Re: [PATCH 5/7] KVM: x86: Implement KVM_HYPERV_SET_TLB_FLUSH_INHIBIT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10.10.24 10:57, Vitaly Kuznetsov wrote:
> Nikolas Wipper <nikwip@xxxxxxxxx> writes:
>> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
>> index 7571ac578884..ab3a9beb61a2 100644
>> --- a/arch/x86/include/asm/kvm_host.h
>> +++ b/arch/x86/include/asm/kvm_host.h
>> @@ -698,6 +698,8 @@ struct kvm_vcpu_hv {
>>
>>  	bool suspended;
>>  	int waiting_on;
>> +
>> +	int tlb_flush_inhibit;
>
> This is basically boolean, right? And we only make it 'int' to be able
> to store 'u8' from the ioctl? This doesn't look very clean. Do you
> envision anything but '1'/'0' in 'inhibit'? If not, maybe we can just
> make it a flag (and e.g. extend 'flags' to be u32/u64)? This way we can
> convert 'tlb_flush_inhibit' to a normal bool.
>

Yes, inhibit would always be binary, so incorporating it into the flags
sounds reasonable. Even with the current API, this could just be a bool
(tlb_flush_inhibit = inhibit == 1;)

>>  };
>>
>>  struct kvm_hypervisor_cpuid {
>> diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
>> index e68fbc0c7fc1..40ea8340838f 100644
>> --- a/arch/x86/kvm/hyperv.c
>> +++ b/arch/x86/kvm/hyperv.c
>> @@ -2137,6 +2137,9 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
>>  		bitmap_zero(vcpu_mask, KVM_MAX_VCPUS);
>>
>>  		kvm_for_each_vcpu(i, v, kvm) {
>> +			if (READ_ONCE(v->arch.hyperv->tlb_flush_inhibit))
>> +				goto ret_suspend;
>> +
>>  			__set_bit(i, vcpu_mask);
>>  		}
>>  	} else if (!is_guest_mode(vcpu)) {
>> @@ -2148,6 +2151,9 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
>>  				__clear_bit(i, vcpu_mask);
>>  				continue;
>>  			}
>> +
>> +			if (READ_ONCE(v->arch.hyperv->tlb_flush_inhibit))
>> +				goto ret_suspend;
>>  		}
>>  	} else {
>>  		struct kvm_vcpu_hv *hv_v;
>> @@ -2175,6 +2181,9 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
>>  						    sparse_banks))
>>  				continue;
>>
>> +			if (READ_ONCE(v->arch.hyperv->tlb_flush_inhibit))
>> +				goto ret_suspend;
>> +
>
> These READ_ONCEs make me think I misunderstand something here, please
> bear with me :-).
>
> Like we're trying to protect against 'tlb_flush_inhibit' being read
> somewhere in the beginning of the function and want to generate real
> memory accesses. But what happens if tlb_flush_inhibit changes right
> _after_ we checked it here and _before_ we actuall do
> kvm_make_vcpus_request_mask()? Wouldn't it be a problem? In case it
> would, I think we need to reverse the order: do
> kvm_make_vcpus_request_mask() anyway and after it go through vcpu_mask
> checking whether any of the affected vCPUs has 'tlb_flush_inhibit' and
> if it does, suspend the caller.
>

The case you're describing is prevented through SRCU synchronisation in
the ioctl. The hypercall actually holds a read side critical section
during the whole of its execution, so when tlb_flush_inhibit changes
after we read it, the ioctl would wait for the flushes to complete:

vCPU 0                   | vCPU 1
-------------------------+------------------------
                         | hypercall enter
                         | srcu_read_lock()
ioctl enter              |
                         | tlb_flush_inhibit read
tlb_flush_inhibit write  |
synchronize_srcu() start |
                         | TLB flush reqs send
                         | srcu_read_unlock()
synchronize_srcu() end   |
ioctl exit               |

>>  			__set_bit(i, vcpu_mask);
>>  		}
>>  	}
>> @@ -2193,6 +2202,9 @@ static u64 kvm_hv_flush_tlb(struct kvm_vcpu *vcpu, struct kvm_hv_hcall *hc)
>>  	/* We always do full TLB flush, set 'Reps completed' = 'Rep Count' */
>>  	return (u64)HV_STATUS_SUCCESS |
>>  		((u64)hc->rep_cnt << HV_HYPERCALL_REP_COMP_OFFSET);
>> +ret_suspend:
>> +	kvm_hv_vcpu_suspend_tlb_flush(vcpu, v->vcpu_id);
>> +	return -EBUSY;
>>  }
>>
>>  static void kvm_hv_send_ipi_to_many(struct kvm *kvm, u32 vector,
>> @@ -2380,6 +2392,13 @@ static int kvm_hv_hypercall_complete(struct kvm_vcpu *vcpu, u64 result)
>>  	u32 tlb_lock_count = 0;
>>  	int ret;
>>
>> +	/*
>> +	 * Reached when the hyper-call resulted in a suspension of the vCPU.
>> +	 * The instruction will be re-tried once the vCPU is unsuspended.
>> +	 */
>> +	if (kvm_hv_vcpu_suspended(vcpu))
>> +		return 1;
>> +
>>  	if (hv_result_success(result) && is_guest_mode(vcpu) &&
>>  	    kvm_hv_is_tlb_flush_hcall(vcpu) &&
>>  	    kvm_read_guest(vcpu->kvm, to_hv_vcpu(vcpu)->nested.pa_page_gpa,
>> @@ -2919,6 +2938,9 @@ int kvm_get_hv_cpuid(struct kvm_vcpu *vcpu, struct kvm_cpuid2 *cpuid,
>>
>>  void kvm_hv_vcpu_suspend_tlb_flush(struct kvm_vcpu *vcpu, int vcpu_id)
>>  {
>> +	RCU_LOCKDEP_WARN(!srcu_read_lock_held(&vcpu->kvm->srcu),
>> +			 "Suspicious Hyper-V TLB flush inhibit usage\n");
>> +
>>  	/* waiting_on's store should happen before suspended's */
>>  	WRITE_ONCE(vcpu->arch.hyperv->waiting_on, vcpu_id);
>>  	WRITE_ONCE(vcpu->arch.hyperv->suspended, true);
>> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
>> index 18d0a300e79a..1f925e32a927 100644
>> --- a/arch/x86/kvm/x86.c
>> +++ b/arch/x86/kvm/x86.c
>> @@ -4642,6 +4642,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
>>  	case KVM_CAP_HYPERV_CPUID:
>>  	case KVM_CAP_HYPERV_ENFORCE_CPUID:
>>  	case KVM_CAP_SYS_HYPERV_CPUID:
>> +	case KVM_CAP_HYPERV_TLB_FLUSH_INHIBIT:
>>  #endif
>>  	case KVM_CAP_PCI_SEGMENT:
>>  	case KVM_CAP_DEBUGREGS:
>> @@ -5853,6 +5854,31 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu,
>>  	}
>>  }
>>
>> +static int kvm_vcpu_ioctl_set_tlb_flush_inhibit(struct kvm_vcpu *vcpu,
>> +						struct kvm_hyperv_tlb_flush_inhibit *set)
>> +{
>> +	if (set->inhibit == READ_ONCE(vcpu->arch.hyperv->tlb_flush_inhibit))
>> +		return 0;
>> +
>> +	WRITE_ONCE(vcpu->arch.hyperv->tlb_flush_inhibit, set->inhibit);
>
> As you say before, vCPU ioctls are serialized and noone else sets
> tlb_flush_inhibit, do I understand correctly that
> READ_ONCE()/WRITE_ONCE() are redundant here?
>

As mentioned before, since tlb_flush_inhibit is shared it needs
these calls.

Nikolas





[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux