Add the minimal amount of code possible in order to launch a first
test, which just prints "Hello, world" using the expected UART
address of the QEMU virt machine. Add files, stubs, and some support,
such as barriers and MMIO read/write along the way in order to
satisfy the compiler. Basically everything is either copied from
the arm64 port of kvm-unit-tests, or at least inspired by it, and,
in that case, the RISC-V Linux kernel code was copied.
Run with
qemu-system-riscv64 -nographic -M virt -kernel riscv/selftest.flat
and then go to the monitor (ctrl-a c) and use 'q' to quit, since
the unit test will just hang after printing hello world and the
exit code.
Signed-off-by: Andrew Jones <andrew.jones@xxxxxxxxx>
---
configure | 14 ++++++
lib/riscv/.gitignore | 1 +
lib/riscv/asm-offsets.c | 6 +++
lib/riscv/asm/asm-offsets.h | 1 +
lib/riscv/asm/barrier.h | 13 ++++++
lib/riscv/asm/csr.h | 7 +++
lib/riscv/asm/io.h | 78 +++++++++++++++++++++++++++++++
lib/riscv/asm/page.h | 7 +++
lib/riscv/asm/setup.h | 7 +++
lib/riscv/asm/spinlock.h | 7 +++
lib/riscv/asm/stack.h | 9 ++++
lib/riscv/io.c | 44 ++++++++++++++++++
lib/riscv/setup.c | 12 +++++
riscv/Makefile | 83 +++++++++++++++++++++++++++++++++
riscv/cstart.S | 92 +++++++++++++++++++++++++++++++++++++
riscv/flat.lds | 75 ++++++++++++++++++++++++++++++
riscv/selftest.c | 13 ++++++
17 files changed, 469 insertions(+)
create mode 100644 lib/riscv/.gitignore
create mode 100644 lib/riscv/asm-offsets.c
create mode 100644 lib/riscv/asm/asm-offsets.h
create mode 100644 lib/riscv/asm/barrier.h
create mode 100644 lib/riscv/asm/csr.h
create mode 100644 lib/riscv/asm/io.h
create mode 100644 lib/riscv/asm/page.h
create mode 100644 lib/riscv/asm/setup.h
create mode 100644 lib/riscv/asm/spinlock.h
create mode 100644 lib/riscv/asm/stack.h
create mode 100644 lib/riscv/io.c
create mode 100644 lib/riscv/setup.c
create mode 100644 riscv/Makefile
create mode 100644 riscv/cstart.S
create mode 100644 riscv/flat.lds
create mode 100644 riscv/selftest.c
diff --git a/configure b/configure
index ada6512702a1..05e6702eab06 100755
--- a/configure
+++ b/configure
@@ -200,6 +200,11 @@ arch_name=$arch
[ "$arch_name" = "arm64" ] && arch_name="aarch64"
arch_libdir=$arch
+if [ "$arch" = "riscv" ]; then
+ echo "riscv32 or riscv64 must be specified"
+ exit 1
+fi
+
if [ -z "$target" ]; then
target="qemu"
else
@@ -307,6 +312,9 @@ elif [ "$arch" = "ppc64" ]; then
echo "You must provide endianness (big or little)!"
usage
fi
+elif [ "$arch" = "riscv32" ] || [ "$arch" = "riscv64" ]; then
+ testdir=riscv
+ arch_libdir=riscv
else
testdir=$arch
fi
@@ -438,6 +446,12 @@ cat <<EOF >> lib/config.h
#define CONFIG_ERRATA_FORCE ${errata_force}
#define CONFIG_PAGE_SIZE _AC(${page_size}, UL)
+EOF
+elif [ "$arch" = "riscv32" ] || [ "$arch" = "riscv64" ]; then
+cat <<EOF >> lib/config.h
+
+#define CONFIG_UART_EARLY_BASE 0x10000000
+
EOF
fi
echo "#endif" >> lib/config.h
diff --git a/lib/riscv/.gitignore b/lib/riscv/.gitignore
new file mode 100644
index 000000000000..82da12e6bd4e
--- /dev/null
+++ b/lib/riscv/.gitignore
@@ -0,0 +1 @@
+/asm-offsets.[hs]
diff --git a/lib/riscv/asm-offsets.c b/lib/riscv/asm-offsets.c
new file mode 100644
index 000000000000..4a74df9e4a09
--- /dev/null
+++ b/lib/riscv/asm-offsets.c
@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+int main(void)
+{
+ return 0;
+}
diff --git a/lib/riscv/asm/asm-offsets.h b/lib/riscv/asm/asm-offsets.h
new file mode 100644
index 000000000000..d370ee36a182
--- /dev/null
+++ b/lib/riscv/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/lib/riscv/asm/barrier.h b/lib/riscv/asm/barrier.h
new file mode 100644
index 000000000000..c6a09066b2c7
--- /dev/null
+++ b/lib/riscv/asm/barrier.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASMRISCV_BARRIER_H_
+#define _ASMRISCV_BARRIER_H_
+
+#define RISCV_FENCE(p, s) \
+ __asm__ __volatile__ ("fence " #p "," #s : : : "memory")
+
+/* These barriers need to enforce ordering on both devices or memory. */
+#define mb() RISCV_FENCE(iorw,iorw)
+#define rmb() RISCV_FENCE(ir,ir)
+#define wmb() RISCV_FENCE(ow,ow)
+
+#endif /* _ASMRISCV_BARRIER_H_ */
diff --git a/lib/riscv/asm/csr.h b/lib/riscv/asm/csr.h
new file mode 100644
index 000000000000..5c4f2de34f64
--- /dev/null
+++ b/lib/riscv/asm/csr.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASMRISCV_CSR_H_
+#define _ASMRISCV_CSR_H_
+
+#define CSR_SSCRATCH 0x140
+
+#endif /* _ASMRISCV_CSR_H_ */
diff --git a/lib/riscv/asm/io.h b/lib/riscv/asm/io.h
new file mode 100644
index 000000000000..d2eb3acc9fda
--- /dev/null
+++ b/lib/riscv/asm/io.h
@@ -0,0 +1,78 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * From Linux arch/riscv/include/asm/mmio.h
+ */
+#ifndef _ASMRISCV_IO_H_
+#define _ASMRISCV_IO_H_
+#include <libcflat.h>
+
+#define __iomem
+
+/* Generic IO read/write. These perform native-endian accesses. */
+#define __raw_writeb __raw_writeb
+static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
+{
+ asm volatile("sb %0, 0(%1)" : : "r" (val), "r" (addr));
+}
+
+#define __raw_writew __raw_writew
+static inline void __raw_writew(u16 val, volatile void __iomem *addr)
+{
+ asm volatile("sh %0, 0(%1)" : : "r" (val), "r" (addr));
+}
+
+#define __raw_writel __raw_writel
+static inline void __raw_writel(u32 val, volatile void __iomem *addr)
+{
+ asm volatile("sw %0, 0(%1)" : : "r" (val), "r" (addr));
+}
+
+#ifdef CONFIG_64BIT
+#define __raw_writeq __raw_writeq
+static inline void __raw_writeq(u64 val, volatile void __iomem *addr)
+{
+ asm volatile("sd %0, 0(%1)" : : "r" (val), "r" (addr));
+}
+#endif
+
+#define __raw_readb __raw_readb
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+ u8 val;
+
+ asm volatile("lb %0, 0(%1)" : "=r" (val) : "r" (addr));
+ return val;
+}
+
+#define __raw_readw __raw_readw
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+ u16 val;
+
+ asm volatile("lh %0, 0(%1)" : "=r" (val) : "r" (addr));
+ return val;
+}
+
+#define __raw_readl __raw_readl
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+ u32 val;
+
+ asm volatile("lw %0, 0(%1)" : "=r" (val) : "r" (addr));
+ return val;
+}
+
+#ifdef CONFIG_64BIT
+#define __raw_readq __raw_readq
+static inline u64 __raw_readq(const volatile void __iomem *addr)
+{
+ u64 val;
+
+ asm volatile("ld %0, 0(%1)" : "=r" (val) : "r" (addr));
+ return val;
+}
+#endif
+
+#include <asm-generic/io.h>
+
+#endif /* _ASMRISCV_IO_H_ */
diff --git a/lib/riscv/asm/page.h b/lib/riscv/asm/page.h
new file mode 100644
index 000000000000..7d7c9191605a
--- /dev/null
+++ b/lib/riscv/asm/page.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASMRISCV_PAGE_H_
+#define _ASMRISCV_PAGE_H_
+
+#include <asm-generic/page.h>
+
+#endif /* _ASMRISCV_PAGE_H_ */
diff --git a/lib/riscv/asm/setup.h b/lib/riscv/asm/setup.h
new file mode 100644
index 000000000000..385455f341cc
--- /dev/null
+++ b/lib/riscv/asm/setup.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASMRISCV_SETUP_H_
+#define _ASMRISCV_SETUP_H_
+
+void setup(const void *fdt, phys_addr_t freemem_start);
+
+#endif /* _ASMRISCV_SETUP_H_ */
diff --git a/lib/riscv/asm/spinlock.h b/lib/riscv/asm/spinlock.h
new file mode 100644
index 000000000000..6e2b3009abf3
--- /dev/null
+++ b/lib/riscv/asm/spinlock.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASMRISCV_SPINLOCK_H_
+#define _ASMRISCV_SPINLOCK_H_
+
+#include <asm-generic/spinlock.h>
+
+#endif /* _ASMRISCV_SPINLOCK_H_ */
diff --git a/lib/riscv/asm/stack.h b/lib/riscv/asm/stack.h
new file mode 100644
index 000000000000..d081d0716d7b
--- /dev/null
+++ b/lib/riscv/asm/stack.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASMRISCV_STACK_H_
+#define _ASMRISCV_STACK_H_
+
+#ifndef _STACK_H_
+#error Do not directly include <asm/stack.h>. Just use <stack.h>.
+#endif
+
+#endif
diff --git a/lib/riscv/io.c b/lib/riscv/io.c
new file mode 100644
index 000000000000..3cfc235d19a6
--- /dev/null
+++ b/lib/riscv/io.c
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Each architecture must implement puts() and exit() with the I/O
+ * devices exposed from QEMU, e.g. ns16550a.
+ *
+ * Copyright (C) 2023, Ventana Micro Systems Inc., Andrew Jones <ajones@xxxxxxxxxxxxxxxx>
+ */
+#include <libcflat.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/spinlock.h>
+
+/*
+ * Use this guess for the uart base in order to make an attempt at
+ * having earlier printf support. We'll overwrite it with the real
+ * base address that we read from the device tree later. This is
+ * the address we expect the virtual machine manager to put in
+ * its generated device tree.
+ */
+#define UART_EARLY_BASE ((u8 *)(unsigned long)CONFIG_UART_EARLY_BASE)
+static volatile u8 *uart0_base = UART_EARLY_BASE;
+static struct spinlock uart_lock;
+
+void puts(const char *s)
+{
+ spin_lock(&uart_lock);
+ while (*s)
+ writeb(*s++, uart0_base);
+ spin_unlock(&uart_lock);
+}
+
+/*
+ * Defining halt to take 'code' as an argument guarantees that it will
+ * be in a0 when we halt. That gives us a final chance to see the exit
+ * status while inspecting the halted unit test state.
+ */
+void halt(int code);
+
+void exit(int code)
+{
+ printf("\nEXIT: STATUS=%d\n", ((code) << 1) | 1);
+ halt(code);
+ __builtin_unreachable();
+}
diff --git a/lib/riscv/setup.c b/lib/riscv/setup.c
new file mode 100644
index 000000000000..8937525ccb7f
--- /dev/null
+++ b/lib/riscv/setup.c
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Initialize machine setup information and I/O.
+ *
+ * Copyright (C) 2023, Ventana Micro Systems Inc., Andrew Jones <ajones@xxxxxxxxxxxxxxxx>
+ */
+#include <libcflat.h>
+#include <asm/setup.h>
+
+void setup(const void *fdt, phys_addr_t freemem_start)
+{
+}
diff --git a/riscv/Makefile b/riscv/Makefile
new file mode 100644
index 000000000000..f2e89f0e4c38
--- /dev/null
+++ b/riscv/Makefile
@@ -0,0 +1,83 @@
+#
+# riscv makefile
+#
+# Authors: Andrew Jones <ajones@xxxxxxxxxxxxxxxx>
+#
+
+ifeq ($(CONFIG_EFI),y)
+exe = efi
+else
+exe = flat
+endif
+
+tests =
+tests += $(TEST_DIR)/selftest.$(exe)
+#tests += $(TEST_DIR)/sieve.$(exe)
+
+all: $(tests)
+
+$(TEST_DIR)/sieve.elf: AUXFLAGS = 0x1
+
+cstart.o = $(TEST_DIR)/cstart.o
+
+cflatobjs += lib/riscv/io.o
+cflatobjs += lib/riscv/setup.o
+
+########################################
+
+OBJDIRS += lib/riscv
+FLATLIBS = $(libcflat) $(LIBFDT_archive)
+
+AUXFLAGS ?= 0x0
+
+# stack.o relies on frame pointers.
+KEEP_FRAME_POINTER := y
+
+# We want to keep intermediate files
+.PRECIOUS: %.elf %.o
+
+define arch_elf_check =
+ $(if $(shell ! $(READELF) -rW $(1) >&/dev/null && echo "nok"),
+ $(error $(shell $(READELF) -rW $(1) 2>&1)))
+ $(if $(shell $(READELF) -rW $(1) | grep R_ | grep -v R_RISCV_RELATIVE),
+ $(error $(1) has unsupported reloc types))
+endef
+
+ifeq ($(ARCH),riscv64)
+CFLAGS += -DCONFIG_64BIT
+endif
+CFLAGS += -DCONFIG_RELOC
+CFLAGS += -mcmodel=medany
+CFLAGS += -mstrict-align
+CFLAGS += -std=gnu99
+CFLAGS += -ffreestanding
+CFLAGS += -O2
+CFLAGS += -I $(SRCDIR)/lib -I $(SRCDIR)/lib/libfdt
+
+asm-offsets = lib/riscv/asm-offsets.h
+include $(SRCDIR)/scripts/asm-offsets.mak
+
+ifeq ($(CONFIG_EFI),y)
+ # TODO
+else
+%.elf: LDFLAGS += -pie -n -z notext
+%.elf: %.o $(FLATLIBS) $(SRCDIR)/riscv/flat.lds $(cstart.o)
+ $(CC) $(CFLAGS) -c -o $(@:.elf=.aux.o) $(SRCDIR)/lib/auxinfo.c \
+ -DPROGNAME=\"$(notdir $(@:.elf=.flat))\" -DAUXFLAGS=$(AUXFLAGS)
+ $(LD) $(LDFLAGS) -o $@ -T $(SRCDIR)/riscv/flat.lds \
+ $(filter %.o, $^) $(FLATLIBS) $(@:.elf=.aux.o)
+ $(RM) $(@:.elf=.aux.o)
+ @chmod a-x $@
+
+%.flat: %.elf
+ $(call arch_elf_check, $^)
+ $(OBJCOPY) -O binary $^ $@
+ @chmod a-x $@
+endif
+
+generated-files = $(asm-offsets)
+$(tests:.$(exe)=.o) $(cstart.o) $(cflatobjs): $(generated-files)
+
+arch_clean: asm_offsets_clean
+ $(RM) $(TEST_DIR)/*.{o,flat,elf,so,efi,debug} \
+ $(TEST_DIR)/.*.d $(TEST_DIR)/efi/.*.d lib/riscv/.*.d
diff --git a/riscv/cstart.S b/riscv/cstart.S
new file mode 100644
index 000000000000..a28d75e8021e
--- /dev/null
+++ b/riscv/cstart.S
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Boot entry point and assembler functions for riscv.
+ *
+ * Copyright (C) 2023, Ventana Micro Systems Inc., Andrew Jones <ajones@xxxxxxxxxxxxxxxx>
+ */
+#include <asm/csr.h>
+
+.macro zero_range, tmp1, tmp2
+9998: beq \tmp1, \tmp2, 9997f
+ sd zero, 0(\tmp1)
+ addi \tmp1, \tmp1, 8
+ j 9998b
+9997:
+.endm
+
+ .section .init
+
+/*
+ * The hartid of the current core is in a0
+ * The address of the devicetree is in a1
+ *
+ * See Linux kernel doc Documentation/riscv/boot.rst
+ */
+.global start
+start:
+ /*
+ * Stash the hartid in scratch and shift the dtb
+ * address into a0
+ */
+ csrw CSR_SSCRATCH, a0
+ mv a0, a1
+
+ /*
+ * Update all R_RISCV_RELATIVE relocations using the table
+ * of Elf64_Rela entries between reloc_start/end. The build
+ * will not emit other relocation types.
+ *
+ * struct Elf64_Rela {
+ * uint64_t r_offset;
+ * uint64_t r_info;
+ * int64_t r_addend;
+ * }
+ */
+ la a1, reloc_start
+ la a2, reloc_end
+ la a3, start // base
+1:
+ bge a1, a2, 1f
+ ld a4, 0(a1) // r_offset
+ ld a5, 16(a1) // r_addend
+ add a4, a3, a4 // addr = base + r_offset
+ add a5, a3, a5 // val = base + r_addend
+ sd a5, 0(a4) // *addr = val
+ addi a1, a1, 24
+ j 1b
+
+1:
+ /* zero BSS */
+ la a1, bss
+ la a2, ebss
+ zero_range a1, a2
+
+ /* zero and set up stack */
+ la sp, stacktop
+ li a1, -8192
+ add a1, sp, a1
+ zero_range a1, sp
+
+ /* set up exception handling */
+ //TODO
+
+ /* complete setup */
+ la a1, stacktop // a1 is the base of free memory
+ call setup // a0 is the addr of the dtb
+
+ /* run the test */
+ la a0, __argc
+ ld a0, 0(a0)
+ la a1, __argv
+ la a2, __environ
+ call main
+ call exit
+ j halt
+
+ .text
+
+.balign 4
+.global halt
+halt:
+1: wfi
+ j 1b
diff --git a/riscv/flat.lds b/riscv/flat.lds
new file mode 100644
index 000000000000..d4853f82ba1c
--- /dev/null
+++ b/riscv/flat.lds
@@ -0,0 +1,75 @@
+/*
+ * init::start will pass stacktop to setup() as the base of free memory.
+ * setup() will then move the FDT and initrd to that base before calling
+ * mem_init(). With those movements and this linker script, we'll end up
+ * having the following memory layout:
+ *
+ * +----------------------+ <-- top of physical memory
+ * | |
+ * ~ ~
+ * | |
+ * +----------------------+ <-- top of initrd
+ * | |
+ * +----------------------+ <-- top of FDT
+ * | |
+ * +----------------------+ <-- top of cpu0's stack
+ * | |
+ * +----------------------+ <-- top of text/data/bss sections
+ * | |
+ * | |
+ * +----------------------+ <-- load address
+ * | |
+ * +----------------------+ <-- physical address 0x0
+ */
+
+PHDRS
+{
+ text PT_LOAD FLAGS(5);
+ data PT_LOAD FLAGS(6);
+}
+
+SECTIONS
+{
+ PROVIDE(_text = .);
+ .text : { *(.init) *(.text) *(.text.*) } :text
+ . = ALIGN(4K);
+ PROVIDE(_etext = .);
+
+ PROVIDE(reloc_start = .);
+ .rela.dyn : { *(.rela.dyn) }
+ PROVIDE(reloc_end = .);
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .hash : { *(.hash) }
+ .gnu.hash : { *(.gnu.hash) }
+ .got : { *(.got) *(.got.plt) }
+ .eh_frame : { *(.eh_frame) }
+
+ .rodata : { *(.rodata*) } :data
+ .data : { *(.data) } :data
+ . = ALIGN(16);
+ PROVIDE(bss = .);
+ .bss : { *(.bss) }
+ . = ALIGN(16);
+ PROVIDE(ebss = .);
+ . = ALIGN(4K);
+ PROVIDE(edata = .);
+
+ /*
+ * stack depth is 8K and sp must be 16 byte aligned
+ * sp must always be strictly less than the true stacktop
+ */
+ . += 12K;
+ . = ALIGN(4K);
+ PROVIDE(stackptr = . - 16);
+ PROVIDE(stacktop = .);
+
+ /DISCARD/ : {
+ *(.note*)
+ *(.interp)
+ *(.comment)
+ *(.dynamic)
+ }
+}
+
+ENTRY(start)
diff --git a/riscv/selftest.c b/riscv/selftest.c
new file mode 100644
index 000000000000..88afa732649e
--- /dev/null
+++ b/riscv/selftest.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Test the framework itself. These tests confirm that setup works.
+ *
+ * Copyright (C) 2023, Ventana Micro Systems Inc., Andrew Jones <ajones@xxxxxxxxxxxxxxxx>
+ */
+#include <libcflat.h>
+
+int main(void)
+{
+ puts("Hello, world\n");
+ return 0;
+}
--
2.43.0
