Re: [KVM TSC trapping / migration 2/2] Add TSC KHZ MSR

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Marcelo Tosatti <mtosatti@xxxxxxxxxx> wrote:
> On Fri, Jan 07, 2011 at 10:44:20AM -1000, Zachary Amsden wrote:
>> On 01/07/2011 12:48 AM, Marcelo Tosatti wrote:
>> >On Thu, Jan 06, 2011 at 12:10:45AM -1000, Zachary Amsden wrote:
>> >>Use an MSR to allow "soft" migration to hosts which do not support
>> >>TSC trapping.  Rather than make this a required element of any
>> >>migration protocol, we allow the TSC rate to be exported as a data
>> >>field (useful in its own right), but we also allow a one time write
>> >>of the MSR during VM creation.  The result is that for the common
>> >>use case, no protocol change is required to communicate TSC rate
>> >>to the receiving host.
>> >Migration to hosts which do not support the feature can be achieved by
>> >saving/restoring the TSC rate + flags in a subsection. A subsection
>> >seems more appropriate than an MSR for this.
>> 
>> Yes, I looked at that, but it looked to me like a subsection was
>> intended for an optional feature which MUST be present on the
>> destination if the source is using the feature.  This way, newer
>> hosts without the feature enabled can migrate to older hosts which
>> do not support the feature.
>
> Right. But you can use a subsection to achieve the same effect. Just
> consider that the source is not using the feature if you want to migrate
> to an older host without support for it. Juan, is there a problem to
> use subsections in this fashion?
>
> With the MSR scheme, there is no way for management to enforce support
> of the feature on the destination (at least not that i can see). And 
> you create an MSR that does not exist on real hardware.
>
>> 
>> The TSC rate migration is slightly different; we may wish to migrate
>> from a host with the TSC rate feature enabled to a host which does
>> not support the TSC rate feature.  This is exactly the current
>> behavior, the TSC rate will change on that migration, and I wanted
>> to preserve that behavior.  I don't advise that mode of usage, but
>> there may be use cases for it and it should be decided by policy,
>> not dictated by our feature set.
>> 
>> That said, I'm happy to remove the MSR if we truly don't want to
>> support that mode of usage.

Ok, I chime it late.

We are adding a new MSR to the comunication with userspace.  So far so
good, but this new field, need to be transmited to the "other end" of
the migration.  This means a new field for migration (notice that this
is independtly if this is an MSR or not).

        VMSTATE_UINT64_V(system_time_msr, CPUState, 11),
        VMSTATE_UINT64_V(wall_clock_msr, CPUState, 11),

This are the values that we are sending now.
We are getting now, a new value, the problem is how to migrate it.

Solutions:
- create a new field in a new field in CPUState, and up the version.
  That would make backward migration impossible.
- create a new field, and sent it only it is has been used with a
  subsection.  This makes migration backwards if this was not used.

- but, it appears that there if this features is not "known" on
  destination, we can use the old way to migrate information.

  BIG WARNING HERE: I don't claim to understand how clocks work at all

  There is not a way to convince old qemu/kernels to ignore new fields
  for good reason.  So the only solution here is to encode this new
  vcpu->kvm->arch.virtual_tsc_khz in the two previous fields, in a way
  that is understable for old qemu/new qemu.  old qemu will use old
  method, new qemu will use a new method.

  If there is not a common encoding that will work for both old/new
  method, I can't really think of a way to make things work here :(

And as per the warning, I can't think of a way to encode
"virtual_tsc_khz" into "system_time_msr" and "wall_clock_msr" off-hand.

To make things clearer about optional features, after "lots" of
discussions, it was decided that target of migration will never ignore
anything sent, that means that the only one that can decide not to sent
a feature/value is the "source" of the migration.  There is no way to
express:

- try this method, if you don't know
- try this other second best, ...

and so on.


Later, Juan.





--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux