在2024年2月26日二月 上午8:04，maobibo写道：
> On 2024/2/26 下午2:12, Huacai Chen wrote:
>> On Mon, Feb 26, 2024 at 10:04 AM maobibo <maobibo@xxxxxxxxxxx> wrote:
>>>
>>>
>>>
>>> On 2024/2/24 下午5:13, Huacai Chen wrote:
>>>> Hi, Bibo,
>>>>
>>>> On Thu, Feb 22, 2024 at 11:28 AM Bibo Mao <maobibo@xxxxxxxxxxx> wrote:
>>>>>
>>>>> Instruction cpucfg can be used to get processor features. And there
>>>>> is trap exception when it is executed in VM mode, and also it is
>>>>> to provide cpu features to VM. On real hardware cpucfg area 0 - 20
>>>>> is used. Here one specified area 0x40000000 -- 0x400000ff is used
>>>>> for KVM hypervisor to privide PV features, and the area can be extended
>>>>> for other hypervisors in future. This area will never be used for
>>>>> real HW, it is only used by software.
>>>> After reading and thinking, I find that the hypercall method which is
>>>> used in our productive kernel is better than this cpucfg method.
>>>> Because hypercall is more simple and straightforward, plus we don't
>>>> worry about conflicting with the real hardware.
>>> No, I do not think so. cpucfg is simper than hypercall, hypercall can
>>> be in effect when system runs in guest mode. In some scenario like TCG
>>> mode, hypercall is illegal intruction, however cpucfg can work.
>> Nearly all architectures use hypercall except x86 for its historical
> Only x86 support multiple hypervisors and there is multiple hypervisor
> in x86 only. It is an advantage, not historical reason.
I do believe that all those stuff should not be exposed to guest user space
for security reasons.
Also for different implementations of hypervisors they may have different
PV features behavior, using hypcall to perform feature detection
can pass more information to help us cope with hypervisor diversity.
>
>> reasons. If we use CPUCFG, then the hypervisor information is
>> unnecessarily leaked to userspace, and this may be a security issue.
>> Meanwhile, I don't think TCG mode needs PV features.
> Besides PV features, there is other features different with real hw such
> as virtio device, virtual interrupt controller.
Those are *device* level information, they must be passed in firmware
interfaces to keep processor emulation sane.
Thanks
>
> Regards
> Bibo Mao
>
>>
>> I consulted with Jiaxun before, and maybe he can give some more comments.
>>
>>>
>>> Extioi virtualization extension will be added later, cpucfg can be used
>>> to get extioi features. It is unlikely that extioi driver depends on
>>> PARA_VIRT macro if hypercall is used to get features.
>> CPUCFG is per-core information, if we really need something about
>> extioi, it should be in iocsr (LOONGARCH_IOCSR_FEATURES).
>>
>>
>> Huacai
>>
>>>
>>> Regards
>>> Bibo Mao
>>>
>>>>
>>>> Huacai
>>>>
>>>>>
>>>>> Signed-off-by: Bibo Mao <maobibo@xxxxxxxxxxx>
>>>>> ---
>>>>> arch/loongarch/include/asm/inst.h | 1 +
>>>>> arch/loongarch/include/asm/loongarch.h | 10 ++++++
>>>>> arch/loongarch/kvm/exit.c | 46 +++++++++++++++++---------
>>>>> 3 files changed, 41 insertions(+), 16 deletions(-)
>>>>>
>>>>> diff --git a/arch/loongarch/include/asm/inst.h b/arch/loongarch/include/asm/inst.h
>>>>> index d8f637f9e400..ad120f924905 100644
>>>>> --- a/arch/loongarch/include/asm/inst.h
>>>>> +++ b/arch/loongarch/include/asm/inst.h
>>>>> @@ -67,6 +67,7 @@ enum reg2_op {
>>>>> revhd_op = 0x11,
>>>>> extwh_op = 0x16,
>>>>> extwb_op = 0x17,
>>>>> + cpucfg_op = 0x1b,
>>>>> iocsrrdb_op = 0x19200,
>>>>> iocsrrdh_op = 0x19201,
>>>>> iocsrrdw_op = 0x19202,
>>>>> diff --git a/arch/loongarch/include/asm/loongarch.h b/arch/loongarch/include/asm/loongarch.h
>>>>> index 46366e783c84..a1d22e8b6f94 100644
>>>>> --- a/arch/loongarch/include/asm/loongarch.h
>>>>> +++ b/arch/loongarch/include/asm/loongarch.h
>>>>> @@ -158,6 +158,16 @@
>>>>> #define CPUCFG48_VFPU_CG BIT(2)
>>>>> #define CPUCFG48_RAM_CG BIT(3)
>>>>>
>>>>> +/*
>>>>> + * cpucfg index area: 0x40000000 -- 0x400000ff
>>>>> + * SW emulation for KVM hypervirsor
>>>>> + */
>>>>> +#define CPUCFG_KVM_BASE 0x40000000UL
>>>>> +#define CPUCFG_KVM_SIZE 0x100
>>>>> +#define CPUCFG_KVM_SIG CPUCFG_KVM_BASE
>>>>> +#define KVM_SIGNATURE "KVM\0"
>>>>> +#define CPUCFG_KVM_FEATURE (CPUCFG_KVM_BASE + 4)
>>>>> +
>>>>> #ifndef __ASSEMBLY__
>>>>>
>>>>> /* CSR */
>>>>> diff --git a/arch/loongarch/kvm/exit.c b/arch/loongarch/kvm/exit.c
>>>>> index 923bbca9bd22..6a38fd59d86d 100644
>>>>> --- a/arch/loongarch/kvm/exit.c
>>>>> +++ b/arch/loongarch/kvm/exit.c
>>>>> @@ -206,10 +206,37 @@ int kvm_emu_idle(struct kvm_vcpu *vcpu)
>>>>> return EMULATE_DONE;
>>>>> }
>>>>>
>>>>> -static int kvm_trap_handle_gspr(struct kvm_vcpu *vcpu)
>>>>> +static int kvm_emu_cpucfg(struct kvm_vcpu *vcpu, larch_inst inst)
>>>>> {
>>>>> int rd, rj;
>>>>> unsigned int index;
>>>>> +
>>>>> + rd = inst.reg2_format.rd;
>>>>> + rj = inst.reg2_format.rj;
>>>>> + ++vcpu->stat.cpucfg_exits;
>>>>> + index = vcpu->arch.gprs[rj];
>>>>> +
>>>>> + /*
>>>>> + * By LoongArch Reference Manual 2.2.10.5
>>>>> + * Return value is 0 for undefined cpucfg index
>>>>> + */
>>>>> + switch (index) {
>>>>> + case 0 ... (KVM_MAX_CPUCFG_REGS - 1):
>>>>> + vcpu->arch.gprs[rd] = vcpu->arch.cpucfg[index];
>>>>> + break;
>>>>> + case CPUCFG_KVM_SIG:
>>>>> + vcpu->arch.gprs[rd] = *(unsigned int *)KVM_SIGNATURE;
>>>>> + break;
>>>>> + default:
>>>>> + vcpu->arch.gprs[rd] = 0;
>>>>> + break;
>>>>> + }
>>>>> +
>>>>> + return EMULATE_DONE;
>>>>> +}
>>>>> +
>>>>> +static int kvm_trap_handle_gspr(struct kvm_vcpu *vcpu)
>>>>> +{
>>>>> unsigned long curr_pc;
>>>>> larch_inst inst;
>>>>> enum emulation_result er = EMULATE_DONE;
>>>>> @@ -224,21 +251,8 @@ static int kvm_trap_handle_gspr(struct kvm_vcpu *vcpu)
>>>>> er = EMULATE_FAIL;
>>>>> switch (((inst.word >> 24) & 0xff)) {
>>>>> case 0x0: /* CPUCFG GSPR */
>>>>> - if (inst.reg2_format.opcode == 0x1B) {
>>>>> - rd = inst.reg2_format.rd;
>>>>> - rj = inst.reg2_format.rj;
>>>>> - ++vcpu->stat.cpucfg_exits;
>>>>> - index = vcpu->arch.gprs[rj];
>>>>> - er = EMULATE_DONE;
>>>>> - /*
>>>>> - * By LoongArch Reference Manual 2.2.10.5
>>>>> - * return value is 0 for undefined cpucfg index
>>>>> - */
>>>>> - if (index < KVM_MAX_CPUCFG_REGS)
>>>>> - vcpu->arch.gprs[rd] = vcpu->arch.cpucfg[index];
>>>>> - else
>>>>> - vcpu->arch.gprs[rd] = 0;
>>>>> - }
>>>>> + if (inst.reg2_format.opcode == cpucfg_op)
>>>>> + er = kvm_emu_cpucfg(vcpu, inst);
>>>>> break;
>>>>> case 0x4: /* CSR{RD,WR,XCHG} GSPR */
>>>>> er = kvm_handle_csr(vcpu, inst);
>>>>> --
>>>>> 2.39.3
>>>>>
>>>
>>>
--
- Jiaxun
