s), hdr_size);
> break;
> }
> + /* use msg_control to pass vhost zerocopy ubuf info to skb */
> + if (sock_flag(sock->sk, SOCK_ZEROCOPY)) {
> + vq->heads[vq->upend_idx].id = head;
> + if (len <= 128)
I thought we have a constant for that?
> + vq->heads[vq->upend_idx].len = VHOST_DMA_DONE_LEN;
> + else {
> + vq->heads[vq->upend_idx].len = len;
> + pend.callback = vhost_zerocopy_callback;
> + pend.arg = vq;
> + pend.desc = vq->upend_idx;
> + msg.msg_control = &pend;
> + msg.msg_controllen = sizeof(pend);
> + }
> + atomic_inc(&vq->refcnt);
> + vq->upend_idx = (vq->upend_idx + 1) % UIO_MAXIOV;
Ok, so we deal with a cyclic ring apparently? What guarantees we don't
overrun it?
> + }
> /* TODO: Check specific error and bomb out unless ENOBUFS? */
> err = sock->ops->sendmsg(NULL, sock, &msg, len);
> if (unlikely(err < 0)) {
> - vhost_discard_vq_desc(vq, 1);
> + if (!sock_flag(sock->sk, SOCK_ZEROCOPY))
> + vhost_discard_vq_desc(vq, 1);
How are errors handled with zerocopy?
> tx_poll_start(net, sock);
> break;
> }
> if (err != len)
> pr_debug("Truncated TX packet: "
> " len %d != %zd\n", err, len);
> - vhost_add_used_and_signal(&net->dev, vq, head, 0);
> + if (!sock_flag(sock->sk, SOCK_ZEROCOPY))
> + vhost_add_used_and_signal(&net->dev, vq, head, 0);
> total_len += len;
> if (unlikely(total_len >= VHOST_NET_WEIGHT)) {
> vhost_poll_queue(&vq->poll);
> diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
> index 2ab2912..ce799d6 100644
> --- a/drivers/vhost/vhost.c
> +++ b/drivers/vhost/vhost.c
> @@ -174,6 +174,9 @@ static void vhost_vq_reset(struct vhost_dev *dev,
> vq->call_ctx = NULL;
> vq->call = NULL;
> vq->log_ctx = NULL;
> + vq->upend_idx = 0;
> + vq->done_idx = 0;
> + atomic_set(&vq->refcnt, 0);
> }
>
> static int vhost_worker(void *data)
> @@ -230,7 +233,7 @@ static long vhost_dev_alloc_iovecs(struct vhost_dev *dev)
> UIO_MAXIOV, GFP_KERNEL);
> dev->vqs[i].log = kmalloc(sizeof *dev->vqs[i].log * UIO_MAXIOV,
> GFP_KERNEL);
> - dev->vqs[i].heads = kmalloc(sizeof *dev->vqs[i].heads *
> + dev->vqs[i].heads = kzalloc(sizeof *dev->vqs[i].heads *
> UIO_MAXIOV, GFP_KERNEL);
Which fields need to be initialized actually?
>
> if (!dev->vqs[i].indirect || !dev->vqs[i].log ||
> @@ -385,6 +388,38 @@ long vhost_dev_reset_owner(struct vhost_dev *dev)
> return 0;
> }
>
> +/*
> + comments
> +*/
Hmm.
> +void vhost_zerocopy_signal_used(struct vhost_virtqueue *vq, bool shutdown)
> +{
> + int i, j = 0;
> +
> + i = vq->done_idx;
> + while (i != vq->upend_idx) {
A for loop might be clearer.
> + if ((vq->heads[i].len == VHOST_DMA_DONE_LEN) || shutdown) {
On shutdown, we signal all buffers used to the guest?
Why?
> + /* reset len = 0 */
comment not very helpful.
Could you explain what this does instead?
Or better use some constant instead of 0 ...
> + vq->heads[i].len = 0;
> + i = (i + 1) % UIO_MAXIOV;
> + ++j;
> + } else
> + break;
Hmm so if the 1st entry does not complete, you do not signal anything?
> + }
Looking at this loop, done idx is the consumer and used idx
is the producer, right?
> + if (j) {
> + /* comments */
Yes?
> + if (i > vq->done_idx)
> + vhost_add_used_n(vq, &vq->heads[vq->done_idx], j);
> + else {
> + vhost_add_used_n(vq, &vq->heads[vq->done_idx],
> + UIO_MAXIOV - vq->done_idx);
> + vhost_add_used_n(vq, vq->heads, i);
> + }
> + vq->done_idx = i;
> + vhost_signal(vq->dev, vq);
> + atomic_sub(j, &vq->refcnt);
Code will likely be simpler if you call vhost_add_used once for
each head in the first loop. Possibly add_used_signal might be
a good idea too.
> + }
> +}
> +
> /* Caller should have device mutex */
> void vhost_dev_cleanup(struct vhost_dev *dev)
> {
> @@ -395,6 +430,11 @@ void vhost_dev_cleanup(struct vhost_dev *dev)
> vhost_poll_stop(&dev->vqs[i].poll);
> vhost_poll_flush(&dev->vqs[i].poll);
> }
> + /* wait for all lower device DMAs done, then notify guest */
> + if (atomic_read(&dev->vqs[i].refcnt)) {
> + msleep(1000);
> + vhost_zerocopy_signal_used(&dev->vqs[i], true);
> + }
This needs to be fixed somehow. Use a completion object and wait
on it?
> if (dev->vqs[i].error_ctx)
> eventfd_ctx_put(dev->vqs[i].error_ctx);
> if (dev->vqs[i].error)
> @@ -603,6 +643,10 @@ static long vhost_set_vring(struct vhost_dev *d, int ioctl, void __user *argp)
>
> mutex_lock(&vq->mutex);
>
> + /* force all lower device DMAs done */
> + if (atomic_read(&vq->refcnt))
> + vhost_zerocopy_signal_used(vq, true);
> +
> switch (ioctl) {
> case VHOST_SET_VRING_NUM:
> /* Resizing ring with an active backend?
> @@ -1416,3 +1460,12 @@ void vhost_disable_notify(struct vhost_virtqueue *vq)
> vq_err(vq, "Failed to enable notification at %p: %d\n",
> &vq->used->flags, r);
> }
> +
> +void vhost_zerocopy_callback(struct sk_buff *skb)
> +{
> + int idx = skb_shinfo(skb)->ubuf.desc;
> + struct vhost_virtqueue *vq = skb_shinfo(skb)->ubuf.arg;
> +
> + /* set len = 1 to mark this desc buffers done DMA */
this comment can now go.
> + vq->heads[idx].len = VHOST_DMA_DONE_LEN;
> +}
> diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
> index b3363ae..8e3ecc7 100644
> --- a/drivers/vhost/vhost.h
> +++ b/drivers/vhost/vhost.h
> @@ -13,6 +13,10 @@
> #include <linux/virtio_ring.h>
> #include <asm/atomic.h>
>
> +/* This is for zerocopy, used buffer len is set to 1 when lower device DMA
> + * done */
> +#define VHOST_DMA_DONE_LEN 1
> +
> struct vhost_device;
>
> struct vhost_work;
> @@ -108,6 +112,12 @@ struct vhost_virtqueue {
> /* Log write descriptors */
> void __user *log_base;
> struct vhost_log *log;
> + /* vhost zerocopy support */
> + atomic_t refcnt; /* num of outstanding zerocopy DMAs */
future enhancement idea: this is used apparently under vq lock
so no need for an atomic?
> + /* copy of avail idx to monitor outstanding DMA zerocopy buffers */
looking at code upend_idx seems to be calculated independently
of guest avail idx - could you clarify pls?
> + int upend_idx;
> + /* copy of used idx to monintor DMA done zerocopy buffers */
monitor
> + int done_idx;
I think in reality these are just producer and consumer
in the head structure which for zero copy is used
> };
>
> struct vhost_dev {
> @@ -154,6 +164,8 @@ bool vhost_enable_notify(struct vhost_virtqueue *);
>
> int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log,
> unsigned int log_num, u64 len);
> +void vhost_zerocopy_callback(struct sk_buff *skb);
> +void vhost_zerocopy_signal_used(struct vhost_virtqueue *vq, bool shutdown);
>
> #define vq_err(vq, fmt, ...) do { \
> pr_debug(pr_fmt(fmt), ##__VA_ARGS__); \
>
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
