Re: [PATCH v5 22/22] KVM: riscv: selftests: Add a test for counter overflow

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/5/24 06:23, Andrew Jones wrote:
On Wed, Apr 03, 2024 at 01:04:51AM -0700, Atish Patra wrote:
Add a test for verifying overflow interrupt. Currently, it relies on
overflow support on cycle/instret events. This test works for cycle/
instret events which support sampling via hpmcounters on the platform.
There are no ISA extensions to detect if a platform supports that. Thus,
this test will fail on platform with virtualization but doesn't
support overflow on these two events.

Maybe we should give the user a command line option to disable this test
in case the platform they're testing doesn't support it but they want to
run the rest of the tests without getting a FAIL.


Sure. I will add that option.


Reviewed-by: Anup Patel <anup@xxxxxxxxxxxxxx>
Signed-off-by: Atish Patra <atishp@xxxxxxxxxxxx>
---
  .../selftests/kvm/riscv/sbi_pmu_test.c        | 114 ++++++++++++++++++
  1 file changed, 114 insertions(+)

diff --git a/tools/testing/selftests/kvm/riscv/sbi_pmu_test.c b/tools/testing/selftests/kvm/riscv/sbi_pmu_test.c
index 7d195be5c3d9..451db956b885 100644
--- a/tools/testing/selftests/kvm/riscv/sbi_pmu_test.c
+++ b/tools/testing/selftests/kvm/riscv/sbi_pmu_test.c
@@ -14,6 +14,7 @@
  #include "test_util.h"
  #include "processor.h"
  #include "sbi.h"
+#include "arch_timer.h"
/* Maximum counters(firmware + hardware) */
  #define RISCV_MAX_PMU_COUNTERS 64
@@ -24,6 +25,9 @@ union sbi_pmu_ctr_info ctrinfo_arr[RISCV_MAX_PMU_COUNTERS];
  static void *snapshot_gva;
  static vm_paddr_t snapshot_gpa;
+static int vcpu_shared_irq_count;
+static int counter_in_use;
+
  /* Cache the available counters in a bitmask */
  static unsigned long counter_mask_available;
@@ -117,6 +121,31 @@ static void guest_illegal_exception_handler(struct ex_regs *regs)
  	regs->epc += 4;
  }
+static void guest_irq_handler(struct ex_regs *regs)
+{
+	unsigned int irq_num = regs->cause & ~CAUSE_IRQ_FLAG;
+	struct riscv_pmu_snapshot_data *snapshot_data = snapshot_gva;
+	unsigned long overflown_mask;
+	unsigned long counter_val = 0;
+
+	/* Validate that we are in the correct irq handler */
+	GUEST_ASSERT_EQ(irq_num, IRQ_PMU_OVF);
+
+	/* Stop all counters first to avoid further interrupts */
+	stop_counter(counter_in_use, SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT);
+
+	csr_clear(CSR_SIP, BIT(IRQ_PMU_OVF));
+
+	overflown_mask = READ_ONCE(snapshot_data->ctr_overflow_mask);
+	GUEST_ASSERT(overflown_mask & 0x01);
+
+	WRITE_ONCE(vcpu_shared_irq_count, vcpu_shared_irq_count+1);
+
+	counter_val = READ_ONCE(snapshot_data->ctr_values[0]);
+	/* Now start the counter to mimick the real driver behavior */
+	start_counter(counter_in_use, SBI_PMU_START_FLAG_SET_INIT_VALUE, counter_val);
+}
+
  static unsigned long get_counter_index(unsigned long cbase, unsigned long cmask,
  				       unsigned long cflags,
  				       unsigned long event)
@@ -276,6 +305,33 @@ static void test_pmu_event_snapshot(unsigned long event)
  	stop_reset_counter(counter, 0);
  }
+static void test_pmu_event_overflow(unsigned long event)
+{
+	unsigned long counter;
+	unsigned long counter_value_post;
+	unsigned long counter_init_value = ULONG_MAX - 10000;
+	struct riscv_pmu_snapshot_data *snapshot_data = snapshot_gva;
+
+	counter = get_counter_index(0, counter_mask_available, 0, event);
+	counter_in_use = counter;
+
+	/* The counter value is updated w.r.t relative index of cbase passed to start/stop */
+	WRITE_ONCE(snapshot_data->ctr_values[0], counter_init_value);
+	start_counter(counter, SBI_PMU_START_FLAG_INIT_SNAPSHOT, 0);
+	dummy_func_loop(10000);
+	udelay(msecs_to_usecs(2000));
+	/* irq handler should have stopped the counter */
+	stop_counter(counter, SBI_PMU_STOP_FLAG_TAKE_SNAPSHOT);
+
+	counter_value_post = READ_ONCE(snapshot_data->ctr_values[0]);
+	/* The counter value after stopping should be less the init value due to overflow */
+	__GUEST_ASSERT(counter_value_post < counter_init_value,
+		       "counter_value_post %lx counter_init_value %lx for counter\n",
+		       counter_value_post, counter_init_value);
+
+	stop_reset_counter(counter, 0);
+}
+
  static void test_invalid_event(void)
  {
  	struct sbiret ret;
@@ -366,6 +422,34 @@ static void test_pmu_events_snaphost(void)
  	GUEST_DONE();
  }
+static void test_pmu_events_overflow(void)
+{
+	int num_counters = 0;
+
+	/* Verify presence of SBI PMU and minimum requrired SBI version */
+	verify_sbi_requirement_assert();
+
+	snapshot_set_shmem(snapshot_gpa, 0);
+	csr_set(CSR_IE, BIT(IRQ_PMU_OVF));
+	local_irq_enable();
+
+	/* Get the counter details */
+	num_counters = get_num_counters();
+	update_counter_info(num_counters);
+
+	/*
+	 * Qemu supports overflow for cycle/instruction.
+	 * This test may fail on any platform that do not support overflow for these two events.
+	 */
+	test_pmu_event_overflow(SBI_PMU_HW_CPU_CYCLES);
+	GUEST_ASSERT_EQ(vcpu_shared_irq_count, 1);
+
+	test_pmu_event_overflow(SBI_PMU_HW_INSTRUCTIONS);
+	GUEST_ASSERT_EQ(vcpu_shared_irq_count, 2);
+
+	GUEST_DONE();
+}
+
  static void run_vcpu(struct kvm_vcpu *vcpu)
  {
  	struct ucall uc;
@@ -451,6 +535,33 @@ static void test_vm_events_snapshot_test(void *guest_code)
  	test_vm_destroy(vm);
  }
+static void test_vm_events_overflow(void *guest_code)
+{
+	struct kvm_vm *vm = NULL;
+	struct kvm_vcpu *vcpu;
+
+	vm = vm_create_with_one_vcpu(&vcpu, guest_code);
+	__TEST_REQUIRE(__vcpu_has_sbi_ext(vcpu, KVM_RISCV_SBI_EXT_PMU),
+				   "SBI PMU not available, skipping test");
+
+	__TEST_REQUIRE(__vcpu_has_isa_ext(vcpu, KVM_RISCV_ISA_EXT_SSCOFPMF),
+				   "Sscofpmf is not available, skipping overflow test");
+
+

extra blank line here


Fixed.

+	test_vm_setup_snapshot_mem(vm, vcpu);
+	vm_init_vector_tables(vm);
+	vm_install_interrupt_handler(vm, guest_irq_handler);
+
+	vcpu_init_vector_tables(vcpu);
+	/* Initialize guest timer frequency. */
+	vcpu_get_reg(vcpu, RISCV_TIMER_REG(frequency), &timer_freq);
+	sync_global_to_guest(vm, timer_freq);
+
+	run_vcpu(vcpu);
+
+	test_vm_destroy(vm);
+}
+
  int main(void)
  {
  	pr_info("SBI PMU basic test : starting\n");
@@ -463,5 +574,8 @@ int main(void)
  	test_vm_events_snapshot_test(test_pmu_events_snaphost);
  	pr_info("SBI PMU event verification with snapshot test : PASS\n");
+ test_vm_events_overflow(test_pmu_events_overflow);
+	pr_info("SBI PMU event verification with overflow test : PASS\n");
+
  	return 0;
  }
--
2.34.1


Other than the command line option idea,

Reviewed-by: Andrew Jones <ajones@xxxxxxxxxxxxxxxx>

Thanks,
drew





[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux