On 3/2/24 16:47, Bibo Mao wrote:
Add documentation topic for using pv_virt when running as a guest
on KVM hypervisor.
Signed-off-by: Bibo Mao <maobibo@xxxxxxxxxxx>
---
Documentation/virt/kvm/index.rst | 1 +
.../virt/kvm/loongarch/hypercalls.rst | 79 +++++++++++++++++++
Documentation/virt/kvm/loongarch/index.rst | 10 +++
3 files changed, 90 insertions(+)
create mode 100644 Documentation/virt/kvm/loongarch/hypercalls.rst
create mode 100644 Documentation/virt/kvm/loongarch/index.rst
diff --git a/Documentation/virt/kvm/index.rst b/Documentation/virt/kvm/index.rst
index ad13ec55ddfe..9ca5a45c2140 100644
--- a/Documentation/virt/kvm/index.rst
+++ b/Documentation/virt/kvm/index.rst
@@ -14,6 +14,7 @@ KVM
s390/index
ppc-pv
x86/index
+ loongarch/index
locking
vcpu-requests
diff --git a/Documentation/virt/kvm/loongarch/hypercalls.rst b/Documentation/virt/kvm/loongarch/hypercalls.rst
new file mode 100644
index 000000000000..1679e48d67d2
--- /dev/null
+++ b/Documentation/virt/kvm/loongarch/hypercalls.rst
@@ -0,0 +1,79 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+The LoongArch paravirtual interface
+===================================
+
+KVM hypercalls use the HVCL instruction with code 0x100, and the hypercall
+number is put in a0 and up to five arguments may be placed in a1-a5, the
+return value is placed in v0 (alias with a0).
Just say a0: the name v0 is long deprecated (has been the case ever
since LoongArch got mainlined).
+
+The code for that interface can be found in arch/loongarch/kvm/*
+
+Querying for existence
+======================
+
+To find out if we're running on KVM or not, cpucfg can be used with index
+CPUCFG_KVM_BASE (0x40000000), cpucfg range between 0x40000000 - 0x400000FF
+is marked as a specially reserved range. All existing and future processors
+will not implement any features in this range.
+
+When Linux is running on KVM, cpucfg with index CPUCFG_KVM_BASE (0x40000000)
+returns magic string "KVM\0"
+
+Once you determined you're running under a PV capable KVM, you can now use
+hypercalls as described below.
So this is still the approach similar to the x86 CPUID-based
implementation. But here the non-privileged behavior isn't specified --
I see there is PLV checking in Patch 3 but it's safer to have the
requirement spelled out here too.
But I still think this approach touches more places than strictly
needed. As it is currently the case in
arch/loongarch/kernel/cpu-probe.c, the FEATURES IOCSR is checked for a
bit IOCSRF_VM that already signifies presence of a hypervisor; if this
information can be interpreted as availability of the HVCL instruction
(which I suppose is the case -- a hypervisor can always trap-and-emulate
in case HVCL isn't provided by hardware), here we can already start
making calls with HVCL.
We can and should define a uniform interface for probing the hypervisor
kind, similar to the centrally-managed RISC-V SBI implementation ID
registry [1]: otherwise future non-KVM hypervisors would have to
1. somehow pretend they are KVM and eventually fail to do so, leading to
subtle incompatibilities,
2. invent another way of probing for their existence,
3. piggy-back on the current KVM definition, which is inelegant (reading
the LoongArch-KVM-defined CPUCFG leaf only to find it's not KVM) and
utterly makes the definition here *not* KVM-specific.
[1]:
https://github.com/riscv-non-isa/riscv-sbi-doc/blob/v2.0/src/ext-base.adoc
My take on this:
To check if we are running on Linux KVM or not, first check IOCSR 0x8
(``LOONGARCH_IOCSR_FEATURES``) for bit 11 (``IOCSRF_VM``); we are
running under a hypervisor if the bit is set. Then invoke ``HVCL 0`` to
find out the hypervisor implementation ID; a return value in ``$a0`` of
0x004d564b (``KVM\0``) means Linux KVM, in which case the rest of the
convention applies.
+
+KVM hypercall ABI
+=================
+
+Hypercall ABI on KVM is simple, only one scratch register a0 (v0) and at most
+five generic registers used as input parameter. FP register and vector register
+is not used for input register and should not be modified during hypercall.
+Hypercall function can be inlined since there is only one scratch register.
It should be pointed out explicitly that on hypercall return all
architectural state except ``$a0`` is preserved. Or is the whole ``$a0 -
$t8`` range clobbered, just like with Linux syscalls?
+
+The parameters are as follows:
+
+ ======== ================ ================
+ Register IN OUT
+ ======== ================ ================
+ a0 function number Return code
+ a1 1st parameter -
+ a2 2nd parameter -
+ a3 3rd parameter -
+ a4 4th parameter -
+ a5 5th parameter -
+ ======== ================ ================
+
+Return codes can be as follows:
+
+ ==== =========================
+ Code Meaning
+ ==== =========================
+ 0 Success
+ -1 Hypercall not implemented
+ -2 Hypercall parameter error
What about re-using well-known errno's, like -ENOSYS for "hypercall not
implemented" and -EINVAL for "invalid parameter"? This could save people
some hair when more error codes are added in the future.
+ ==== =========================
+
+KVM Hypercalls Documentation
+============================
+
+The template for each hypercall is:
+1. Hypercall name
+2. Purpose
+
+1. KVM_HCALL_FUNC_PV_IPI
+------------------------
+
+:Purpose: Send IPIs to multiple vCPUs.
+
+- a0: KVM_HCALL_FUNC_PV_IPI
+- a1: lower part of the bitmap of destination physical CPUIDs
+- a2: higher part of the bitmap of destination physical CPUIDs
+- a3: the lowest physical CPUID in bitmap
"CPU ID", instead of "CPUID" for clarity: I suppose most people reading
this also know about x86, so "CPUID" could evoke the wrong intuition.
This function is equivalent to the C signature "void hypcall(int func,
u128 mask, int lowest_cpu_id)", which I think is fine, but one can also
see that the return value description is missing.
+
+The hypercall lets a guest send multicast IPIs, with at most 128
+destinations per hypercall. The destinations are represented by a bitmap
+contained in the first two arguments (a1 and a2). Bit 0 of a1 corresponds
+to the physical CPUID in the third argument (a3), bit 1 corresponds to the
+physical ID a3+1, and so on.
diff --git a/Documentation/virt/kvm/loongarch/index.rst b/Documentation/virt/kvm/loongarch/index.rst
new file mode 100644
index 000000000000..83387b4c5345
--- /dev/null
+++ b/Documentation/virt/kvm/loongarch/index.rst
@@ -0,0 +1,10 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+KVM for LoongArch systems
+=========================
+
+.. toctree::
+ :maxdepth: 2
+
+ hypercalls.rst
--
WANG "xen0n" Xuerui
Linux/LoongArch mailing list: https://lore.kernel.org/loongarch/
