Re: qemu-kvm.0.12.2 aborts on linux

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 28, 2010 at 10:19:37AM -0700, K D wrote:
> Am using yahoo mail and my mails to this mailer gets rejected every time saying message has HTML content etc. Should I use some other mail tool? Below is my issue.
> 
> I am trying to get KVM/qemu running on linux. I compiled 2.6.27.10 by enabling "KVM", "KVM for intel" options at configure time. My box is running with this KVM enabled inside kernel. I also built qemu-kvm-0.12.2 using above kernel headers etc. I enabled virtualization in BIOS. I didn't try to install any guest from CD etc. I made a hard disk image, installed grub on it, copied kernel, initrd onto it. Now when I try to create Vm as below, it crashes with following backtrace. What could be going wrong?
> 
> Also when I try to say "-m 256" malloc (or posix_memalign) fails with ENOMEM. So right now "-m 128", which is default, works. Why is that? I have 4G RAM in my setup and my native linux is using less than 1G. Is there some rlimits for qemu that I need to raise?
> 
> Sounds like I'm doing some basic stuff wrong. I'm using bios, vapic, pxe-rtl bin straight from the qemu-kvm dir.
> 
> If I don't do '-nographic' its running into some malloc failure inside some vga routine. I pasted that backtrace too below.
> 
What's your Linux distribution? First trace bellow shows that ptheard_create()
failed which is strange. What ulimit -a shows?


> Appreciate your help.
> thanks
> 
> qemu-system-x86_64 -hda /dev/shm/vmhd.img -bios ./bios.bin --option-rom ./vapic.bin -curses -nographic -vga none -option-rom ./pxe-rtl8139.bin
> 
> #0 0x414875a6 in raise () from /lib/libc.so.6
> (gdb) bt
> #0 0x414875a6 in raise () from /lib/libc.so.6
> #1 0x4148ad18 in abort () from /lib/libc.so.6
> #2 0x080b4cb3 in die2 (err=<value optimized out>,
> what=0x81f2662 "pthread_create") at posix-aio-compat.c:80
> #3 0x080b5682 in thread_create (arg=<value optimized out>,
> start_routine=<value optimized out>, attr=<value optimized out>,
> thread=<value optimized out>) at posix-aio-compat.c:118
> #4 spawn_thread () at posix-aio-compat.c:379
> #5 qemu_paio_submit (aiocb=0x846b550) at posix-aio-compat.c:390
> #6 0x080b57cb in paio_submit (bs=0x843c008, fd=5, sector_num=0,
> qiov=0x84cefb8, nb_sectors=512, cb=0x81cb950 <dma_bdrv_cb>,
> opaque=0x84cef80, type=1) at posix-aio-compat.c:584
> #7 0x080cc7b8 in raw_aio_submit (type=<value optimized out>,
> opaque=<value optimized out>, cb=<value optimized out>,
> nb_sectors=<value optimized out>, qiov=<value optimized out>,
> sector_num=<value optimized out>, bs=<value optimized out>)
> at block/raw-posix.c:562
> #8 raw_aio_readv (bs=0x843c008, sector_num=0, qiov=0x84cefb8, nb_sectors=1,
> cb=0x81cb950 <dma_bdrv_cb>, opaque=0x84cef80) at block/raw-posix.c:570
> #9 0x080b0593 in bdrv_aio_readv (bs=0x843c008, sector_num=0, qiov=0x84cefb8,
> nb_sectors=1, cb=0x81cb950 <dma_bdrv_cb>, opaque=0x84cef80)
> at block.c:1548
> #10 0x081cbb26 in dma_bdrv_cb (opaque=0x84cef80, ret=0)
> at /ws/pkoya-sjc/temp/qemu-kvm-0.12.2/dma-helpers.c:123
> #11 0x081cbcde in dma_bdrv_io (bs=0x843c008, sg=0x846861c, sector_num=0,
> cb=0x8074320 <ide_read_dma_cb>, opaque=0x8468f1c, is_write=0)
> at /ws/pkoya-sjc/temp/qemu-kvm-0.12.2/dma-helpers.c:167
> #12 0x0807441b in ide_read_dma_cb (opaque=0x8468f1c, ret=0)
> at /ws/pkoya-sjc/temp/qemu-kvm-0.12.2/hw/ide/core.c:597
> #13 0x080760ec in bmdma_cmd_writeb (opaque=0x8468f1c, addr=49152, val=9)
> at /ws/pkoya-sjc/temp/qemu-kvm-0.12.2/hw/ide/pci.c:51
> #14 0x080d9d5f in ioport_write (data=<value optimized out>,
> address=<value optimized out>, index=<value optimized out>) at ioport.c:80
> #15 cpu_outb (addr=6587, val=<value optimized out>) at ioport.c:198
> #16 0xb60a3bc9 in ?? ()
> #17 0x0000c000 in ?? ()
> #18 0x00000009 in ?? ()
> #19 0x00000000 in ?? ()
> (gdb) q
> 
> backtrace without "-nographic"
> ============================
> (gdb) bt
> #0 0x414875a6 in raise () from /lib/libc.so.6
> #1 0x4148ad18 in abort () from /lib/libc.so.6
> #2 0x080b4c3c in qemu_memalign (alignment=4096, size=16777216) at osdep.c:96
> #3 0x080b4c5a in qemu_vmalloc (size=16777216) at osdep.c:110
> #4 0x08119995 in qemu_ram_alloc (size=16777216)
> at /devel/temp/qemu-kvm-0.12.2/exec.c:2550
> #5 0x0807ffd0 in vga_common_init (s=0x84be7e4, vga_ram_size=16777216)
> at /devel/temp/qemu-kvm-0.12.2/hw/vga.c:2291
> #6 0x080a1c4b in pci_cirrus_vga_initfn (dev=0x84be618)
> at /devel/temp/qemu-kvm-0.12.2/hw/cirrus_vga.c:3209
> #7 0x0805e61e in pci_qdev_init (qdev=0x84be618, base=0x8229700)
> at /devel/temp/qemu-kvm-0.12.2/hw/pci.c:1482
> #8 0x080fa7ee in qdev_init (dev=0x84be618)
> at /devel/temp/qemu-kvm-0.12.2/hw/qdev.c:242
> #9 0x080fa885 in qdev_init_nofail (dev=0x84be618)
> at /devel/temp/qemu-kvm-0.12.2/hw/qdev.c:285
> #10 0x0805d8ca in pci_create_simple (bus=0x845ab58, devfn=-1,
> name=0x81ce0f8 "cirrus-vga")
> at /devel/temp/qemu-kvm-0.12.2/hw/pci.c:1533
> #11 0x080a2c71 in pci_cirrus_vga_init (bus=0x845ab58)
> at /devel/temp/qemu-kvm-0.12.2/hw/cirrus_vga.c:3235
> #12 0x0808abc3 in pc_init1 (ram_size=<value optimized out>,
> boot_device=0xbf9fea17 "cad", kernel_filename=0x0,
> kernel_cmdline=0x81f82f8 "", initrd_filename=0x0,
> cpu_model=0x81eca10 "qemu64", pci_enabled=1)
> at /devel/temp/qemu-kvm-0.12.2/hw/pc.c:1149
> #13 0x080518db in main (argc=8, argv=0xbf9feaf4, envp=Cannot access memory at address 0x7730
> )
> at /devel/temp/qemu-kvm-0.12.2/vl.c:6055
> (gdb) q
> 

--
			Gleb.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux