RE: [PATCH v18 3/3] vfio/nvgrace-gpu: Add vfio pci variant module for grace hopper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: ankita@xxxxxxxxxx <ankita@xxxxxxxxxx>
> Sent: Friday, February 16, 2024 11:01 AM
> 
> From: Ankit Agrawal <ankita@xxxxxxxxxx>
> 
> NVIDIA's upcoming Grace Hopper Superchip provides a PCI-like device
> for the on-chip GPU that is the logical OS representation of the
> internal proprietary chip-to-chip cache coherent interconnect.
> 
> The device is peculiar compared to a real PCI device in that whilst
> there is a real 64b PCI BAR1 (comprising region 2 & region 3) on the
> device, it is not used to access device memory once the faster
> chip-to-chip interconnect is initialized (occurs at the time of host
> system boot). The device memory is accessed instead using the chip-to-chip
> interconnect that is exposed as a contiguous physically addressable
> region on the host. This device memory aperture can be obtained from host
> ACPI table using device_property_read_u64(), according to the FW
> specification. Since the device memory is cache coherent with the CPU,
> it can be mmap into the user VMA with a cacheable mapping using
> remap_pfn_range() and used like a regular RAM. The device memory
> is not added to the host kernel, but mapped directly as this reduces
> memory wastage due to struct pages.
> 
> There is also a requirement of a minimum reserved 1G uncached region
> (termed as resmem) to support the Multi-Instance GPU (MIG) feature [1].
> This is to work around a HW defect. Based on [2], the requisite properties
> (uncached, unaligned access) can be achieved through a VM mapping (S1)
> of NORMAL_NC and host (S2) mapping with MemAttr[2:0]=0b101. To provide
> a different non-cached property to the reserved 1G region, it needs to
> be carved out from the device memory and mapped as a separate region
> in Qemu VMA with pgprot_writecombine(). pgprot_writecombine() sets the
> Qemu VMA page properties (pgprot) as NORMAL_NC.
> 
> Provide a VFIO PCI variant driver that adapts the unique device memory
> representation into a more standard PCI representation facing userspace.
> 
> The variant driver exposes these two regions - the non-cached reserved
> (resmem) and the cached rest of the device memory (termed as usemem) as
> separate VFIO 64b BAR regions. This is divergent from the baremetal
> approach, where the device memory is exposed as a device memory region.
> The decision for a different approach was taken in view of the fact that
> it would necessiate additional code in Qemu to discover and insert those
> regions in the VM IPA, along with the additional VM ACPI DSDT changes to
> communicate the device memory region IPA to the VM workloads. Moreover,
> this behavior would have to be added to a variety of emulators (beyond
> top of tree Qemu) out there desiring grace hopper support.
> 
> Since the device implements 64-bit BAR0, the VFIO PCI variant driver
> maps the uncached carved out region to the next available PCI BAR (i.e.
> comprising of region 2 and 3). The cached device memory aperture is
> assigned BAR region 4 and 5. Qemu will then naturally generate a PCI
> device in the VM with the uncached aperture reported as BAR2 region,
> the cacheable as BAR4. The variant driver provides emulation for these
> fake BARs' PCI config space offset registers.
> 
> The hardware ensures that the system does not crash when the memory
> is accessed with the memory enable turned off. It synthesis ~0 reads
> and dropped writes on such access. So there is no need to support the
> disablement/enablement of BAR through PCI_COMMAND config space
> register.
> 
> The memory layout on the host looks like the following:
>                devmem (memlength)
> |--------------------------------------------------|
> |-------------cached------------------------|--NC--|
> |                                           |
> usemem.memphys                              resmem.memphys
> 
> PCI BARs need to be aligned to the power-of-2, but the actual memory on the
> device may not. A read or write access to the physical address from the
> last device PFN up to the next power-of-2 aligned physical address
> results in reading ~0 and dropped writes. Note that the GPU device
> driver [6] is capable of knowing the exact device memory size through
> separate means. The device memory size is primarily kept in the system
> ACPI tables for use by the VFIO PCI variant module.
> 
> Note that the usemem memory is added by the VM Nvidia device driver [5]
> to the VM kernel as memblocks. Hence make the usable memory size
> memblock
> (MEMBLK_SIZE) aligned. This is a hardwired ABI value between the GPU FW
> and
> VFIO driver. The VM device driver make use of the same value for its
> calculation to determine USEMEM size.
> 
> Currently there is no provision in KVM for a S2 mapping with
> MemAttr[2:0]=0b101, but there is an ongoing effort to provide the same [3].
> As previously mentioned, resmem is mapped pgprot_writecombine(), that
> sets the Qemu VMA page properties (pgprot) as NORMAL_NC. Using the
> proposed changes in [3] and [4], KVM marks the region with
> MemAttr[2:0]=0b101 in S2.
> 
> If the device memory properties are not present, the driver registers the
> vfio-pci-core function pointers. Since there are no ACPI memory properties
> generated for the VM, the variant driver inside the VM will only use
> the vfio-pci-core ops and hence try to map the BARs as non cached. This
> is not a problem as the CPUs have FWB enabled which blocks the VM
> mapping's ability to override the cacheability set by the host mapping.
> 
> This goes along with a qemu series [6] to provides the necessary
> implementation of the Grace Hopper Superchip firmware specification so
> that the guest operating system can see the correct ACPI modeling for
> the coherent GPU device. Verified with the CUDA workload in the VM.
> 
> [1] https://www.nvidia.com/en-in/technologies/multi-instance-gpu/
> [2] section D8.5.5 of
> https://developer.arm.com/documentation/ddi0487/latest/
> [3] https://lore.kernel.org/all/20240211174705.31992-1-ankita@xxxxxxxxxx/
> [4] https://lore.kernel.org/all/20230907181459.18145-2-ankita@xxxxxxxxxx/
> [5] https://github.com/NVIDIA/open-gpu-kernel-modules
> [6] https://lore.kernel.org/all/20231203060245.31593-1-ankita@xxxxxxxxxx/
> 
> Signed-off-by: Aniket Agashe <aniketa@xxxxxxxxxx>
> Signed-off-by: Ankit Agrawal <ankita@xxxxxxxxxx>

Reviewed-by: Kevin Tian <kevin.tian@xxxxxxxxx>





[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux