Hi, Based on the review notes Blue Swirl sent us after my last mail, Yehuda cleaned up the header files. The patch is much smaller now and I hope that you accept it for inclusion. To build it, you will need the testing (or unstable) git head of ceph now. The required header files will be part of the next release of ceph (0.20.3). In case you didn't read my last posting, here is the short description again: This patch is a block driver for the distributed file system Ceph (http://ceph.newdream.net/). Ceph was included in the Linux v2.6.34 kernel. However, this driver uses librados (which is part of the Ceph server) for direct access to the Ceph object store and is running entirely in userspace. Therefore it is called "rbd" - rados block device. The basic idea is to stripe a VM block device over (by default) 4MB objects stored in the Ceph distributed object store. This is very similar to what the sheepdog project is doing, but uses the ceph server as a storage backend. If you don't plan on using the entire ceph filesystem you may leave out the metadata service of ceph. Yehuda Sadeh helped me with the implementation and put some additional usage information on the Ceph-Wiki (http://ceph.newdream.net/wiki/Kvm-rbd). He has also written a Linux kernel driver to make an rbd image accessible as a block device. Regards, Christian --- Makefile | 3 + Makefile.objs | 1 + block/rbd.c | 584 +++++++++++++++++++++++++++++++++++++++++++++++++++++ block/rbd_types.h | 52 +++++ configure | 27 +++ 5 files changed, 667 insertions(+), 0 deletions(-) create mode 100644 block/rbd.c create mode 100644 block/rbd_types.h -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
