On Wed, Feb 23, 2011 at 7:44 PM, James Neave <roboj1m@xxxxxxxxx> wrote: > On Wed, Feb 23, 2011 at 12:11 AM, Chris Wright <chrisw@xxxxxxxxxxxx> wrote: >> * James Neave (roboj1m@xxxxxxxxx) wrote: >>> On Tue, Feb 22, 2011 at 1:51 AM, Chris Wright <chrisw@xxxxxxxxxxxx> wrote: >>> > * James Neave (roboj1m@xxxxxxxxx) wrote: >>> >> Does anybody know the debug kernel switches for iommu? >>> > >>> > Two helpful kernel commandline options are: >>> > >>> > amd_iommu_dump debug (and drop "quiet") >>> > >>> > The problem is when you attach the device (function) you're getting >>> > stuck up in conflicts with the existing domain for that function. >>> > >>> > My guess is that all the functions are behind a PCI to PCI bridge, so the alias >>> > lookup is finding a conflict. >>> >>> Yes, it's behind a PCI-PCI bridge I think, here's the blurb from an >>> earlier email: >> >> Sorry, I missed that in your original mail, thanks for reposting. >> >>> cat /proc/interruts >>> http://pastebin.com/LQdB3hms >>> >>> lspci -vvv >>> http://pastebin.com/GJDkC8B4 >> >> Â00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) >> >>> lspci -t -v >>> http://pastebin.com/Ftx8Hfjt >> >> Yup, that's what I expected: >> >> Â+-14.4-[08]--+-06.0 ÂVIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller >> Â| Â Â Â Â Â Â+-06.1 ÂVIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller >> Â| Â Â Â Â Â Â+-06.2 ÂVIA Technologies, Inc. USB 2.0 >> Â| Â Â Â Â Â Â\-0e.0 ÂTexas Instruments TSB43AB23 IEEE-1394a-2000 Controller >> >> I'd now expect to see (if you boot with amd_iommu_dump) some IVRS >> details showing an alias range entry basically showing 08:* pointing >> back to 00:14.4. ÂThis means that from the point of view of the IOMMU the >> devices 08:06.0, 08:06.1, 08:06.2, 08:0e.0 will all show up as if they >> are 00:14.4. >> >> When you assign a device to a guest, the guest VM gets an IOMMU domain >> (a context to manage IOMMU page table mappings) and the device is put >> into that guest's IOMMU domain. ÂHowever, if the device is behind a >> PCI-PCI bridge it will appear as an alias for the bridge itself. ÂThe >> bridge is a PCI device with an IOMMU domain. ÂWhen trying to assign a >> device to a guest there's some sanity checking to verify that the device >> (or its alias) aren't already under some IOMMU domain other than the >> guest VM's IOMMU domain. >> >> I suspect this is what you are hitting. ÂYou could test this theory by >> adding 2 more devices to your guest -- the firewire device (08:0e.0) >> and the PCI-PCI bridge itself (00:14.4). >> >> thanks, >> -chris >> > > Hi, > > OK, here we go again! > > Right, I've diabled apparmor (I think) with this: > > sudo invoke-rc.d apparmor stop > sudo update-rc.d -f apparmor remove > > After a reboot I'm back to getting the error about pci-stub claiming the device. > Apparmor being off made no difference to that (except there are no > apparmor messages in dmesg) > > Then I try adding 08:0e.0 and 00:14.4 to the VM and I get this error message: > > libvirtError: this function is not supported by the connection driver: > Unable to reset PCI device 0000:00:14.4: no FLR, PM reset or bus reset > available > > There is nothing written to test.log when you try to start the VM with > 00:14.4 attached. > > At this point libvirt goes screwy and I have to restart it before I > can remove 00:14.4 from the VM. > > However, once I've done THAT, starting the VM gets the different error > message in test.log and a new dmesg: > > 2011-02-23 19:21:13.483: starting up > LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin > QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.14 -enable-kvm -m 512 -smp > 3,sockets=3,cores=1,threads=1 -name test -uuid > 307bfcd2-9dec-29b7-1b4d-c46cd9d7cdbc -nodefconfig -nodefaults -chardev > socket,id=charmonitor,path=/var/lib/libvirt/qemu/test.monitor,server,nowait > -mon chardev=charmonitor,id=monitor,mode=readline -rtc base=utc -boot > order=cd,menu=off -drive > file=/var/lib/libvirt/images/test.img,if=none,id=drive-virtio-disk0,boot=on,format=raw > -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,id=virtio-disk0 > -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw > -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 > -netdev tap,fd=57,id=hostnet0 -device > virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:7d:32:7c,bus=pci.0,addr=0x3 > -chardev pty,id=charserial0 -device > isa-serial,chardev=charserial0,id=serial0 -usb -vnc 127.0.0.1:0 -vga > cirrus -device pci-assign,host=08:06.0,id=hostdev0,configfd=58,bus=pci.0,addr=0x6 > -device pci-assign,host=08:06.1,id=hostdev1,configfd=59,bus=pci.0,addr=0x7 > -device pci-assign,host=08:06.2,id=hostdev2,configfd=60,bus=pci.0,addr=0x8 > -device pci-assign,host=08:0e.0,id=hostdev3,configfd=61,bus=pci.0,addr=0xa > -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 > char device redirected to /dev/pts/1 > kvm: -device virtio-net-pci,netdev=hostnet0,id=net0,mac=52:54:00:7d:32:7c,bus=pci.0,addr=0x3: > pci_add_option_rom: failed to find romfile "pxe-virtio.bin" > Using raw in/out ioport access (sysfs - Input/output error) > Failed to assign irq for "hostdev0": Operation not permitted > Perhaps you are assigning a device that shares an IRQ with another device? > kvm: -device pci-assign,host=08:06.0,id=hostdev0,configfd=58,bus=pci.0,addr=0x6: > Device 'pci-assign' could not be initialized > 2011-02-23 19:21:13.958: shutting down > > dmesg: > http://pastebin.com/70D26xp4 > > This bit is different: > > [ Â201.625221] uhci_hcd 0000:08:06.0: remove, state 4 > [ Â201.625237] usb usb4: USB disconnect, address 1 > [ Â201.625514] uhci_hcd 0000:08:06.0: USB bus 4 deregistered > [ Â201.625595] uhci_hcd 0000:08:06.0: PCI INT A disabled > [ Â201.626028] pci-stub 0000:08:06.0: claimed by stub > [ Â201.631922] uhci_hcd 0000:08:06.1: remove, state 4 > [ Â201.631937] usb usb9: USB disconnect, address 1 > [ Â201.632195] uhci_hcd 0000:08:06.1: USB bus 9 deregistered > [ Â201.632274] uhci_hcd 0000:08:06.1: PCI INT B disabled > [ Â201.632419] pci-stub 0000:08:06.1: claimed by stub > [ Â201.638160] ehci_hcd 0000:08:06.2: remove, state 1 > [ Â201.638172] usb usb10: USB disconnect, address 1 > [ Â201.638178] usb 10-1: USB disconnect, address 2 > [ Â201.721626] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully > deinitialized and disconnected. > [ Â201.721990] ehci_hcd 0000:08:06.2: USB bus 10 deregistered > [ Â201.722126] ehci_hcd 0000:08:06.2: PCI INT C disabled > [ Â201.725042] pci-stub 0000:08:06.2: claimed by stub > [ Â201.731830] firewire_ohci 0000:08:0e.0: PCI INT A disabled > [ Â201.731838] firewire_ohci: Removed fw-ohci device. > [ Â201.732536] pci-stub 0000:08:0e.0: claimed by stub > [ Â202.303880] device vnet0 entered promiscuous mode > [ Â202.305184] virbr0: topology change detected, propagating > [ Â202.305193] virbr0: port 1(vnet0) entering forwarding state > [ Â202.305199] virbr0: port 1(vnet0) entering forwarding state > [ Â202.433007] pci-stub 0000:08:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > [ Â202.470076] pci-stub 0000:08:06.0: restoring config space at offset > 0x1 (was 0x2100000, writing 0x2100001) > [ Â202.697270] assign device 0:8:6.0 > [ Â202.697325] deassign device 0:8:6.0 > [ Â202.730080] pci-stub 0000:08:06.0: restoring config space at offset > 0x1 (was 0x2100000, writing 0x2100001) > [ Â202.730107] pci-stub 0000:08:06.0: PCI INT A disabled > > This time the pci-stub claimed lines are not all bunched up and there > is only one per device, rather than three per device. > Also for the first time it says "assign device 0:8:6.0" rather than > "assign device 0:8:6.0 failed" > It them immediately deassigns the device and stops. > > test.log shows: > > Failed to assign irq for "hostdev0": Operation not permitted > Perhaps you are assigning a device that shares an IRQ with another device? > > lspsci -vv for the relevant devices shows: > http://pastebin.com/EUtUMj8x > > 00:14.4 now appears to be using pci-stub as it's driver, as well as > 08:06.1, 2, 3 but not 0e.0 > > Anyway, that's all for now. > I think I'll try 'amd_iommu_dump' next, does it write to dmesg? > > Many Thanks, > > James. > OK, here's my latest dmesg with amd_iommu_dump and debug with no quiet http://pastebin.com/JxEwvqRA I've just figured out a sequence of "echo DEV > PATH" commands to call for 14.4 gets me past the "claimed by pci-stub" error and gets me to the "failed to assign IRQ" error. I'm going to narrow down the required sequence and then post it. Regards, James. -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
