On Thu, 25 Apr 2024 21:23:19 +0800 Longfang Liu <liulongfang@xxxxxxxxxx> wrote: > According to the latest hardware register specification. The DMA > addresses of EQE and AEQE are not at the front of their respective > register groups, but start from the second. > So, previously fetching the value starting from the first register > would result in an incorrect address. > > Therefore, the register location from which the address is obtained > needs to be modified. How does this affect migration? Has it ever worked? Does this make the migration data incompatible? Fixes: ??? > Signed-off-by: Longfang Liu <liulongfang@xxxxxxxxxx> > --- > drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c | 8 ++++---- > drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h | 3 +++ > 2 files changed, 7 insertions(+), 4 deletions(-) > > diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c > index 45351be8e270..0c7e31076ff4 100644 > --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c > +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c > @@ -516,12 +516,12 @@ static int vf_qm_state_save(struct hisi_acc_vf_core_device *hisi_acc_vdev, > return -EINVAL; > > /* Every reg is 32 bit, the dma address is 64 bit. */ > - vf_data->eqe_dma = vf_data->qm_eqc_dw[1]; > + vf_data->eqe_dma = vf_data->qm_eqc_dw[QM_XQC_ADDR_HIGH]; > vf_data->eqe_dma <<= QM_XQC_ADDR_OFFSET; > - vf_data->eqe_dma |= vf_data->qm_eqc_dw[0]; > - vf_data->aeqe_dma = vf_data->qm_aeqc_dw[1]; > + vf_data->eqe_dma |= vf_data->qm_eqc_dw[QM_XQC_ADDR_LOW]; > + vf_data->aeqe_dma = vf_data->qm_aeqc_dw[QM_XQC_ADDR_HIGH]; > vf_data->aeqe_dma <<= QM_XQC_ADDR_OFFSET; > - vf_data->aeqe_dma |= vf_data->qm_aeqc_dw[0]; > + vf_data->aeqe_dma |= vf_data->qm_aeqc_dw[QM_XQC_ADDR_LOW]; > > /* Through SQC_BT/CQC_BT to get sqc and cqc address */ > ret = qm_get_sqc(vf_qm, &vf_data->sqc_dma); > diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h > index 5bab46602fad..f887ab98581c 100644 > --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h > +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h > @@ -38,6 +38,9 @@ > #define QM_REG_ADDR_OFFSET 0x0004 > > #define QM_XQC_ADDR_OFFSET 32U > +#define QM_XQC_ADDR_LOW 0x1 > +#define QM_XQC_ADDR_HIGH 0x2 > + > #define QM_VF_AEQ_INT_MASK 0x0004 > #define QM_VF_EQ_INT_MASK 0x000c > #define QM_IFC_INT_SOURCE_V 0x0020
