Re: [PATCH v11 18/35] KVM: SEV: Add KVM_SEV_SNP_LAUNCH_UPDATE command

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Dec 30, 2023 at 10:27 AM Michael Roth <michael.roth@xxxxxxx> wrote:
>
> From: Brijesh Singh <brijesh.singh@xxxxxxx>
>
> The KVM_SEV_SNP_LAUNCH_UPDATE command can be used to insert data into
> the guest's memory. The data is encrypted with the cryptographic context
> created with the KVM_SEV_SNP_LAUNCH_START.
>
> In addition to the inserting data, it can insert a two special pages
> into the guests memory: the secrets page and the CPUID page.
>
> While terminating the guest, reclaim the guest pages added in the RMP
> table. If the reclaim fails, then the page is no longer safe to be
> released back to the system and leak them.
>
> For more information see the SEV-SNP specification.
>
> Co-developed-by: Michael Roth <michael.roth@xxxxxxx>
> Signed-off-by: Michael Roth <michael.roth@xxxxxxx>
> Signed-off-by: Brijesh Singh <brijesh.singh@xxxxxxx>
> Signed-off-by: Ashish Kalra <ashish.kalra@xxxxxxx>
> ---
>  .../virt/kvm/x86/amd-memory-encryption.rst    |  28 +++
>  arch/x86/kvm/svm/sev.c                        | 181 ++++++++++++++++++
>  include/uapi/linux/kvm.h                      |  19 ++
>  3 files changed, 228 insertions(+)
>
> diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst
> index b1beb2fe8766..d4325b26724c 100644
> --- a/Documentation/virt/kvm/x86/amd-memory-encryption.rst
> +++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst
> @@ -485,6 +485,34 @@ Returns: 0 on success, -negative on error
>
>  See the SEV-SNP specification for further detail on the launch input.
>
> +20. KVM_SNP_LAUNCH_UPDATE
> +-------------------------
> +
> +The KVM_SNP_LAUNCH_UPDATE is used for encrypting a memory region. It also
> +calculates a measurement of the memory contents. The measurement is a signature
> +of the memory contents that can be sent to the guest owner as an attestation
> +that the memory was encrypted correctly by the firmware.

Nit: The measurement is a rolling hash of all the launch updated pages
and their metadata. The attestation quote contains a signature of
information about the SNP VM including this measurement.

Also technically the attestation doesn't confirm to the guest owner
the memory was encrypted correctly, I don't think we can
cryptographically prove that. But the attestation does provide the
guest owner confirmation about the exact steps the ASP took in
creating the SNP VMs initial memory context. If the ASP firmware is
bug free and follows the spec, your 'memory was encrypted correctly by
the firmware' line is implied.

> +
> +Parameters (in): struct  kvm_snp_launch_update
> +
> +Returns: 0 on success, -negative on error
> +
> +::
> +
> +        struct kvm_sev_snp_launch_update {
> +                __u64 start_gfn;        /* Guest page number to start from. */
> +                __u64 uaddr;            /* userspace address need to be encrypted */
> +                __u32 len;              /* length of memory region */
> +                __u8 imi_page;          /* 1 if memory is part of the IMI */
> +                __u8 page_type;         /* page type */
> +                __u8 vmpl3_perms;       /* VMPL3 permission mask */
> +                __u8 vmpl2_perms;       /* VMPL2 permission mask */
> +                __u8 vmpl1_perms;       /* VMPL1 permission mask */
> +        };
> +
> +See the SEV-SNP spec for further details on how to build the VMPL permission
> +mask and page type.
> +
>  References
>  ==========
>
> diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
> index e2f4d4bc125c..d60209e6e68b 100644
> --- a/arch/x86/kvm/svm/sev.c
> +++ b/arch/x86/kvm/svm/sev.c
> @@ -245,6 +245,36 @@ static void sev_decommission(unsigned int handle)
>         sev_guest_decommission(&decommission, NULL);
>  }
>
> +static int snp_page_reclaim(u64 pfn)
> +{
> +       struct sev_data_snp_page_reclaim data = {0};
> +       int err, rc;
> +
> +       data.paddr = __sme_set(pfn << PAGE_SHIFT);
> +       rc = sev_do_cmd(SEV_CMD_SNP_PAGE_RECLAIM, &data, &err);
> +       if (rc) {
> +               /*
> +                * If the reclaim failed, then page is no longer safe
> +                * to use.
> +                */
> +               snp_leak_pages(pfn, 1);
> +       }
> +
> +       return rc;
> +}
> +
> +static int host_rmp_make_shared(u64 pfn, enum pg_level level, bool leak)
> +{
> +       int rc;
> +
> +       rc = rmp_make_shared(pfn, level);
> +       if (rc && leak)
> +               snp_leak_pages(pfn,
> +                              page_level_size(level) >> PAGE_SHIFT);
> +
> +       return rc;
> +}
> +
>  static void sev_unbind_asid(struct kvm *kvm, unsigned int handle)
>  {
>         struct sev_data_deactivate deactivate;
> @@ -1990,6 +2020,154 @@ static int snp_launch_start(struct kvm *kvm, struct kvm_sev_cmd *argp)
>         return rc;
>  }
>
> +static int snp_launch_update_gfn_handler(struct kvm *kvm,
> +                                        struct kvm_gfn_range *range,
> +                                        void *opaque)
> +{
> +       struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info;
> +       struct kvm_memory_slot *memslot = range->slot;
> +       struct sev_data_snp_launch_update data = {0};
> +       struct kvm_sev_snp_launch_update params;
> +       struct kvm_sev_cmd *argp = opaque;
> +       int *error = &argp->error;
> +       int i, n = 0, ret = 0;
> +       unsigned long npages;
> +       kvm_pfn_t *pfns;
> +       gfn_t gfn;
> +
> +       if (!kvm_slot_can_be_private(memslot)) {
> +               pr_err("SEV-SNP requires private memory support via guest_memfd.\n");
> +               return -EINVAL;
> +       }
> +
> +       if (copy_from_user(&params, (void __user *)(uintptr_t)argp->data, sizeof(params))) {
> +               pr_err("Failed to copy user parameters for SEV-SNP launch.\n");
> +               return -EFAULT;
> +       }
> +
> +       data.gctx_paddr = __psp_pa(sev->snp_context);
> +
> +       npages = range->end - range->start;
> +       pfns = kvmalloc_array(npages, sizeof(*pfns), GFP_KERNEL_ACCOUNT);
> +       if (!pfns)
> +               return -ENOMEM;
> +
> +       pr_debug("%s: GFN range 0x%llx-0x%llx, type %d\n", __func__,
> +                range->start, range->end, params.page_type);
> +
> +       for (gfn = range->start, i = 0; gfn < range->end; gfn++, i++) {
> +               int order, level;
> +               bool assigned;
> +               void *kvaddr;
> +
> +               ret = __kvm_gmem_get_pfn(kvm, memslot, gfn, &pfns[i], &order, false);
> +               if (ret)
> +                       goto e_release;
> +
> +               n++;
> +               ret = snp_lookup_rmpentry((u64)pfns[i], &assigned, &level);
> +               if (ret || assigned) {
> +                       pr_err("Failed to ensure GFN 0x%llx is in initial shared state, ret: %d, assigned: %d\n",
> +                              gfn, ret, assigned);
> +                       return -EFAULT;
> +               }
> +
> +               kvaddr = pfn_to_kaddr(pfns[i]);
> +               if (!virt_addr_valid(kvaddr)) {
> +                       pr_err("Invalid HVA 0x%llx for GFN 0x%llx\n", (uint64_t)kvaddr, gfn);
> +                       ret = -EINVAL;
> +                       goto e_release;
> +               }
> +
> +               ret = kvm_read_guest_page(kvm, gfn, kvaddr, 0, PAGE_SIZE);
> +               if (ret) {
> +                       pr_err("Guest read failed, ret: 0x%x\n", ret);

Should these be pr_debugs()?  This could get noisy.

> +                       goto e_release;
> +               }
> +
> +               ret = rmp_make_private(pfns[i], gfn << PAGE_SHIFT, PG_LEVEL_4K,
> +                                      sev_get_asid(kvm), true);
> +               if (ret) {
> +                       ret = -EFAULT;
> +                       goto e_release;
> +               }
> +
> +               data.address = __sme_set(pfns[i] << PAGE_SHIFT);
> +               data.page_size = PG_LEVEL_TO_RMP(PG_LEVEL_4K);
> +               data.page_type = params.page_type;
> +               data.vmpl3_perms = params.vmpl3_perms;
> +               data.vmpl2_perms = params.vmpl2_perms;
> +               data.vmpl1_perms = params.vmpl1_perms;
> +               ret = __sev_issue_cmd(argp->sev_fd, SEV_CMD_SNP_LAUNCH_UPDATE,
> +                                     &data, error);
> +               if (ret) {
> +                       pr_err("SEV-SNP launch update failed, ret: 0x%x, fw_error: 0x%x\n",
> +                              ret, *error);
> +                       snp_page_reclaim(pfns[i]);
> +
> +                       /*
> +                        * When invalid CPUID function entries are detected, the firmware
> +                        * corrects these entries for debugging purpose and leaves the
> +                        * page unencrypted so it can be provided users for debugging
> +                        * and error-reporting.
> +                        *
> +                        * Copy the corrected CPUID page back to shared memory so
> +                        * userpsace can retrieve this information.

Typo: userpsace





[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux