[RFC PATCH 3/4] KVM: x86/mmu: Mark page/folio accessed only when zapping leaf SPTEs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mark folios as accessed only when zapping leaf SPTEs, which is a rough
heuristic for "only in response to an mmu_notifier invalidation".  Page
aging and LRUs are tolerant of false negatives, i.e. KVM doesn't need to
be precise for correctness, and re-marking folios as accessed when zapping
entire roots or when zapping collapsible SPTEs is expensive and adds very
little value.

E.g. when a VM is dying, all of its memory is being freed; marking folios
accessed at that time provides no known value.  Similarly, because KVM
makes folios as accessed when creating SPTEs, marking all folios as
accessed when userspace happens to delete a memslot doesn't add value.
The folio was marked access when the old SPTE was created, and will be
marked accessed yet again if a vCPU accesses the pfn again after reloading
a new root.  Zapping collapsible SPTEs is a similar story; marking folios
accessed just because userspace disable dirty logging is a side effect of
KVM behavior, not a deliberate goal.

Mark folios accessed when the primary MMU might be invalidating mappings,
e.g. instead of completely dropping calls to kvm_set_pfn_accessed(), as
such zappings are not KVM initiated, i.e. might actually be related to
page aging and LRU activity.

Note, x86 is the only KVM architecture that "double dips"; every other
arch marks pfns as accessed only when mapping into the guest, not when
mapping into the guest _and_ when removing from the guest.

Signed-off-by: Sean Christopherson <seanjc@xxxxxxxxxx>
---
 Documentation/virt/kvm/locking.rst | 76 +++++++++++++++---------------
 arch/x86/kvm/mmu/mmu.c             |  4 +-
 arch/x86/kvm/mmu/tdp_mmu.c         |  7 ++-
 3 files changed, 43 insertions(+), 44 deletions(-)

diff --git a/Documentation/virt/kvm/locking.rst b/Documentation/virt/kvm/locking.rst
index 02880d5552d5..8b3bb9fe60bf 100644
--- a/Documentation/virt/kvm/locking.rst
+++ b/Documentation/virt/kvm/locking.rst
@@ -138,49 +138,51 @@ Then, we can ensure the dirty bitmaps is correctly set for a gfn.
 
 2) Dirty bit tracking
 
-In the origin code, the spte can be fast updated (non-atomically) if the
+In the original code, the spte can be fast updated (non-atomically) if the
 spte is read-only and the Accessed bit has already been set since the
 Accessed bit and Dirty bit can not be lost.
 
 But it is not true after fast page fault since the spte can be marked
 writable between reading spte and updating spte. Like below case:
 
-+------------------------------------------------------------------------+
-| At the beginning::                                                     |
-|                                                                        |
-|	spte.W = 0                                                       |
-|	spte.Accessed = 1                                                |
-+------------------------------------+-----------------------------------+
-| CPU 0:                             | CPU 1:                            |
-+------------------------------------+-----------------------------------+
-| In mmu_spte_clear_track_bits()::   |                                   |
-|                                    |                                   |
-|  old_spte = *spte;                 |                                   |
-|                                    |                                   |
-|                                    |                                   |
-|  /* 'if' condition is satisfied. */|                                   |
-|  if (old_spte.Accessed == 1 &&     |                                   |
-|       old_spte.W == 0)             |                                   |
-|     spte = 0ull;                   |                                   |
-+------------------------------------+-----------------------------------+
-|                                    | on fast page fault path::         |
-|                                    |                                   |
-|                                    |    spte.W = 1                     |
-|                                    |                                   |
-|                                    | memory write on the spte::        |
-|                                    |                                   |
-|                                    |    spte.Dirty = 1                 |
-+------------------------------------+-----------------------------------+
-|  ::                                |                                   |
-|                                    |                                   |
-|   else                             |                                   |
-|     old_spte = xchg(spte, 0ull)    |                                   |
-|   if (old_spte.Accessed == 1)      |                                   |
-|     kvm_set_pfn_accessed(spte.pfn);|                                   |
-|   if (old_spte.Dirty == 1)         |                                   |
-|     kvm_set_pfn_dirty(spte.pfn);   |                                   |
-|     OOPS!!!                        |                                   |
-+------------------------------------+-----------------------------------+
++-------------------------------------------------------------------------+
+| At the beginning::                                                      |
+|                                                                         |
+|	spte.W = 0                                                              |
+|	spte.Accessed = 1                                                       |
++-------------------------------------+-----------------------------------+
+| CPU 0:                              | CPU 1:                            |
++-------------------------------------+-----------------------------------+
+| In mmu_spte_update()::              |                                   |
+|                                     |                                   |
+|  old_spte = *spte;                  |                                   |
+|                                     |                                   |
+|                                     |                                   |
+|  /* 'if' condition is satisfied. */ |                                   |
+|  if (old_spte.Accessed == 1 &&      |                                   |
+|       old_spte.W == 0)              |                                   |
+|     spte = new_spte;                |                                   |
++-------------------------------------+-----------------------------------+
+|                                     | on fast page fault path::         |
+|                                     |                                   |
+|                                     |    spte.W = 1                     |
+|                                     |                                   |
+|                                     | memory write on the spte::        |
+|                                     |                                   |
+|                                     |    spte.Dirty = 1                 |
++-------------------------------------+-----------------------------------+
+|  ::                                 |                                   |
+|                                     |                                   |
+|   else                              |                                   |
+|     old_spte = xchg(spte, new_spte);|                                   |
+|   if (old_spte.Accessed &&          |                                   |
+|       !new_spte.Accessed)           |                                   |
+|     flush = true;                   |                                   |
+|   if (old_spte.Dirty &&             |                                   |
+|       !new_spte.Dirty)              |                                   |
+|     flush = true;                   |                                   |
+|     OOPS!!!                         |                                   |
++-------------------------------------+-----------------------------------+
 
 The Dirty bit is lost in this case.
 
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index bd2240b94ff6..0a6c6619d213 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -539,10 +539,8 @@ static bool mmu_spte_update(u64 *sptep, u64 new_spte)
 	 * to guarantee consistency between TLB and page tables.
 	 */
 
-	if (is_accessed_spte(old_spte) && !is_accessed_spte(new_spte)) {
+	if (is_accessed_spte(old_spte) && !is_accessed_spte(new_spte))
 		flush = true;
-		kvm_set_pfn_accessed(spte_to_pfn(old_spte));
-	}
 
 	if (is_dirty_spte(old_spte) && !is_dirty_spte(new_spte))
 		flush = true;
diff --git a/arch/x86/kvm/mmu/tdp_mmu.c b/arch/x86/kvm/mmu/tdp_mmu.c
index 5866a664f46e..340d5af454c6 100644
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -520,10 +520,6 @@ static void handle_changed_spte(struct kvm *kvm, int as_id, gfn_t gfn,
 	if (was_present && !was_leaf &&
 	    (is_leaf || !is_present || WARN_ON_ONCE(pfn_changed)))
 		handle_removed_pt(kvm, spte_to_child_pt(old_spte, level), shared);
-
-	if (was_leaf && is_accessed_spte(old_spte) &&
-	    (!is_present || !is_accessed_spte(new_spte) || pfn_changed))
-		kvm_set_pfn_accessed(spte_to_pfn(old_spte));
 }
 
 /*
@@ -841,6 +837,9 @@ static bool tdp_mmu_zap_leafs(struct kvm *kvm, struct kvm_mmu_page *root,
 
 		tdp_mmu_iter_set_spte(kvm, &iter, 0);
 
+		if (is_accessed_spte(iter.old_spte))
+			kvm_set_pfn_accessed(spte_to_pfn(iter.old_spte));
+
 		/*
 		 * Zappings SPTEs in invalid roots doesn't require a TLB flush,
 		 * see kvm_tdp_mmu_zap_invalidated_roots() for details.
-- 
2.44.0.291.gc1ea87d7ee-goog





[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux