Hi, I've got a problem where I cannot start any new VMs with KVM if the host machine is under high CPU load. The problem is not 100% reproducible (it works sometimes), but under load conditions, it happens most of the time - roughly 95%. I'm usually using libvirt to start and stop KVM VMs. When using virsh to start a new VM under those conditions, the output looks like this: virsh # start testserver-a error: Failed to start domain testserver-a error: monitor socket did not show up.: Connection refused (There is a very long wait after the command has been sent until the error message shows up.) This is (an example of) the command line that libvirtd uses to start up qemu: ----- snip ----- LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin HOME=/root USER=root LOGNAME=root QEMU_AUDIO_DRV=none /usr/bin/qemu-kvm -S -M pc-0.12 -enable-kvm -m 256 -smp 1,sockets=1,cores=1,threads=1 -name testserver-a -uuid 7cbb3665-4d58-86b8- ce8f-20541995a99c -nodefaults -chardev socket,id=monitor,path=/usr/local/var/lib/libvirt/qemu/testserver- a.monitor,server,nowait -mon chardev=monitor,mode=readline -rtc base=utc -no- acpi -boot c -device lsi,id=scsi0,bus=pci.0,addr=0x7 -drive file=/data/testserver-a-system.img,if=none,id=drive-scsi0-0-1,boot=on -device scsi-disk,bus=scsi0.0,scsi-id=1,drive=drive-scsi0-0-1,id=scsi0-0-1 -drive file=/data/testserver-a-data1.img,if=none,id=drive-virtio-disk1 -device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk1,id=virtio-disk1 - drive file=/data/testserver-a-data2.img,if=none,id=drive-virtio-disk2 -device virtio-blk-pci,bus=pci.0,addr=0x5,drive=drive-virtio-disk2,id=virtio-disk2 - drive file=/data/gentoo-install-amd64- minimal-20100408.iso,if=none,media=cdrom,id=drive-ide0-0-0,readonly=on -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive file=/data/testserver-a_configfloppy.img,if=none,id=drive-fdc0-0-0 -global isa-fdc.driveA=drive-fdc0-0-0 -device e1000,vlan=0,id=net0,mac=52:54:00:84:6d:69,bus=pci.0,addr=0x6 -net tap,fd=24,vlan=0,name=hostnet0 -usb -vnc 127.0.0.1:1,password -k de -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 ----- snip ----- Copy-pasting this to a commandline on the host to start qemu manually leads to a non-functional qemu process that "just sits there" with nothing happening. The monitor socket /usr/local/var/lib/libvirt/qemu/testserver-a.monitor will, indeed, not show up. I've tried starting qemu with the same commandline but without the parameters for redirecting the monitor to a socket, without the fd parameter for the network interface and without the vnc parameter. This resulted in a black window with the title "QEMU (testserver-a) [Stopped]". I could not access the monitor console in graphical mode either. Some experimentation I've done suggests that this problem only happens if the high cpu load is caused by another KVM process, not if it is caused by something else running on the machine. The host machine I'm running this on has got 16 cores in total. It looks like it is sufficient for this bug to surface if at least one of these cores is brought to near 100% use by a KVM process. The version of qemu I'm using is qemu-kvm 0.12.4, built from source. Libvirt is version 0.8.1, built from source as well. The host OS is Fedora 12. The Kernel version is 2.6.32.12-115.fc12.x86_64. Does anybody have any idea what might be causing this and what might be done against it? Regards, Guido -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
