Re: [RFC PATCH vhost] vhost-vdpa: Fix invalid irq bypass unregister

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 2, 2024 at 2:51 PM Dragos Tatulea <dtatulea@xxxxxxxxxx> wrote:
>
> On Fri, 2024-08-02 at 11:29 +0800, Jason Wang wrote:
> > On Thu, Aug 1, 2024 at 11:38 PM Dragos Tatulea <dtatulea@xxxxxxxxxx> wrote:
> > >
> > > The following workflow triggers the crash referenced below:
> > >
> > > 1) vhost_vdpa_unsetup_vq_irq() unregisters the irq bypass producer
> > >    but the producer->token is still valid.
> > > 2) vq context gets released and reassigned to another vq.
> >
> > Just to make sure I understand here, which structure is referred to as
> > "vq context" here? I guess it's not call_ctx as it is a part of the vq
> > itself.
> >
> > > 3) That other vq registers it's producer with the same vq context
> > >    pointer as token in vhost_vdpa_setup_vq_irq().
> >
> > Or did you mean when a single eventfd is shared among different vqs?
> >
> Yes, that's what I mean: vq->call_ctx.ctx which is a eventfd_ctx.
>
> But I don't think it's shared in this case, only that the old eventfd_ctx value
> is lingering in producer->token. And this old eventfd_ctx is assigned now to
> another vq.

Just to make sure I understand the issue. The eventfd_ctx should be
still valid until a new VHOST_SET_VRING_CALL().

I may miss something but the only way to assign exactly the same
eventfd_ctx value to another vq is where the guest tries to share the
MSI-X vector among virtqueues, then qemu will use a single eventfd as
the callback for multiple virtqueues. If this is true:

For bypass registering, only the first registering can succeed as the
following registering will fail because the irq bypass manager already
had exactly the same producer token.
For registering, all unregistering can succeed:

1) the first unregistering will do the real job that unregister the token
2) the following unregistering will do nothing by iterating the
producer token list without finding a match one

Maybe you can show me the userspace behaviour (ioctls) when you see this?

Thanks

>
> > > 4) The original vq tries to unregister it's producer which it has
> > >    already unlinked in step 1. irq_bypass_unregister_producer() will go
> > >    ahead and unlink the producer once again. That happens because:
> > >       a) The producer has a token.
> > >       b) An element with that token is found. But that element comes
> > >          from step 3.
> > >
> > > I see 3 ways to fix this:
> > > 1) Fix the vhost-vdpa part. What this patch does. vfio has a different
> > >    workflow.
> > > 2) Set the token to NULL directly in irq_bypass_unregister_producer()
> > >    after unlinking the producer. But that makes the API asymmetrical.
> > > 3) Make irq_bypass_unregister_producer() also compare the pointer
> > >    elements not just the tokens and do the unlink only on match.
> > >
> > > Any thoughts?
> > >
> > > Oops: general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] SMP
> > > CPU: 8 PID: 5190 Comm: qemu-system-x86 Not tainted 6.10.0-rc7+ #6
> > > Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
> > > RIP: 0010:irq_bypass_unregister_producer+0xa5/0xd0
> > > RSP: 0018:ffffc900034d7e50 EFLAGS: 00010246
> > > RAX: dead000000000122 RBX: ffff888353d12718 RCX: ffff88810336a000
> > > RDX: dead000000000100 RSI: ffffffff829243a0 RDI: 0000000000000000
> > > RBP: ffff888353c42000 R08: ffff888104882738 R09: ffff88810336a000
> > > R10: ffff888448ab2050 R11: 0000000000000000 R12: ffff888353d126a0
> > > R13: 0000000000000004 R14: 0000000000000055 R15: 0000000000000004
> > > FS:  00007f9df9403c80(0000) GS:ffff88852cc00000(0000) knlGS:0000000000000000
> > > CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > CR2: 0000562dffc6b568 CR3: 000000012efbb006 CR4: 0000000000772ef0
> > > PKRU: 55555554
> > > Call Trace:
> > >  <TASK>
> > >  ? die_addr+0x36/0x90
> > >  ? exc_general_protection+0x1a8/0x390
> > >  ? asm_exc_general_protection+0x26/0x30
> > >  ? irq_bypass_unregister_producer+0xa5/0xd0
> > >  vhost_vdpa_setup_vq_irq+0x5a/0xc0 [vhost_vdpa]
> > >  vhost_vdpa_unlocked_ioctl+0xdcd/0xe00 [vhost_vdpa]
> > >  ? vhost_vdpa_config_cb+0x30/0x30 [vhost_vdpa]
> > >  __x64_sys_ioctl+0x90/0xc0
> > >  do_syscall_64+0x4f/0x110
> > >  entry_SYSCALL_64_after_hwframe+0x4b/0x53
> > > RIP: 0033:0x7f9df930774f
> > > RSP: 002b:00007ffc55013080 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
> > > RAX: ffffffffffffffda RBX: 0000562dfe134d20 RCX: 00007f9df930774f
> > > RDX: 00007ffc55013200 RSI: 000000004008af21 RDI: 0000000000000011
> > > RBP: 00007ffc55013200 R08: 0000000000000002 R09: 0000000000000000
> > > R10: 0000000000000000 R11: 0000000000000246 R12: 0000562dfe134360
> > > R13: 0000562dfe134d20 R14: 0000000000000000 R15: 00007f9df801e190
> > >
> > > Signed-off-by: Dragos Tatulea <dtatulea@xxxxxxxxxx>
> > > ---
> > >  drivers/vhost/vdpa.c | 1 +
> > >  1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c
> > > index 478cd46a49ed..d4a7a3918d86 100644
> > > --- a/drivers/vhost/vdpa.c
> > > +++ b/drivers/vhost/vdpa.c
> > > @@ -226,6 +226,7 @@ static void vhost_vdpa_unsetup_vq_irq(struct vhost_vdpa *v, u16 qid)
> > >         struct vhost_virtqueue *vq = &v->vqs[qid];
> > >
> > >         irq_bypass_unregister_producer(&vq->call_ctx.producer);
> > > +       vq->call_ctx.producer.token = NULL;
> > >  }
> > >
> > >  static int _compat_vdpa_reset(struct vhost_vdpa *v)
> > > --
> > > 2.45.2
> > >
> >
> Thanks
>






[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux