On Tue, May 7, 2024 at 9:19 PM Mi, Dapeng <dapeng1.mi@xxxxxxxxxxxxxxx> wrote:
>
>
> On 5/6/2024 1:29 PM, Mingwei Zhang wrote:
> > From: Sandipan Das <sandipan.das@xxxxxxx>
> >
> > Currently, the global control bits for a vcpu are restored to the reset
> > state only if the guest PMU version is less than 2. This works for
> > emulated PMU as the MSRs are intercepted and backing events are created
> > for and managed by the host PMU [1].
> >
> > If such a guest in run with passthrough PMU, the counters no longer work
> > because the global enable bits are cleared. Hence, set the global enable
> > bits to their reset state if passthrough PMU is used.
> >
> > A passthrough-capable host may not necessarily support PMU version 2 and
> > it can choose to restore or save the global control state from struct
> > kvm_pmu in the PMU context save and restore helpers depending on the
> > availability of the global control register.
> >
> > [1] 7b46b733bdb4 ("KVM: x86/pmu: Set enable bits for GP counters in PERF_GLOBAL_CTRL at "RESET"");
> > Reported-by: Mingwei Zhang <mizhang@xxxxxxxxxx>
> > Signed-off-by: Sandipan Das <sandipan.das@xxxxxxx>
> > [removed the fixes tag]
> > ---
> > arch/x86/kvm/pmu.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
> > index 5768ea2935e9..e656f72fdace 100644
> > --- a/arch/x86/kvm/pmu.c
> > +++ b/arch/x86/kvm/pmu.c
> > @@ -787,7 +787,7 @@ void kvm_pmu_refresh(struct kvm_vcpu *vcpu)
> > * in the global controls). Emulate that behavior when refreshing the
> > * PMU so that userspace doesn't need to manually set PERF_GLOBAL_CTRL.
> > */
> > - if (kvm_pmu_has_perf_global_ctrl(pmu) && pmu->nr_arch_gp_counters)
> > + if ((pmu->passthrough || kvm_pmu_has_perf_global_ctrl(pmu)) && pmu->nr_arch_gp_counters)
>
> The logic seems not correct. we could support perfmon version 1 for
> meidated vPMU (passthrough vPMU) as well in the future. pmu->passthrough
> is ture doesn't guarantee GLOBAL_CTRL MSR always exists.
heh, the logic is correct here. However, I would say the code change
may not reflect that clearly.
The if condition combines the handling of global ctrl registers for
both the legacy vPMU and the mediated passthrough vPMU.
In legacy pmu, the logic should be this:
if (kvm_pmu_has_perf_global_ctrl(pmu) && pmu->nr_arch_gp_counters)
Because, since KVM emulates the MSR, if the global ctrl register does
not exist, then there is no point resetting it to any value. However,
if it does exist, there are non-zero number of GP counters, we should
reset it to some value (all enabling bits are set for GP counters)
according to SDM.
The logic for mediated passthrough PMU is different as follows:
if (pmu->passthrough && pmu->nr_arch_gp_counters)
Since mediated passthrough PMU requires PerfMon v4 in Intel (PerfMon
v2 in AMD), once it is enabled (pmu->passthrough = true), then global
ctrl _must_ exist phyiscally. Regardless of whether we expose it to
the guest VM, at reset time, we need to ensure enabling bits for GP
counters are set (behind the screen). This is critical for AMD, since
most of the guests are usually in (AMD) PerfMon v1 in which global
ctrl MSR is inaccessible, but does exist and is operating in HW.
Yes, if we eliminate that requirement (pmu->passthrough -> Perfmon v4
Intel / Perfmon v2 AMD), then this code will have to change. However,
that is currently not in our RFCv2.
Thanks.
-Mingwei
>
>
> > pmu->global_ctrl = GENMASK_ULL(pmu->nr_arch_gp_counters - 1, 0);
> > }
> >
