From: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
Adds API documentation for KVM_[DE]ASSIGN_PCI_DEVICE,
KVM_[DE]ASSIGN_DEV_IRQ, KVM_SET_GSI_ROUTING, KVM_ASSIGN_SET_MSIX_NR, and
KVM_ASSIGN_SET_MSIX_ENTRY.
Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
---
Documentation/kvm/api.txt | 178 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 178 insertions(+), 0 deletions(-)
diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index b336266..e1a9297 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -1085,6 +1085,184 @@ of 4 instructions that make up a hypercall.
If any additional field gets added to this structure later on, a bit for that
additional piece of information will be set in the flags bitmap.
+4.47 KVM_ASSIGN_PCI_DEVICE
+
+Capability: KVM_CAP_DEVICE_ASSIGNMENT
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_pci_dev (in)
+Returns: 0 on success, -1 on error
+
+Assigns a host PCI device to the VM.
+
+struct kvm_assigned_pci_dev {
+ __u32 assigned_dev_id;
+ __u32 busnr;
+ __u32 devfn;
+ __u32 flags;
+ __u32 segnr;
+ union {
+ __u32 reserved[11];
+ };
+};
+
+The PCI device is specified by the triple segnr, busnr, and devfn.
+Identification in succeeding service requests is done via assigned_dev_id. The
+following flags are specified:
+
+/* Depends on KVM_CAP_IOMMU */
+#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
+
+4.48 KVM_DEASSIGN_PCI_DEVICE
+
+Capability: KVM_CAP_DEVICE_DEASSIGNMENT
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_pci_dev (in)
+Returns: 0 on success, -1 on error
+
+Ends PCI device assignment, releasing all associated resources.
+
+See KVM_CAP_DEVICE_ASSIGNMENT for the data structure. Only assigned_dev_id is
+used in kvm_assigned_pci_dev to identify the device.
+
+4.49 KVM_ASSIGN_DEV_IRQ
+
+Capability: KVM_CAP_ASSIGN_DEV_IRQ
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_irq (in)
+Returns: 0 on success, -1 on error
+
+Assigns an IRQ to a passed-through device.
+
+struct kvm_assigned_irq {
+ __u32 assigned_dev_id;
+ __u32 host_irq;
+ __u32 guest_irq;
+ __u32 flags;
+ union {
+ struct {
+ __u32 addr_lo;
+ __u32 addr_hi;
+ __u32 data;
+ } guest_msi;
+ __u32 reserved[12];
+ };
+};
+
+The following flags are defined:
+
+#define KVM_DEV_IRQ_HOST_INTX (1 << 0)
+#define KVM_DEV_IRQ_HOST_MSI (1 << 1)
+#define KVM_DEV_IRQ_HOST_MSIX (1 << 2)
+
+#define KVM_DEV_IRQ_GUEST_INTX (1 << 8)
+#define KVM_DEV_IRQ_GUEST_MSI (1 << 9)
+#define KVM_DEV_IRQ_GUEST_MSIX (1 << 10)
+
+It is not valid to specify multiple types per host or guest IRQ. However, the
+IRQ type of host and guest can differ or can even be null.
+
+4.50 KVM_DEASSIGN_DEV_IRQ
+
+Capability: KVM_CAP_ASSIGN_DEV_IRQ
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_irq (in)
+Returns: 0 on success, -1 on error
+
+Ends an IRQ assignment to a passed-through device.
+
+See KVM_ASSIGN_DEV_IRQ for the data structure. The target device is specified
+by assigned_dev_id, flags must correspond to the IRQ type specified on
+KVM_ASSIGN_DEV_IRQ. Partial deassignment of host or guest IRQ is allowed.
+
+4.51 KVM_SET_GSI_ROUTING
+
+Capability: KVM_CAP_IRQ_ROUTING
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_irq_routing (in)
+Returns: 0 on success, -1 on error
+
+Sets the GSI routing table entries, overwriting any previously set entries.
+
+struct kvm_irq_routing {
+ __u32 nr;
+ __u32 flags;
+ struct kvm_irq_routing_entry entries[0];
+};
+
+No flags are specified so far, the corresponding field must be set to zero.
+
+struct kvm_irq_routing_entry {
+ __u32 gsi;
+ __u32 type;
+ __u32 flags;
+ __u32 pad;
+ union {
+ struct kvm_irq_routing_irqchip irqchip;
+ struct kvm_irq_routing_msi msi;
+ __u32 pad[8];
+ } u;
+};
+
+/* gsi routing entry types */
+#define KVM_IRQ_ROUTING_IRQCHIP 1
+#define KVM_IRQ_ROUTING_MSI 2
+
+No flags are specified so far, the corresponding field must be set to zero.
+
+struct kvm_irq_routing_irqchip {
+ __u32 irqchip;
+ __u32 pin;
+};
+
+struct kvm_irq_routing_msi {
+ __u32 address_lo;
+ __u32 address_hi;
+ __u32 data;
+ __u32 pad;
+};
+
+4.52 KVM_ASSIGN_SET_MSIX_NR
+
+Capability: KVM_CAP_DEVICE_MSIX
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_msix_nr (in)
+Returns: 0 on success, -1 on error
+
+Set the number of MSI-X interrupts for an assigned device. This service can
+only be called once in the lifetime of an assigned device.
+
+struct kvm_assigned_msix_nr {
+ __u32 assigned_dev_id;
+ __u16 entry_nr;
+ __u16 padding;
+};
+
+#define KVM_MAX_MSIX_PER_DEV 256
+
+4.53 KVM_ASSIGN_SET_MSIX_ENTRY
+
+Capability: KVM_CAP_DEVICE_MSIX
+Architectures: x86 ia64
+Type: vm ioctl
+Parameters: struct kvm_assigned_msix_entry (in)
+Returns: 0 on success, -1 on error
+
+Specifies the routing of an MSI-X assigned device interrupt to a GSI. Setting
+the GSI vector to zero means disabling the interrupt.
+
+struct kvm_assigned_msix_entry {
+ __u32 assigned_dev_id;
+ __u32 gsi;
+ __u16 entry; /* The index of entry in the MSI-X table */
+ __u16 padding[3];
+};
+
5. The kvm_run structure
Application code obtains a pointer to the kvm_run structure by
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
