On Sun, Jan 14, 2024 at 09:49:18PM +0800, Xiaoyao Li wrote: > Date: Sun, 14 Jan 2024 21:49:18 +0800 > From: Xiaoyao Li <xiaoyao.li@xxxxxxxxx> > Subject: Re: [PATCH v7 10/16] i386/cpu: Introduce cluster-id to X86CPU > > On 1/8/2024 4:27 PM, Zhao Liu wrote: > > From: Zhuocheng Ding <zhuocheng.ding@xxxxxxxxx> > > > > Introduce cluster-id other than module-id to be consistent with > > CpuInstanceProperties.cluster-id, and this avoids the confusion > > of parameter names when hotplugging. > > I don't think reusing 'cluster' from arm for x86's 'module' is a good idea. > It introduces confusion around the code. There is a precedent: generic "socket" v.s. i386 "package". The direct definition of cluster is the level that is above the "core" and shares the hardware resources including L2. In this sense, arm's cluster is the same as x86's module. Though different arches have different naming styles, but QEMU's generic code still need the uniform topology hierarchy. > > s390 just added 'drawer' and 'book' in cpu topology[1]. I think we can also > add a module level for x86 instead of reusing cluster. > > (This is also what I want to reply to the cover letter.) > > [1] https://lore.kernel.org/qemu-devel/20231016183925.2384704-1-nsg@xxxxxxxxxxxxx/ These two new levels have the clear topological hierarchy relationship and don't duplicate existing ones. "book" or "drawer" may correspond to intel's "cluster". Maybe, in the future, we could support for arch-specific alias topologies in -smp. Thanks, Zhao > > > Following the legacy smp check rules, also add the cluster_id validity > > into x86_cpu_pre_plug(). > > > > Signed-off-by: Zhuocheng Ding <zhuocheng.ding@xxxxxxxxx> > > Co-developed-by: Zhao Liu <zhao1.liu@xxxxxxxxx> > > Signed-off-by: Zhao Liu <zhao1.liu@xxxxxxxxx> > > Tested-by: Babu Moger <babu.moger@xxxxxxx> > > Tested-by: Yongwei Ma <yongwei.ma@xxxxxxxxx> > > Acked-by: Michael S. Tsirkin <mst@xxxxxxxxxx> > > --- > > Changes since v6: > > * Update the comment when check cluster-id. Since there's no > > v8.2, the cluster-id support should at least start from v9.0. > > > > Changes since v5: > > * Update the comment when check cluster-id. Since current QEMU is > > v8.2, the cluster-id support should at least start from v8.3. > > > > Changes since v3: > > * Use the imperative in the commit message. (Babu) > > --- > > hw/i386/x86.c | 33 +++++++++++++++++++++++++-------- > > target/i386/cpu.c | 2 ++ > > target/i386/cpu.h | 1 + > > 3 files changed, 28 insertions(+), 8 deletions(-) > > > > diff --git a/hw/i386/x86.c b/hw/i386/x86.c > > index 5269aae3a5c2..1c1d368614ee 100644 > > --- a/hw/i386/x86.c > > +++ b/hw/i386/x86.c > > @@ -329,6 +329,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, > > cpu->die_id = 0; > > } > > + /* > > + * cluster-id was optional in QEMU 9.0 and older, so keep it optional > > + * if there's only one cluster per die. > > + */ > > + if (cpu->cluster_id < 0 && ms->smp.clusters == 1) { > > + cpu->cluster_id = 0; > > + } > > + > > if (cpu->socket_id < 0) { > > error_setg(errp, "CPU socket-id is not set"); > > return; > > @@ -345,6 +353,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, > > cpu->die_id, ms->smp.dies - 1); > > return; > > } > > + if (cpu->cluster_id < 0) { > > + error_setg(errp, "CPU cluster-id is not set"); > > + return; > > + } else if (cpu->cluster_id > ms->smp.clusters - 1) { > > + error_setg(errp, "Invalid CPU cluster-id: %u must be in range 0:%u", > > + cpu->cluster_id, ms->smp.clusters - 1); > > + return; > > + } > > if (cpu->core_id < 0) { > > error_setg(errp, "CPU core-id is not set"); > > return; > > @@ -364,16 +380,9 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, > > topo_ids.pkg_id = cpu->socket_id; > > topo_ids.die_id = cpu->die_id; > > + topo_ids.module_id = cpu->cluster_id; > > topo_ids.core_id = cpu->core_id; > > topo_ids.smt_id = cpu->thread_id; > > - > > - /* > > - * TODO: This is the temporary initialization for topo_ids.module_id to > > - * avoid "maybe-uninitialized" compilation errors. Will remove when > > - * X86CPU supports cluster_id. > > - */ > > - topo_ids.module_id = 0; > > - > > cpu->apic_id = x86_apicid_from_topo_ids(&topo_info, &topo_ids); > > } > > @@ -418,6 +427,14 @@ void x86_cpu_pre_plug(HotplugHandler *hotplug_dev, > > } > > cpu->die_id = topo_ids.die_id; > > + if (cpu->cluster_id != -1 && cpu->cluster_id != topo_ids.module_id) { > > + error_setg(errp, "property cluster-id: %u doesn't match set apic-id:" > > + " 0x%x (cluster-id: %u)", cpu->cluster_id, cpu->apic_id, > > + topo_ids.module_id); > > + return; > > + } > > + cpu->cluster_id = topo_ids.module_id; > > + > > if (cpu->core_id != -1 && cpu->core_id != topo_ids.core_id) { > > error_setg(errp, "property core-id: %u doesn't match set apic-id:" > > " 0x%x (core-id: %u)", cpu->core_id, cpu->apic_id, > > diff --git a/target/i386/cpu.c b/target/i386/cpu.c > > index a2d39d2198b6..498a4be62b40 100644 > > --- a/target/i386/cpu.c > > +++ b/target/i386/cpu.c > > @@ -7909,12 +7909,14 @@ static Property x86_cpu_properties[] = { > > DEFINE_PROP_UINT32("apic-id", X86CPU, apic_id, 0), > > DEFINE_PROP_INT32("thread-id", X86CPU, thread_id, 0), > > DEFINE_PROP_INT32("core-id", X86CPU, core_id, 0), > > + DEFINE_PROP_INT32("cluster-id", X86CPU, cluster_id, 0), > > DEFINE_PROP_INT32("die-id", X86CPU, die_id, 0), > > DEFINE_PROP_INT32("socket-id", X86CPU, socket_id, 0), > > #else > > DEFINE_PROP_UINT32("apic-id", X86CPU, apic_id, UNASSIGNED_APIC_ID), > > DEFINE_PROP_INT32("thread-id", X86CPU, thread_id, -1), > > DEFINE_PROP_INT32("core-id", X86CPU, core_id, -1), > > + DEFINE_PROP_INT32("cluster-id", X86CPU, cluster_id, -1), > > DEFINE_PROP_INT32("die-id", X86CPU, die_id, -1), > > DEFINE_PROP_INT32("socket-id", X86CPU, socket_id, -1), > > #endif > > diff --git a/target/i386/cpu.h b/target/i386/cpu.h > > index 97b290e10576..009950b87203 100644 > > --- a/target/i386/cpu.h > > +++ b/target/i386/cpu.h > > @@ -2057,6 +2057,7 @@ struct ArchCPU { > > int32_t node_id; /* NUMA node this CPU belongs to */ > > int32_t socket_id; > > int32_t die_id; > > + int32_t cluster_id; > > int32_t core_id; > > int32_t thread_id; >
