Gleb Natapov <gleb@xxxxxxxxxx> writes: > On Thu, Nov 04, 2010 at 03:22:50PM +0100, Markus Armbruster wrote: >> Gleb Natapov <gleb@xxxxxxxxxx> writes: >> >> > On Thu, Nov 04, 2010 at 09:46:57AM +0100, Markus Armbruster wrote: >> >> > But why order of device creation is important? It shouldn't be if we >> >> > want to move HW description into config file. We even may allow creating >> >> > piix3-ide with only second IDE bus, but not first. >> >> >> >> That's not how buses work in qdev. >> >> >> >> Configuration file, command line and monitor configure *devices*. >> >> Devices need to be created after the device providing their parent bus, >> >> obviously. Other than that, order should not matter. >> >> >> > Correct, but it will if we use your function for looking for IDEBus id. >> > See below. >> >> Where I'll explain why device order creation can't affect bus numbers. >> > Bus order creation will affect bus number thought. Yes, but that order is completely arbitrary in the code, so you can just as well create the buses in the natural order. >> >> Buses are always created by device model code. Thus, creation order is >> >> fixed in code. Thus defining bus number in terms of creation order is >> >> fine. >> > So I can't create piix3-ide with only one bus. Looks like arbitrary >> > limitation for me. >> >> If it has just one bus, it's simply not piix3-ide anymore. The real >> PIIX3 PCI device has an IDE function that provides two channels, no >> more, no less. >> > We are doing mental exercise to see if our design is flexible enough Fair enough. What I mean to say is that a device's buses are an integral part of it, not something that's pluggable. >> >> If we create piix3-ide with only the second bus (for the sake of >> >> argument), then its bus number is zero by definition, as clarified by >> >> you below. Unless you want to amend your definition :) >> >> >> > As clarified by me below in case of piix3-ide bus number is actually >> > used to figure out how to talk to device on that bus. So if (for >> > the sake of argument of course) we will create piix3-ide device with >> > only secondary bus (the one accessible through BAR2,3 of piix3-ide), >> > device sitting on it will be named ide@0 since there will be only one >> > bus on piix3-ide. Given name ide@0 guest will try to use BAR0,1 and >> > fail. I understand that such config is not possible today (at least >> > with piix3-ide) but it is important to understand that this is not >> > "just a number showing in which order bus was created" >> >> Why would a hypothetical piix3-ide with just one IDE channel >> nevertheless expose BARs for *two* IDE channels? >> >> To me it looks like the need for "holes" in the bus number sequence is >> purely theoretical. >> > And to me it looks like relying on implicit bus ordering may limit us in > the situation too. > >> >> >> >> > Are you against adding bus_id >> >> >> >> > to IDEBus? >> >> >> >> >> >> >> >> "Against" is too hard a word. If it's a general question, I'd prefer a >> >> >> >> general answer. >> >> >> > It is as general as "what pci slot/func of a pci device". We store those >> >> >> > in PCIDevice. >> >> >> >> >> >> It's actually more general than that :) >> >> >> >> >> >> PCI slot.function is the address of a PCI device on its parent bus. >> >> >> It's specific to PCI buses. >> >> >> >> >> >> The bus number is the "address" of a bus on its parent device. It's the >> >> >> same regardless of the device. >> >> >> >> >> > In case of IDE bus siting on piix3-ide it is not just arbitrary number >> >> > like you suggest here. It actually tells how to talk to a device. IDE >> >> > bus 0 is reachable through BAR0,1 of piix3-ide and IDE bus 1 is reachable >> >> > through BAR2,3. So this number is part of the device address as much as >> >> > pci slot/func is. >> >> >> >> What I mean to say: regardless of what the device is, or what kind of >> >> buses it provides, the buses can *always* be identified the same way: >> >> define an order, identify bus by ordinal number. >> > Only if you always create them all and in the correct order. Then, just by >> > coincidence (not by design), your assertion above will be true. >> >> By definition of bus number, not by coincidence. >> >> It's trivial to create buses in order. It also ensures the numbers are >> sane: start with 0, no holes. > In case of piix3-ide I agree it is indeed trivial to create them in > order, but are you sure about all other, not yet implemented, cases? Bus creation is basically "malloc the bus state, initialize it, add to the parent's list of children". Can't see how we could get dependencies in there. >> Passing bus numbers explicitly isn't hard either. Programmer is free to >> pass nonsensical numbers. For the most common case of one bus, the bus >> number parameter is just noise. > If programmer makes an error this is a bug that should be fixed. > >> >> There are two disputed issues here: >> >> 1. Whether to pass bus numbers explicitly or not. I'd prefer not. But >> I won't insist on it. >> >> 2. Whether bus numbers are IDE specific or general. In my opinion, they >> are general. >> > Do we have other cases of device providing two buses in qemu tree now? > I prefer to do it only for piix3-ide for now and change it later if > this is a common pattern. A quick, superficial search finds device buses function creating them corgi-ssp 3 x SSI corgi_ssp_init() evb6965-ssi 2 x SSI stellaris_ssi_bus_init() cmd646-ide 2 x IDE pci_cmd646_ide_initfn() piix[34]-ide 2 x IDE pci_piix_ide_initfn() via-ide 2 x IDE vt82c686b_ide_initfn() It's even conceivable that one device provides two different kinds of buses. I'd expect sane PCI devices to use separate functions for that, but not everything's PCI, and not everything's sane. >> >> Because of that, I believe the concept "bus number" should be a generic >> >> qdev concept, not special to IDE buses. >> > If you think that other devices may benefit from "bus number" I can >> > move it into BusState. Important thing is that "bus number" should >> > be determined by bus creator and should be independent from order of >> > creation. The thing is other devices may use other means to address >> > different buses. For instance system bus may have two PCI domains >> > one is addressable via 0x0cf8 IO port another is addressable through >> > MMIO address 0xf8000000. "bus number" is meaningless for those two >> > buses. Instead one of them will be named pci@i0cf8 and another one is >> > pci@f8000000. >> >> The system bus doesn't "have two PCI domains". There are *devices* >> providing PCI buses on the system bus. >> > Correct. Not a good example indeed. I can't think of other device with > two buses except piix3_ide. > >> In your example, there are two such devices on the system bus. One with >> configuration I/O port 0x0cf8, and one with memory-mapped configuration >> at 0xf8000000. Bus number is indeed meaningless, because a bus number >> numbers a device's buses, not the system bus's devices! >> >> Devices are identified by their address on the parent bus. The >> addressing scheme is specific to the parent bus type. >> >> Buses are identified by their bus number within their parent device. >> The addressing scheme is always the same: ordinal number. >> >> >> > I agree it is conceptually wrong. It is not even needed for unique device >> >> > path generation. It is only needed to make both IDE buses configurable >> >> > from command line in ISA machine. I'll drop it in favor of other solution, >> >> > but qdev has to rethink how devices should it addressable from command >> >> > line. Current way is broken. >> >> >> >> I agree it's broken and needs fixing. I appreciate you trying to fix >> >> it, but it indeed looks like it's better to fix it separately. >> >> >> > OK. >> > >> >> >> >> >> >> Perhaps we can treat the non-addressability of -M isapc's second IDE bus >> >> >> as a separate problem. >> >> >> >> >> > Agree, hence I will not use this patch and will get back to just >> >> > recording bus_id. But -M isapc is just a symptom of much more serious >> >> > problem in qdev. The way devices addressable there is not well defined. >> >> > Two devices may have the same device path. Ultimately I think qdev >> >> > should use device addresses similar to what I am trying to achieve here. >> >> > For ISA machine it should automatically generate ids like isa-ide@0x170 >> >> > for first isa IDE controller and isa-ide@0x1f0 for second one. And get >> >> > rid of user assigned ids. They are good for nothing and exist only >> >> > because qdev developer didn't agree on how to name devices. >> >> >> >> Yes, ambigous paths are a well-known problem. For user-defined devices, >> >> users can define the (unique) ID, which provides an unambigous path. >> > This is just dropping problem onto a user. Qemu is capable to >> > create unique ids by itself. Advantage is that it will work for >> > internally create devices and user-defined devices. >> >> IDs are a user feature. The user has full control over them. If we >> created IDs automatically, they could clash with the user's. >> > That is why I am saying that it is misfeature. It should have been > automatically created for all devices. Automatically created IDs tend to suck for human users. Yes, the problem could have been avoided with a bit more thought. Too bad. We'll fix it. >> The problem is that our rules what to do when the user didn't assign ID >> are broken. Yes, we should make sure every device has an unambigous >> name even then. More so for devices created automatically. >> >> >> But default devices don't have one. When we have two of identical >> >> devices without ID on the same bus, their paths become ambigous. >> >> >> >> There has been quite some discussion on "canonical path" on the list, >> >> but no consensus. Ironically, one of the places where we got stuck was >> >> ISA. You cut right through that, so that's progress. Maybe people >> >> aren't looking ;) >> > That is funny since the problem was already solved looong time ago. Just >> > look at Open Firmware device path. They are capable of addressing all >> > devices just fine, ISA devices included. What specific problem you had >> > with ISA bus? >> >> Lack of consensus. I was in favour of using I/O base, just like you do. >> There were worries about ISA devices not using any I/O ports. > There is a solution for that problem for almost 15 years and we are > still looking for consensus on qemu list?! Here is ISA device binding > spec for Open Firmware: http://playground.sun.com/1275/bindings/isa/isa0_4d.ps > If ISA device have no IO ports MMIO is used. Precedence should promote consensus, but it can't replace it. If you can push the list to consensus, more power to you. -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
