[kvm-unit-tests PATCH v8 05/35] arch-run: Add a "continuous" migration option for tests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The cooperative migration protocol is very good to control precise
pre and post conditions for a migration event. However in some cases
its intrusiveness to the test program, can mask problems and make
analysis more difficult.

For example to stress test migration vs concurrent complicated
memory access, including TLB refill, ram dirtying, etc., then the
tight spin at getchar() and resumption of the workload after
migration is unhelpful.

This adds a continuous migration mode that directs the harness to
perform migrations continually. This is added to the migration
selftests, which also sees cooperative migration iterations reduced
to avoid increasing test time too much.

Signed-off-by: Nicholas Piggin <npiggin@xxxxxxxxx>
---
 common/selftest-migration.c | 16 +++++++++--
 lib/migrate.c               | 18 ++++++++++++
 lib/migrate.h               |  3 ++
 scripts/arch-run.bash       | 55 ++++++++++++++++++++++++++++++++-----
 4 files changed, 82 insertions(+), 10 deletions(-)

diff --git a/common/selftest-migration.c b/common/selftest-migration.c
index 0afd8581c..9a9b61835 100644
--- a/common/selftest-migration.c
+++ b/common/selftest-migration.c
@@ -9,12 +9,13 @@
  */
 #include <libcflat.h>
 #include <migrate.h>
+#include <asm/time.h>
 
-#define NR_MIGRATIONS 30
+#define NR_MIGRATIONS 15
 
 int main(int argc, char **argv)
 {
-	report_prefix_push("migration");
+	report_prefix_push("migration harness");
 
 	if (argc > 1 && !strcmp(argv[1], "skip")) {
 		migrate_skip();
@@ -24,7 +25,16 @@ int main(int argc, char **argv)
 
 		for (i = 0; i < NR_MIGRATIONS; i++)
 			migrate_quiet();
-		report(true, "simple harness stress");
+		report(true, "cooperative migration");
+
+		migrate_begin_continuous();
+		mdelay(2000);
+		migrate_end_continuous();
+		mdelay(1000);
+		migrate_begin_continuous();
+		mdelay(2000);
+		migrate_end_continuous();
+		report(true, "continuous migration");
 	}
 
 	report_prefix_pop();
diff --git a/lib/migrate.c b/lib/migrate.c
index 1d22196b7..770f76d5c 100644
--- a/lib/migrate.c
+++ b/lib/migrate.c
@@ -60,3 +60,21 @@ void migrate_skip(void)
 	puts("Skipped VM migration (quiet)\n");
 	(void)getchar();
 }
+
+void migrate_begin_continuous(void)
+{
+	puts("Begin continuous migration\n");
+	(void)getchar();
+}
+
+void migrate_end_continuous(void)
+{
+	/*
+	 * Migration can split this output between source and dest QEMU
+	 * output files, print twice and match once to always cope with
+	 * a split.
+	 */
+	puts("End continuous migration\n");
+	puts("End continuous migration (quiet)\n");
+	(void)getchar();
+}
diff --git a/lib/migrate.h b/lib/migrate.h
index db6e0c501..35b6703a2 100644
--- a/lib/migrate.h
+++ b/lib/migrate.h
@@ -11,3 +11,6 @@ void migrate_quiet(void);
 void migrate_once(void);
 
 void migrate_skip(void);
+
+void migrate_begin_continuous(void);
+void migrate_end_continuous(void);
diff --git a/scripts/arch-run.bash b/scripts/arch-run.bash
index 4a1aab48d..1901a929f 100644
--- a/scripts/arch-run.bash
+++ b/scripts/arch-run.bash
@@ -125,15 +125,17 @@ qmp_events ()
 filter_quiet_msgs ()
 {
 	grep -v "Now migrate the VM (quiet)" |
+	grep -v "Begin continuous migration (quiet)" |
+	grep -v "End continuous migration (quiet)" |
 	grep -v "Skipped VM migration (quiet)"
 }
 
 seen_migrate_msg ()
 {
 	if [ $skip_migration -eq 1 ]; then
-		grep -q -e "Now migrate the VM" < $1
+	        grep -q -e "Now migrate the VM" -e "Begin continuous migration" < $1
 	else
-		grep -q -e "Now migrate the VM" -e "Skipped VM migration" < $1
+	        grep -q -e "Now migrate the VM" -e "Begin continuous migration" -e "Skipped VM migration" < $1
 	fi
 }
 
@@ -161,6 +163,7 @@ run_migration ()
 	src_qmpout=/dev/null
 	dst_qmpout=/dev/null
 	skip_migration=0
+	continuous_migration=0
 
 	mkfifo ${src_outfifo}
 	mkfifo ${dst_outfifo}
@@ -186,9 +189,12 @@ run_migration ()
 	do_migration || return $?
 
 	while ps -p ${live_pid} > /dev/null ; do
-		# Wait for test exit or further migration messages.
-		if ! seen_migrate_msg ${src_out} ;  then
+		if [ ${continuous_migration} -eq 1 ] ; then
+			do_migration || return $?
+		elif ! seen_migrate_msg ${src_out} ;  then
 			sleep 0.1
+		elif grep -q "Begin continuous migration" < ${src_out} ; then
+			do_migration || return $?
 		elif grep -q "Now migrate the VM" < ${src_out} ; then
 			do_migration || return $?
 		elif [ $skip_migration -eq 0 ] && grep -q "Skipped VM migration" < ${src_out} ; then
@@ -218,7 +224,7 @@ do_migration ()
 
 	# The test must prompt the user to migrate, so wait for the
 	# "Now migrate VM" or similar console message.
-	while ! seen_migrate_msg ${src_out} ; do
+	while [ ${continuous_migration} -eq 0 ] && ! seen_migrate_msg ${src_out} ; do
 		if ! ps -p ${live_pid} > /dev/null ; then
 			echo > ${dst_infifo}
 			qmp ${dst_qmp} '"quit"'> ${dst_qmpout} 2>/dev/null
@@ -229,12 +235,32 @@ do_migration ()
 		sleep 0.1
 	done
 
+	if grep -q "Begin continuous migration" < ${src_out} ; then
+		if [ ${continuous_migration} -eq 1 ] ; then
+			echo > ${dst_infifo}
+			qmp ${dst_qmp} '"quit"'> ${dst_qmpout} 2>/dev/null
+			echo "ERROR: Continuous migration already begun." >&2
+			qmp ${src_qmp} '"quit"'> ${src_qmpout} 2>/dev/null
+			return 3
+		fi
+		continuous_migration=1
+		echo > ${src_infifo}
+	fi
+
 	# Wait until the destination has created the incoming and qmp sockets
 	while ! [ -S ${dst_incoming} ] ; do sleep 0.1 ; done
 	while ! [ -S ${dst_qmp} ] ; do sleep 0.1 ; done
 
 	if [ $skip_migration -eq 0 ] && grep -q "Skipped VM migration" < ${src_out} ; then
 		# May not get any migrations, exit to main loop for now...
+		# No migrations today, shut down dst in an orderly manner...
+		if [ ${continuous_migration} -eq 1 ] ; then
+			echo > ${dst_infifo}
+			qmp ${dst_qmp} '"quit"'> ${dst_qmpout} 2>/dev/null
+			echo "ERROR: Can't skip in continuous migration." >&2
+			qmp ${src_qmp} '"quit"'> ${src_qmpout} 2>/dev/null
+			return 3
+		fi
 		echo > ${dst_infifo}
 		qmp ${dst_qmp} '"quit"'> ${dst_qmpout} 2>/dev/null
 		echo > ${src_infifo} # Resume src and carry on.
@@ -266,8 +292,23 @@ do_migration ()
 
 	qmp ${src_qmp} '"quit"'> ${src_qmpout} 2>/dev/null
 
-	# keypress to dst so getchar completes and test continues
-	echo > ${dst_infifo}
+	# Should we end continuous migration?
+	if grep -q "End continuous migration" < ${src_out} ; then
+		if [ ${continuous_migration} -eq 0 ] ; then
+			echo "ERROR: Can't end continuous migration when not started." >&2
+			echo > ${dst_infifo}
+			qmp ${dst_qmp} '"quit"'> ${dst_qmpout} 2>/dev/null
+			qmp ${src_qmp} '"quit"'> ${src_qmpout} 2>/dev/null
+			return 3
+		fi
+		continuous_migration=0
+		echo > ${src_infifo}
+	fi
+
+	if [ ${continuous_migration} -eq 0 ]; then
+		# keypress to dst so getchar completes and test continues
+		echo > ${dst_infifo}
+	fi
 
 	# Wait for the incoming socket being removed, ready for next destination
 	while [ -S ${dst_incoming} ] ; do sleep 0.1 ; done
-- 
2.43.0





[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux