The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.
Thanks,
Sasha
------------------ original commit in Linus's tree ------------------
>From fe9a7082684eb059b925c535682e68c34d487d43 Mon Sep 17 00:00:00 2001
From: Alex Williamson <alex.williamson@xxxxxxxxxx>
Date: Fri, 8 Mar 2024 16:05:22 -0700
Subject: [PATCH] vfio/pci: Disable auto-enable of exclusive INTx IRQ
Currently for devices requiring masking at the irqchip for INTx, ie.
devices without DisINTx support, the IRQ is enabled in request_irq()
and subsequently disabled as necessary to align with the masked status
flag. This presents a window where the interrupt could fire between
these events, resulting in the IRQ incrementing the disable depth twice.
This would be unrecoverable for a user since the masked flag prevents
nested enables through vfio.
Instead, invert the logic using IRQF_NO_AUTOEN such that exclusive INTx
is never auto-enabled, then unmask as required.
Cc: <stable@xxxxxxxxxxxxxxx>
Fixes: 89e1f7d4c66d ("vfio: Add PCI device driver")
Reviewed-by: Kevin Tian <kevin.tian@xxxxxxxxx>
Reviewed-by: Eric Auger <eric.auger@xxxxxxxxxx>
Link: https://lore.kernel.org/r/20240308230557.805580-2-alex.williamson@xxxxxxxxxx
Signed-off-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
---
drivers/vfio/pci/vfio_pci_intrs.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
index 237beac838097..136101179fcbd 100644
--- a/drivers/vfio/pci/vfio_pci_intrs.c
+++ b/drivers/vfio/pci/vfio_pci_intrs.c
@@ -296,8 +296,15 @@ static int vfio_intx_set_signal(struct vfio_pci_core_device *vdev, int fd)
ctx->trigger = trigger;
+ /*
+ * Devices without DisINTx support require an exclusive interrupt,
+ * IRQ masking is performed at the IRQ chip. The masked status is
+ * protected by vdev->irqlock. Setup the IRQ without auto-enable and
+ * unmask as necessary below under lock. DisINTx is unmodified by
+ * the IRQ configuration and may therefore use auto-enable.
+ */
if (!vdev->pci_2_3)
- irqflags = 0;
+ irqflags = IRQF_NO_AUTOEN;
ret = request_irq(pdev->irq, vfio_intx_handler,
irqflags, ctx->name, vdev);
@@ -308,13 +315,9 @@ static int vfio_intx_set_signal(struct vfio_pci_core_device *vdev, int fd)
return ret;
}
- /*
- * INTx disable will stick across the new irq setup,
- * disable_irq won't.
- */
spin_lock_irqsave(&vdev->irqlock, flags);
- if (!vdev->pci_2_3 && ctx->masked)
- disable_irq_nosync(pdev->irq);
+ if (!vdev->pci_2_3 && !ctx->masked)
+ enable_irq(pdev->irq);
spin_unlock_irqrestore(&vdev->irqlock, flags);
return 0;
--
2.43.0
