On 2011-02-03 20:01, Blue Swirl wrote: > On Thu, Feb 3, 2011 at 6:01 PM, Jan Kiszka <jan.kiszka@xxxxxxxxxxx> wrote: >> On 2011-02-03 18:54, Blue Swirl wrote: >>> On Thu, Feb 3, 2011 at 5:43 PM, Jan Kiszka <jan.kiszka@xxxxxxxxxxx> wrote: >>>> On 2011-02-03 18:36, Blue Swirl wrote: >>>>> On Thu, Feb 3, 2011 at 5:18 PM, Jan Kiszka <jan.kiszka@xxxxxxxxxxx> wrote: >>>>>> On 2011-02-03 18:03, Blue Swirl wrote: >>>>>>> On Thu, Feb 3, 2011 at 2:55 PM, Jan Kiszka <jan.kiszka@xxxxxxxxxxx> wrote: >>>>>>>> The registers of real IOAPICs can be relocated during runtime (via >>>>>>>> chipset registers). We don't support this yet, but qemu-kvm carries the >>>>>>>> current base address in its version 2 vmstate. >>>>>>>> >>>>>>>> To align both implementations for migratability, add the proper >>>>>>>> infrastructure to accept initial as well as updated base addresses and >>>>>>>> include the current address in the vmstate. This is done in a way that >>>>>>>> will also allow multiple IOAPICs in the future. >>>>>>> >>>>>>> Nack, the addresses should be device properties. >>>>>> >>>>>> Hmm.... we could make default_base_address a property. Will change that. >>>>>> But current_base_address is just the same as apicbase and can't be a >>>>>> property. >>>>> >>>>> Oh, right. What will current_base_address used for? Why can't board >>>>> just unmap IOAPIC from current address and remap it at the new >>>>> address? Then the device would not need to know its base address. >>>> >>>> The board could do this. The question is where we put this service, in >>>> the context if the IOAPIC as ioapic_set_base_address (compare to >>>> cpu_set_apic_base - which is buggy as it lacks sysbus_mmio_map) or into >>>> each and every board code. In the latter case, the boards would also be >>>> responsible for saving/restoring the address. >>> >>> How is the device relocated? Where are the chipset registers you mention? >> >> Intel's PIIX chipsets contain a register called APICBASE (but it means >> the IOAPIC), and that defines the location. The analogy in the APIC >> world is the MSR_IA32_APICBASE which we maintain via the APIC state. > > In ICH10 the register is called OICâOther Interrupt Control Register > and the interesting bits APIC Range Select (ASEL). > > So actually PIIX should manage IOAPIC mapping, not board level. The point is we need ioapic_set_base_address logic in multiple places (once chipsets start to implement it). Better push it to a central place from the beginning. Also the bit keeping. There is no difference to apicbase. Jan -- Siemens AG, Corporate Technology, CT T DE IT 1 Corporate Competence Center Embedded Linux -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
