PASID usage requires PASID support in both device and IOMMU. Since the
iommu drivers always enable the PASID capability for the device if it
is supported, so it is reasonable to extend the IOMMU_GET_HW_INFO to
report the PASID capability to userspace. Also, enhance the selftest
accordingly.
Reviewed-by: Kevin Tian <kevin.tian@xxxxxxxxx>
Reviewed-by: Jason Gunthorpe <jgg@xxxxxxxxxx>
Tested-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx> #aarch64 platform
Signed-off-by: Yi Liu <yi.l.liu@xxxxxxxxx>
---
drivers/iommu/iommufd/device.c | 33 ++++++++++++++++++++++++++++++++-
drivers/pci/ats.c | 33 +++++++++++++++++++++++++++++++++
include/linux/pci-ats.h | 3 +++
include/uapi/linux/iommufd.h | 14 +++++++++++++-
4 files changed, 81 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/iommufd/device.c b/drivers/iommu/iommufd/device.c
index 768eae6c3275..4d012e4e2e81 100644
--- a/drivers/iommu/iommufd/device.c
+++ b/drivers/iommu/iommufd/device.c
@@ -3,6 +3,8 @@
*/
#include <linux/iommu.h>
#include <linux/iommufd.h>
+#include <linux/pci.h>
+#include <linux/pci-ats.h>
#include <linux/slab.h>
#include <uapi/linux/iommufd.h>
@@ -1260,7 +1262,8 @@ int iommufd_get_hw_info(struct iommufd_ucmd *ucmd)
void *data;
int rc;
- if (cmd->flags || cmd->__reserved)
+ if (cmd->flags || cmd->__reserved[0] || cmd->__reserved[1] ||
+ cmd->__reserved[2])
return -EOPNOTSUPP;
idev = iommufd_get_device(ucmd, cmd->dev_id);
@@ -1317,6 +1320,34 @@ int iommufd_get_hw_info(struct iommufd_ucmd *ucmd)
if (device_iommu_capable(idev->dev, IOMMU_CAP_DIRTY_TRACKING))
cmd->out_capabilities |= IOMMU_HW_CAP_DIRTY_TRACKING;
+ /*
+ * Currently, major iommu drivers enable PASID in the probe_device()
+ * op if iommu and device supports it. So the max_pasids stored in
+ * dev->iommu indicates both PASID support and enable status. A
+ * non-zero dev->iommu->max_pasids means PASID is supported and
+ * enabled, The iommufd only reports PASID capability to userspace
+ * if it's enabled.
+ */
+ if (idev->dev->iommu->max_pasids) {
+ cmd->out_max_pasid_log2 = ilog2(idev->dev->iommu->max_pasids);
+
+ if (dev_is_pci(idev->dev)) {
+ struct pci_dev *pdev = to_pci_dev(idev->dev);
+ int ctrl;
+
+ ctrl = pci_pasid_ctrl_status(pdev);
+
+ WARN_ON_ONCE(!(ctrl & PCI_PASID_CTRL_ENABLE));
+
+ if (ctrl & PCI_PASID_CTRL_EXEC)
+ cmd->out_capabilities |=
+ IOMMU_HW_CAP_PCI_PASID_EXEC;
+ if (ctrl & PCI_PASID_CTRL_PRIV)
+ cmd->out_capabilities |=
+ IOMMU_HW_CAP_PCI_PASID_PRIV;
+ }
+ }
+
rc = iommufd_ucmd_respond(ucmd, sizeof(*cmd));
out_free:
kfree(data);
diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index 6afff1f1b143..c35465120329 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -538,4 +538,37 @@ int pci_max_pasids(struct pci_dev *pdev)
return (1 << FIELD_GET(PCI_PASID_CAP_WIDTH, supported));
}
EXPORT_SYMBOL_GPL(pci_max_pasids);
+
+/**
+ * pci_pasid_ctrl_status - Check the PASID status
+ * @pdev: PCI device structure
+ *
+ * Returns a negative value when no PASID capability is present.
+ * Otherwise the value of the control register is returned.
+ * Status reported are:
+ *
+ * PCI_PASID_CTRL_ENABLE - PASID enabled
+ * PCI_PASID_CTRL_EXEC - Execute permission enabled
+ * PCI_PASID_CTRL_PRIV - Privileged mode enabled
+ */
+int pci_pasid_ctrl_status(struct pci_dev *pdev)
+{
+ int pasid;
+ u16 ctrl;
+
+ if (pdev->is_virtfn)
+ pdev = pci_physfn(pdev);
+
+ pasid = pdev->pasid_cap;
+ if (!pasid)
+ return -EINVAL;
+
+ pci_read_config_word(pdev, pasid + PCI_PASID_CTRL, &ctrl);
+
+ ctrl &= PCI_PASID_CTRL_ENABLE | PCI_PASID_CTRL_EXEC |
+ PCI_PASID_CTRL_PRIV;
+
+ return ctrl;
+}
+EXPORT_SYMBOL_GPL(pci_pasid_ctrl_status);
#endif /* CONFIG_PCI_PASID */
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
index 0e8b74e63767..f4e1d2010287 100644
--- a/include/linux/pci-ats.h
+++ b/include/linux/pci-ats.h
@@ -42,6 +42,7 @@ int pci_enable_pasid(struct pci_dev *pdev, int features);
void pci_disable_pasid(struct pci_dev *pdev);
int pci_pasid_features(struct pci_dev *pdev);
int pci_max_pasids(struct pci_dev *pdev);
+int pci_pasid_ctrl_status(struct pci_dev *pdev);
#else /* CONFIG_PCI_PASID */
static inline int pci_enable_pasid(struct pci_dev *pdev, int features)
{ return -EINVAL; }
@@ -50,6 +51,8 @@ static inline int pci_pasid_features(struct pci_dev *pdev)
{ return -EINVAL; }
static inline int pci_max_pasids(struct pci_dev *pdev)
{ return -EINVAL; }
+static inline int pci_pasid_ctrl_status(struct pci_dev *pdev)
+{ return -EINVAL; }
#endif /* CONFIG_PCI_PASID */
#endif /* LINUX_PCI_ATS_H */
diff --git a/include/uapi/linux/iommufd.h b/include/uapi/linux/iommufd.h
index 34810f6ae2b5..0e27557fb86b 100644
--- a/include/uapi/linux/iommufd.h
+++ b/include/uapi/linux/iommufd.h
@@ -608,9 +608,17 @@ enum iommu_hw_info_type {
* IOMMU_HWPT_GET_DIRTY_BITMAP
* IOMMU_HWPT_SET_DIRTY_TRACKING
*
+ * @IOMMU_HW_CAP_PASID_EXEC: Execute Permission Supported, user ignores it
+ * when the struct iommu_hw_info::out_max_pasid_log2
+ * is zero.
+ * @IOMMU_HW_CAP_PASID_PRIV: Privileged Mode Supported, user ignores it
+ * when the struct iommu_hw_info::out_max_pasid_log2
+ * is zero.
*/
enum iommufd_hw_capabilities {
IOMMU_HW_CAP_DIRTY_TRACKING = 1 << 0,
+ IOMMU_HW_CAP_PCI_PASID_EXEC = 1 << 1,
+ IOMMU_HW_CAP_PCI_PASID_PRIV = 1 << 2,
};
/**
@@ -626,6 +634,9 @@ enum iommufd_hw_capabilities {
* iommu_hw_info_type.
* @out_capabilities: Output the generic iommu capability info type as defined
* in the enum iommu_hw_capabilities.
+ * @out_max_pasid_log2: Output the width of PASIDs. 0 means no PASID support.
+ * PCI devices turn to out_capabilities to check if the
+ * specific capabilities is supported or not.
* @__reserved: Must be 0
*
* Query an iommu type specific hardware information data from an iommu behind
@@ -649,7 +660,8 @@ struct iommu_hw_info {
__u32 data_len;
__aligned_u64 data_uptr;
__u32 out_data_type;
- __u32 __reserved;
+ __u8 out_max_pasid_log2;
+ __u8 __reserved[3];
__aligned_u64 out_capabilities;
};
#define IOMMU_GET_HW_INFO _IO(IOMMUFD_TYPE, IOMMUFD_CMD_GET_HW_INFO)
--
2.34.1
