Re: [PATCHv4 15/15] Pass boot device list to firmware.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2010/11/15 Gleb Natapov <gleb@xxxxxxxxxx>:
> On Sun, Nov 14, 2010 at 10:50:13PM +0000, Blue Swirl wrote:
>> On Sun, Nov 14, 2010 at 3:39 PM, Gleb Natapov <gleb@xxxxxxxxxx> wrote:
>> >
>> > Signed-off-by: Gleb Natapov <gleb@xxxxxxxxxx>
>> > ---
>> > Âhw/fw_cfg.c | Â 14 ++++++++++++++
>> > Âhw/fw_cfg.h | Â Â4 +++-
>> > Âsysemu.h  Â|  Â1 +
>> > Âvl.c    Â|  51 +++++++++++++++++++++++++++++++++++++++++++++++++++
>> > Â4 files changed, 69 insertions(+), 1 deletions(-)
>> >
>> > diff --git a/hw/fw_cfg.c b/hw/fw_cfg.c
>> > index 7b9434f..f6a67db 100644
>> > --- a/hw/fw_cfg.c
>> > +++ b/hw/fw_cfg.c
>> > @@ -53,6 +53,7 @@ struct FWCfgState {
>> > Â Â FWCfgFiles *files;
>> > Â Â uint16_t cur_entry;
>> > Â Â uint32_t cur_offset;
>> > + Â ÂNotifier machine_ready;
>> > Â};
>> >
>> > Âstatic void fw_cfg_write(FWCfgState *s, uint8_t value)
>> > @@ -315,6 +316,15 @@ int fw_cfg_add_file(FWCfgState *s, Âconst char *filename, uint8_t *data,
>> > Â Â return 1;
>> > Â}
>> >
>> > +static void fw_cfg_machine_ready(struct Notifier* n)
>> > +{
>> > + Â Âuint32_t len;
>> > + Â Âchar *bootindex = get_boot_devices_list(&len);
>> > +
>> > + Â Âfw_cfg_add_bytes(container_of(n, FWCfgState, machine_ready),
>> > + Â Â Â Â Â Â Â Â Â Â FW_CFG_BOOTINDEX, (uint8_t*)bootindex, len);
>> > +}
>> > +
>> > ÂFWCfgState *fw_cfg_init(uint32_t ctl_port, uint32_t data_port,
>> > Â Â Â Â Â Â Â Â Â Â Â Â target_phys_addr_t ctl_addr, target_phys_addr_t data_addr)
>> > Â{
>> > @@ -343,6 +353,10 @@ FWCfgState *fw_cfg_init(uint32_t ctl_port, uint32_t data_port,
>> > Â Â fw_cfg_add_i16(s, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
>> > Â Â fw_cfg_add_i16(s, FW_CFG_BOOT_MENU, (uint16_t)boot_menu);
>> >
>> > +
>> > + Â Âs->machine_ready.notify = fw_cfg_machine_ready;
>> > + Â Âqemu_add_machine_init_done_notifier(&s->machine_ready);
>> > +
>> > Â Â return s;
>> > Â}
>> >
>> > diff --git a/hw/fw_cfg.h b/hw/fw_cfg.h
>> > index 856bf91..4d61410 100644
>> > --- a/hw/fw_cfg.h
>> > +++ b/hw/fw_cfg.h
>> > @@ -30,7 +30,9 @@
>> >
>> > Â#define FW_CFG_FILE_FIRST Â Â Â 0x20
>> > Â#define FW_CFG_FILE_SLOTS Â Â Â 0x10
>> > -#define FW_CFG_MAX_ENTRY Â Â Â Â(FW_CFG_FILE_FIRST+FW_CFG_FILE_SLOTS)
>> > +#define FW_CFG_FILE_LAST_SLOT Â (FW_CFG_FILE_FIRST+FW_CFG_FILE_SLOTS)
>> > +#define FW_CFG_BOOTINDEX Â Â Â Â(FW_CFG_FILE_LAST_SLOT + 1)
>> > +#define FW_CFG_MAX_ENTRY Â Â Â ÂFW_CFG_BOOTINDEX
>>
>> This should be
>> #define FW_CFG_MAX_ENTRY Â Â Â Â(FW_CFG_BOOTINDEX + 1)
>> because the check is like this:
>> Â Â if ((key & FW_CFG_ENTRY_MASK) >= FW_CFG_MAX_ENTRY) {
>> Â Â Â Â s->cur_entry = FW_CFG_INVALID;
>>
> Yeah, will fix.
>
>> With that change, I got the bootindex passed to OpenBIOS:
>> OpenBIOS for Sparc64
>> Configuration device id QEMU version 1 machine id 0
>> kernel cmdline
>> CPUs: 1 x SUNW,UltraSPARC-IIi
>> UUID: 00000000-0000-0000-0000-000000000000
>> bootindex num_strings 1
>> bootindex /pbm@000001fe00000000/ide@5/drive@1/disk@0
>>
>> The device path does not match exactly, but it's close:
>> /pci@1fe,0/pci-ata@5/ide1@600/disk@0
>
> pbm->pci should be solvable by the patch at the end. Were in the spec
> it is allowed to abbreviate 1fe00000000 as 1fe,0? Spec allows to drop
> starting zeroes but TARGET_FMT_plx definition in targphys.h has 0 after
> %. I can define another one without leading zeroes. Can you suggest
> a name?

I think OpenBIOS for Sparc64 is not correct here, so it may be a bad
reference architecture. OBP on a real Ultra-5 used a path like this:
/pci@1f,0/pci@1,1/ide@3/disk@0,0

pci@1f,0 specifies the PCI host bridge at UPA bus port ID of 0x1f.
pci@1,1 specifies a PCI-PCI bridge.

>ÂTARGET_FMT_lx is poisoned. As of ATA there is no open firmware
> binding spec for ATA, so everyone does what he pleases. I based my
> implementation on what open firmware showing when running on qemu x86.
> "pci-ata" should be "ide" according to PCI binding spec :)

Yes, for example there is no ATA in the Ultra-5 tree but in UltraAX it exists:
/pci@1f,4000/ide@3/ata@0,0/cmdk@0,0

> diff --git a/hw/apb_pci.c b/hw/apb_pci.c
> index c619112..643aa49 100644
> --- a/hw/apb_pci.c
> +++ b/hw/apb_pci.c
> @@ -453,6 +453,7 @@ static PCIDeviceInfo pbm_pci_host_info = {
>
> Âstatic SysBusDeviceInfo pbm_host_info = {
> Â Â .qdev.name = "pbm",
> + Â Â.qdev.fw_name = "pci",

Perhaps the FW path should use device class names if no name is specified.

I'll try Sparc32 to see how this fits there.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux