Re: [PATCH 5/5] virtio-net: Switch default to new bottom half TX handler for iothread

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 31, 2010 at 11:32 PM, Alex Williamson
<alex.williamson@xxxxxxxxxx> wrote:
> On Tue, 2010-08-31 at 23:25 +0300, Michael S. Tsirkin wrote:
>> On Fri, Aug 27, 2010 at 04:37:45PM -0600, Alex Williamson wrote:
>> > The bottom half handler shows big improvements over the timer
>> > with few downsides, default to it when the iothread is enabled.
>> >
>> > Using the following tests, with the guest and host connected
>> > via tap+bridge:
>> >
>> > guest> netperf -t TCP_STREAM -H $HOST
>> > host> netperf -t TCP_STREAM -H $GUEST
>> > guest> netperf -t UDP_STREAM -H $HOST
>> > host> netperf -t UDP_STREAM -H $GUEST
>> > guest> netperf -t TCP_RR -H $HOST
>> >
>> > Results: base throughput, exits/throughput ->
>> >                    patched throughput, exits/throughput
>> >
>> > --enable-io-thread
>> > TCP guest->host 2737.77, 47.82  -> 6767.09, 29.15 = 247%, 61%
>> > TCP host->guest 2231.33, 74.00  -> 4125.80, 67.61 = 185%, 91%
>> > UDP guest->host 6281.68, 14.66  -> 12569.27, 1.98 = 200%, 14%
>> > UDP host->guest 275.91,  289.22 -> 264.80, 293.53 = 96%, 101%
>> > interations/s   1949.65, 82.97  -> 7417.56, 84.31 = 380%, 102%
>> >
>> > No --enable-io-thread
>> > TCP guest->host 3041.57, 55.11 -> 1038.93, 517.57 = 34%, 939%
>> > TCP host->guest 2416.03, 76.67 -> 5655.92, 55.52  = 234%, 72%
>> > UDP guest->host 12255.82, 6.11 -> 7775.87, 31.32  = 63%, 513%
>> > UDP host->guest 587.92, 245.95 -> 611.88, 239.92  = 104%, 98%
>> > interations/s   1975.59, 83.21 -> 8935.50, 88.18  = 452%, 106%
>> >
>> > Signed-off-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
>>
>> parameter having different settings based on config
>> options might surprise some users. I don't think
>> we really need a parameter here ...
>
> I'm not a bit fan of this either, but I'd also prefer not to introduce a
> regression for a performance difference we know about in advance.  It
> gets even more complicated when we factor in qemu-kvm, as it doesn't
> build with iothread enabled, but seems to get and even better boost in
> performance across the board thanks largely to the kvm-irqchip.  Should
> we instead make this a configure option?  --enable-virtio-net-txbh?
> Thanks,
>
> Alex

qemu-kvm uses its own iothread implementation by default.  It doesn't
need --enable-io-thread because it already uses a similar model.

Stefan

>
>> > ---
>> >
>> >  hw/s390-virtio-bus.c |    3 ++-
>> >  hw/syborg_virtio.c   |    3 ++-
>> >  hw/virtio-pci.c      |    3 ++-
>> >  hw/virtio.h          |    6 ++++++
>> >  4 files changed, 12 insertions(+), 3 deletions(-)
>> >
>> > diff --git a/hw/s390-virtio-bus.c b/hw/s390-virtio-bus.c
>> > index 1483362..985f99a 100644
>> > --- a/hw/s390-virtio-bus.c
>> > +++ b/hw/s390-virtio-bus.c
>> > @@ -328,7 +328,8 @@ static VirtIOS390DeviceInfo s390_virtio_net = {
>> >      .qdev.size = sizeof(VirtIOS390Device),
>> >      .qdev.props = (Property[]) {
>> >          DEFINE_NIC_PROPERTIES(VirtIOS390Device, nic),
>> > -        DEFINE_PROP_UINT32("txtimer", VirtIOS390Device, txtimer, 1),
>> > +        DEFINE_PROP_UINT32("txtimer", VirtIOS390Device, txtimer,
>> > +                           TXTIMER_DEFAULT),
>> >          DEFINE_PROP_INT32("txburst", VirtIOS390Device, txburst, 256),
>> >          DEFINE_PROP_END_OF_LIST(),
>> >      },
>> > diff --git a/hw/syborg_virtio.c b/hw/syborg_virtio.c
>> > index 7b76972..ee5746d 100644
>> > --- a/hw/syborg_virtio.c
>> > +++ b/hw/syborg_virtio.c
>> > @@ -300,7 +300,8 @@ static SysBusDeviceInfo syborg_virtio_net_info = {
>> >      .qdev.props = (Property[]) {
>> >          DEFINE_NIC_PROPERTIES(SyborgVirtIOProxy, nic),
>> >          DEFINE_VIRTIO_NET_FEATURES(SyborgVirtIOProxy, host_features),
>> > -        DEFINE_PROP_UINT32("txtimer", SyborgVirtIOProxy, txtimer, 1),
>> > +        DEFINE_PROP_UINT32("txtimer", SyborgVirtIOProxy, txtimer,
>> > +                           TXTIMER_DEFAULT),
>> >          DEFINE_PROP_INT32("txburst", SyborgVirtIOProxy, txburst, 256),
>> >          DEFINE_PROP_END_OF_LIST(),
>> >      }
>> > diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
>> > index e025c09..9740f57 100644
>> > --- a/hw/virtio-pci.c
>> > +++ b/hw/virtio-pci.c
>> > @@ -695,7 +695,8 @@ static PCIDeviceInfo virtio_info[] = {
>> >              DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 3),
>> >              DEFINE_VIRTIO_NET_FEATURES(VirtIOPCIProxy, host_features),
>> >              DEFINE_NIC_PROPERTIES(VirtIOPCIProxy, nic),
>> > -            DEFINE_PROP_UINT32("txtimer", VirtIOPCIProxy, txtimer, 1),
>> > +            DEFINE_PROP_UINT32("txtimer", VirtIOPCIProxy, txtimer,
>> > +                               TXTIMER_DEFAULT),
>> >              DEFINE_PROP_INT32("txburst", VirtIOPCIProxy, txburst, 256),
>> >              DEFINE_PROP_END_OF_LIST(),
>> >          },
>> > diff --git a/hw/virtio.h b/hw/virtio.h
>> > index 4051889..a1a17a2 100644
>> > --- a/hw/virtio.h
>> > +++ b/hw/virtio.h
>> > @@ -183,6 +183,12 @@ void virtio_update_irq(VirtIODevice *vdev);
>> >  void virtio_bind_device(VirtIODevice *vdev, const VirtIOBindings *binding,
>> >                          void *opaque);
>> >
>> > +#ifdef CONFIG_IOTHREAD
>> > + #define TXTIMER_DEFAULT 0
>> > +#else
>> > + #define TXTIMER_DEFAULT 1
>> > +#endif
>> > +
>>
>> Add a comment explaning that this is just a performance optimization?
>>
>> >  /* Base devices.  */
>> >  VirtIODevice *virtio_blk_init(DeviceState *dev, BlockConf *conf);
>> >  VirtIODevice *virtio_net_init(DeviceState *dev, NICConf *conf,
>> >
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe kvm" in
>> > the body of a message to majordomo@xxxxxxxxxxxxxxx
>> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux