Re: [PATCH v5 2/4] dt-bindings: riscv: Add Svade and Svadu Entries

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 5, 2024 at 10:25 PM Conor Dooley <conor@xxxxxxxxxx> wrote:
>
> On Wed, Jun 05, 2024 at 08:15:08PM +0800, Yong-Xuan Wang wrote:
> > Add entries for the Svade and Svadu extensions to the riscv,isa-extensions
> > property.
> >
> > Signed-off-by: Yong-Xuan Wang <yongxuan.wang@xxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/riscv/extensions.yaml | 30 +++++++++++++++++++
> >  1 file changed, 30 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml
> > index 468c646247aa..1e30988826b9 100644
> > --- a/Documentation/devicetree/bindings/riscv/extensions.yaml
> > +++ b/Documentation/devicetree/bindings/riscv/extensions.yaml
> > @@ -153,6 +153,36 @@ properties:
> >              ratified at commit 3f9ed34 ("Add ability to manually trigger
> >              workflow. (#2)") of riscv-time-compare.
> >
> > +        - const: svade
> > +          description: |
> > +            The standard Svade supervisor-level extension for raising page-fault
> > +            exceptions when PTE A/D bits need be set as ratified in the 20240213
> > +            version of the privileged ISA specification.
> > +
> > +            Both Svade and Svadu extensions control the hardware behavior when
> > +            the PTE A/D bits need to be set. The default behavior for the four
> > +            possible combinations of these extensions in the device tree are:
> > +            1. Neither svade nor svadu in DT: default to svade.
>
> I think this needs to be expanded on, as to why nothing means svade.

Actually if both Svade and Svadu are not present in DT then
it is left to the platform and OpenSBI does nothing.

>
> > +            2. Only svade in DT: use svade.
>
> That's a statement of the obvious, right?
>
> > +            3. Only svadu in DT: use svadu.
>
> This is not relevant for Svade.
>
> > +            4. Both svade and svadu in DT: default to svade (Linux can switch to
> > +               svadu once the SBI FWFT extension is available).
>
> "The privilege level to which this devicetree has been provided can switch to
> Svadu if the SBI FWFT extension is available".
>
> > +        - const: svadu
> > +          description: |
> > +            The standard Svadu supervisor-level extension for hardware updating
> > +            of PTE A/D bits as ratified at commit c1abccf ("Merge pull request
> > +            #25 from ved-rivos/ratified") of riscv-svadu.
> > +
> > +            Both Svade and Svadu extensions control the hardware behavior when
> > +            the PTE A/D bits need to be set. The default behavior for the four
> > +            possible combinations of these extensions in the device tree are:
>
> @Anup/Drew/Alex, are we missing some wording in here about it only being
> valid to have Svadu in isolation if the provider of the devicetree has
> actually turned on Svadu? The binding says "the default behaviour", but
> it is not the "default" behaviour, the behaviour is a must AFAICT. If
> you set Svadu in isolation, you /must/ have turned it on. If you set
> Svadu and Svade, you must have Svadu turned off?

Yes, the wording should be more of requirement style using
must or may.

How about this ?
1) Both Svade and Svadu not present in DT => Supervisor may
    assume Svade to be present and enabled or it can discover
    based on mvendorid, marchid, and mimpid.
2) Only Svade present in DT => Supervisor must assume Svade
    to be always enabled. (Obvious)
3) Only Svadu present in DT => Supervisor must assume Svadu
    to be always enabled. (Obvious)
4) Both Svade and Svadu present in DT => Supervisor must
    assume Svadu turned-off at boot time. To use Svadu, supervisor
    must explicitly enable it using the SBI FWFT extension.

IMO, the #2 and #3 are definitely obvious but still worth mentioning.

>
> > +            1. Neither svade nor svadu in DT: default to svade.
> > +            2. Only svade in DT: use svade.
>
> These two are not relevant to Svadu, I'd leave them out.
>
> > +            3. Only svadu in DT: use svadu.
>
> Again, statement of the obvious?
>
> > +            4. Both svade and svadu in DT: default to svade (Linux can switch to
> > +               svadu once the SBI FWFT extension is available).
>
> Same here as in the Svade entry.
>
> Thanks,
> Conor.
>

Regards,
Anup





[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux