Some systems report INTx as not routed by setting pdev->irq to
IRQ_NOTCONNECTED, resulting in a -ENOTCONN error when trying to
setup eventfd signaling. Include this in the set of conditions
for which the PIN register is virtualized to zero.
Additionally consolidate vfio_pci_get_irq_count() to use this
virtualized value in reporting INTx support via ioctl and sanity
checking ioctl paths since pdev->irq is re-used when the device
is in MSI mode.
The combination of these results in both the config space of the
device and the ioctl interface behaving as if the device does not
support INTx.
Signed-off-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
---
Testing is welcome on systems that actually implement this form
of reporting an unrouted INTx, I don't have access to such as
system and have only tested mimicking the behavior with a quirk
to write the LINE register to 0xff and hack to mask the GSI info
for a device.
drivers/vfio/pci/vfio_pci_config.c | 3 ++-
drivers/vfio/pci/vfio_pci_core.c | 10 +---------
drivers/vfio/pci/vfio_pci_intrs.c | 2 +-
3 files changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
index 94142581c98c..14437396d721 100644
--- a/drivers/vfio/pci/vfio_pci_config.c
+++ b/drivers/vfio/pci/vfio_pci_config.c
@@ -1814,7 +1814,8 @@ int vfio_config_init(struct vfio_pci_core_device *vdev)
cpu_to_le16(PCI_COMMAND_MEMORY);
}
- if (!IS_ENABLED(CONFIG_VFIO_PCI_INTX) || vdev->nointx)
+ if (!IS_ENABLED(CONFIG_VFIO_PCI_INTX) || vdev->nointx ||
+ vdev->pdev->irq == IRQ_NOTCONNECTED)
vconfig[PCI_INTERRUPT_PIN] = 0;
ret = vfio_cap_init(vdev);
diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
index 586e49efb81b..c857630f447b 100644
--- a/drivers/vfio/pci/vfio_pci_core.c
+++ b/drivers/vfio/pci/vfio_pci_core.c
@@ -727,15 +727,7 @@ EXPORT_SYMBOL_GPL(vfio_pci_core_finish_enable);
static int vfio_pci_get_irq_count(struct vfio_pci_core_device *vdev, int irq_type)
{
if (irq_type == VFIO_PCI_INTX_IRQ_INDEX) {
- u8 pin;
-
- if (!IS_ENABLED(CONFIG_VFIO_PCI_INTX) ||
- vdev->nointx || vdev->pdev->is_virtfn)
- return 0;
-
- pci_read_config_byte(vdev->pdev, PCI_INTERRUPT_PIN, &pin);
-
- return pin ? 1 : 0;
+ return vdev->vconfig[PCI_INTERRUPT_PIN] ? 1 : 0;
} else if (irq_type == VFIO_PCI_MSI_IRQ_INDEX) {
u8 pos;
u16 flags;
diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
index 8382c5834335..565966351dfa 100644
--- a/drivers/vfio/pci/vfio_pci_intrs.c
+++ b/drivers/vfio/pci/vfio_pci_intrs.c
@@ -259,7 +259,7 @@ static int vfio_intx_enable(struct vfio_pci_core_device *vdev,
if (!is_irq_none(vdev))
return -EINVAL;
- if (!pdev->irq)
+ if (!pdev->irq || pdev->irq == IRQ_NOTCONNECTED)
return -ENODEV;
name = kasprintf(GFP_KERNEL_ACCOUNT, "vfio-intx(%s)", pci_name(pdev));
--
2.48.1
