On 4/15/2024 2:06 PM, Mingwei Zhang wrote:
On Fri, Apr 12, 2024 at 9:25 PM Mi, Dapeng <dapeng1.mi@xxxxxxxxxxxxxxx> wrote:
On 4/13/2024 11:34 AM, Mingwei Zhang wrote:
On Sat, Apr 13, 2024, Mi, Dapeng wrote:
On 4/12/2024 5:44 AM, Sean Christopherson wrote:
On Fri, Jan 26, 2024, Xiong Zhang wrote:
From: Dapeng Mi <dapeng1.mi@xxxxxxxxxxxxxxx>
Implement the save/restore of PMU state for pasthrough PMU in Intel. In
passthrough mode, KVM owns exclusively the PMU HW when control flow goes to
the scope of passthrough PMU. Thus, KVM needs to save the host PMU state
and gains the full HW PMU ownership. On the contrary, host regains the
ownership of PMU HW from KVM when control flow leaves the scope of
passthrough PMU.
Implement PMU context switches for Intel CPUs and opptunistically use
rdpmcl() instead of rdmsrl() when reading counters since the former has
lower latency in Intel CPUs.
Co-developed-by: Mingwei Zhang <mizhang@xxxxxxxxxx>
Signed-off-by: Mingwei Zhang <mizhang@xxxxxxxxxx>
Signed-off-by: Dapeng Mi <dapeng1.mi@xxxxxxxxxxxxxxx>
---
arch/x86/kvm/vmx/pmu_intel.c | 73 ++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/arch/x86/kvm/vmx/pmu_intel.c b/arch/x86/kvm/vmx/pmu_intel.c
index 0d58fe7d243e..f79bebe7093d 100644
--- a/arch/x86/kvm/vmx/pmu_intel.c
+++ b/arch/x86/kvm/vmx/pmu_intel.c
@@ -823,10 +823,83 @@ void intel_passthrough_pmu_msrs(struct kvm_vcpu *vcpu)
static void intel_save_pmu_context(struct kvm_vcpu *vcpu)
I would prefer there be a "guest" in there somewhere, e.g. intel_save_guest_pmu_context().
Yeah. It looks clearer.
{
+ struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
+ struct kvm_pmc *pmc;
+ u32 i;
+
+ if (pmu->version != 2) {
+ pr_warn("only PerfMon v2 is supported for passthrough PMU");
+ return;
+ }
+
+ /* Global ctrl register is already saved at VM-exit. */
+ rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, pmu->global_status);
+ /* Clear hardware MSR_CORE_PERF_GLOBAL_STATUS MSR, if non-zero. */
+ if (pmu->global_status)
+ wrmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, pmu->global_status);
+
+ for (i = 0; i < pmu->nr_arch_gp_counters; i++) {
+ pmc = &pmu->gp_counters[i];
+ rdpmcl(i, pmc->counter);
+ rdmsrl(i + MSR_ARCH_PERFMON_EVENTSEL0, pmc->eventsel);
+ /*
+ * Clear hardware PERFMON_EVENTSELx and its counter to avoid
+ * leakage and also avoid this guest GP counter get accidentally
+ * enabled during host running when host enable global ctrl.
+ */
+ if (pmc->eventsel)
+ wrmsrl(MSR_ARCH_PERFMON_EVENTSEL0 + i, 0);
+ if (pmc->counter)
+ wrmsrl(MSR_IA32_PMC0 + i, 0);
This doesn't make much sense. The kernel already has full access to the guest,
I don't see what is gained by zeroing out the MSRs just to hide them from perf.
It's necessary to clear the EVENTSELx MSRs for both GP and fixed counters.
Considering this case, Guest uses GP counter 2, but Host doesn't use it. So
if the EVENTSEL2 MSR is not cleared here, the GP counter 2 would be enabled
unexpectedly on host later since Host perf always enable all validate bits
in PERF_GLOBAL_CTRL MSR. That would cause issues.
Yeah, the clearing for PMCx MSR should be unnecessary .
Why is clearing for PMCx MSR unnecessary? Do we want to leaking counter
values to the host? NO. Not in cloud usage.
No, this place is clearing the guest counter value instead of host
counter value. Host always has method to see guest value in a normal VM
if he want. I don't see its necessity, it's just a overkill and
introduce extra overhead to write MSRs.
I am curious how the perf subsystem solves the problem? Does perf
subsystem in the host only scrubbing the selector but not the counter
value when doing the context switch?
When context switch happens, perf code would schedule out the old events
and schedule in the new events. When scheduling out, the ENABLE bit of
EVENTSELx MSR would be cleared, and when scheduling in, the EVENTSELx
and PMCx MSRs would be overwritten with new event's attr.config and
sample_period separately. Of course, these is only for the case when
there are new events to be programmed on the PMC. If no new events, the
PMCx MSR would keep stall value and won't be cleared.
Anyway, I don't see any reason that PMCx MSR must be cleared.
Please make changes to this patch with **extreme** caution.
According to our past experience, if there is a bug somewhere,
there is a catch here (normally).
Thanks.
-Mingwei
Similarly, if perf enables a counter if PERF_GLOBAL_CTRL without first restoring
the event selector, we gots problems.
Same thing for the fixed counters below. Can't this just be?
for (i = 0; i < pmu->nr_arch_gp_counters; i++)
rdpmcl(i, pmu->gp_counters[i].counter);
for (i = 0; i < pmu->nr_arch_fixed_counters; i++)
rdpmcl(INTEL_PMC_FIXED_RDPMC_BASE | i,
pmu->fixed_counters[i].counter);
+ }
+
+ rdmsrl(MSR_CORE_PERF_FIXED_CTR_CTRL, pmu->fixed_ctr_ctrl);
+ /*
+ * Clear hardware FIXED_CTR_CTRL MSR to avoid information leakage and
+ * also avoid these guest fixed counters get accidentially enabled
+ * during host running when host enable global ctrl.
+ */
+ if (pmu->fixed_ctr_ctrl)
+ wrmsrl(MSR_CORE_PERF_FIXED_CTR_CTRL, 0);
+ for (i = 0; i < pmu->nr_arch_fixed_counters; i++) {
+ pmc = &pmu->fixed_counters[i];
+ rdpmcl(INTEL_PMC_FIXED_RDPMC_BASE | i, pmc->counter);
+ if (pmc->counter)
+ wrmsrl(MSR_CORE_PERF_FIXED_CTR0 + i, 0);
+ }
}
static void intel_restore_pmu_context(struct kvm_vcpu *vcpu)
{
+ struct kvm_pmu *pmu = vcpu_to_pmu(vcpu);
+ struct kvm_pmc *pmc;
+ u64 global_status;
+ int i;
+
+ if (pmu->version != 2) {
+ pr_warn("only PerfMon v2 is supported for passthrough PMU");
+ return;
+ }
+
+ /* Clear host global_ctrl and global_status MSR if non-zero. */
+ wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
Why? PERF_GLOBAL_CTRL will be auto-loaded at VM-Enter, why do it now?
As previous comments say, host perf always enable all counters in
PERF_GLOBAL_CTRL by default. The reason to clear PERF_GLOBAL_CTRL here is to
ensure all counters in disabled state and the later counter manipulation
(writing MSR) won't cause any race condition or unexpected behavior on HW.
+ rdmsrl(MSR_CORE_PERF_GLOBAL_STATUS, global_status);
+ if (global_status)
+ wrmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, global_status);
This seems especially silly, isn't the full MSR being written below? Or am I
misunderstanding how these things work?
I think Jim's comment has already explain why we need to do this.
+ wrmsrl(MSR_CORE_PERF_GLOBAL_STATUS_SET, pmu->global_status);
+
+ for (i = 0; i < pmu->nr_arch_gp_counters; i++) {
+ pmc = &pmu->gp_counters[i];
+ wrmsrl(MSR_IA32_PMC0 + i, pmc->counter);
+ wrmsrl(MSR_ARCH_PERFMON_EVENTSEL0 + i, pmc->eventsel);
+ }
+
+ wrmsrl(MSR_CORE_PERF_FIXED_CTR_CTRL, pmu->fixed_ctr_ctrl);
+ for (i = 0; i < pmu->nr_arch_fixed_counters; i++) {
+ pmc = &pmu->fixed_counters[i];
+ wrmsrl(MSR_CORE_PERF_FIXED_CTR0 + i, pmc->counter);
+ }
}
struct kvm_pmu_ops intel_pmu_ops __initdata = {
--
2.34.1
