Re: [PATCH v7 04/26] x86/fpu/xstate: Introduce XFEATURE_MASK_KERNEL_DYNAMIC xfeature set

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2023-12-01 at 15:49 +0800, Yang, Weijiang wrote:
> On 12/1/2023 1:33 AM, Maxim Levitsky wrote:
> > On Fri, 2023-11-24 at 00:53 -0500, Yang Weijiang wrote:
> > > Define new XFEATURE_MASK_KERNEL_DYNAMIC set including the features can be
> > I am not sure though that this name is correct, but I don't know if I can
> > suggest a better name.
> 
> It's a symmetry of XFEATURE_MASK_USER_DYNAMIC ;-)
> > > optionally enabled by kernel components, i.e., the features are required by
> > > specific kernel components. Currently it's used by KVM to configure guest
> > > dedicated fpstate for calculating the xfeature and fpstate storage size etc.
> > > 
> > > The kernel dynamic xfeatures now only contain XFEATURE_CET_KERNEL, which is
> > > supported by host as they're enabled in xsaves/xrstors operating xfeature set
> > > (XCR0 | XSS), but the relevant CPU feature, i.e., supervisor shadow stack, is
> > > not enabled in host kernel so it can be omitted for normal fpstate by default.
> > > 
> > > Remove the kernel dynamic feature from fpu_kernel_cfg.default_features so that
> > > the bits in xstate_bv and xcomp_bv are cleared and xsaves/xrstors can be
> > > optimized by HW for normal fpstate.
> > > 
> > > Suggested-by: Dave Hansen <dave.hansen@xxxxxxxxx>
> > > Signed-off-by: Yang Weijiang <weijiang.yang@xxxxxxxxx>
> > > ---
> > >   arch/x86/include/asm/fpu/xstate.h | 5 ++++-
> > >   arch/x86/kernel/fpu/xstate.c      | 1 +
> > >   2 files changed, 5 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/arch/x86/include/asm/fpu/xstate.h b/arch/x86/include/asm/fpu/xstate.h
> > > index 3b4a038d3c57..a212d3851429 100644
> > > --- a/arch/x86/include/asm/fpu/xstate.h
> > > +++ b/arch/x86/include/asm/fpu/xstate.h
> > > @@ -46,9 +46,12 @@
> > >   #define XFEATURE_MASK_USER_RESTORE	\
> > >   	(XFEATURE_MASK_USER_SUPPORTED & ~XFEATURE_MASK_PKRU)
> > >   
> > > -/* Features which are dynamically enabled for a process on request */
> > > +/* Features which are dynamically enabled per userspace request */
> > >   #define XFEATURE_MASK_USER_DYNAMIC	XFEATURE_MASK_XTILE_DATA
> > >   
> > > +/* Features which are dynamically enabled per kernel side request */
> > I suggest to explain this a bit better. How about something like that:
> > 
> > "Kernel features that are not enabled by default for all processes, but can
> > be still used by some processes, for example to support guest virtualization"
> 
> It looks good to me, will apply it in next version, thanks!
> 
> > But feel free to keep it as is or propose something else. IMHO this will
> > be confusing this way or another.
> > 
> > 
> > Another question: kernel already has a notion of 'independent features'
> > which are currently kernel features that are enabled in IA32_XSS but not present in 'fpu_kernel_cfg.max_features'
> > 
> > Currently only 'XFEATURE_LBR' is in this set. These features are saved/restored manually
> > from independent buffer (in case of LBRs, perf code cares for this).
> > 
> > Does it make sense to add CET_S to there as well instead of having XFEATURE_MASK_KERNEL_DYNAMIC,
> 
> CET_S here refers to PL{0,1,2}_SSP, right?
> 
> IMHO, perf relies on dedicated code to switch LBR MSRs for various reason, e.g., overhead, the feature
> owns dozens of MSRs, remove xfeature bit will offload the burden of common FPU/xsave framework.

This is true, but the question that begs to be asked, is what is the true purpose of the 'independent features' is
from the POV of the kernel FPU framework. IMHO these are features that the framework is not aware of, except
that it enables it in IA32_XSS (and in XCR0 in the future).

For the guest only features, like CET_S, it is also kind of the same thing (xsave but to guest state area only).
I don't insist that we add CET_S to independent features, but I just gave an idea that maybe that is better
from complexity point of view to add CET there. It's up to you to decide.

Sean what do you think?

Best regards,
	Maxim Levitsky


> 
> But CET only has 3 supervisor MSRs and they need to be managed together with user mode MSRs.
> Enabling it in common FPU framework would make the switch/swap much easier without additional
> support code.
> 
> >   and maybe rename the
> > 'XFEATURE_MASK_INDEPENDENT' to something like 'XFEATURES_THE_KERNEL_DOESNT_CARE_ABOUT'
> > (terrible name, but you might think of a better name)
> > 
> > 
> > > +#define XFEATURE_MASK_KERNEL_DYNAMIC	XFEATURE_MASK_CET_KERNEL
> > > +
> > >   /* All currently supported supervisor features */
> > >   #define XFEATURE_MASK_SUPERVISOR_SUPPORTED (XFEATURE_MASK_PASID | \
> > >   					    XFEATURE_MASK_CET_USER | \
> > > diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
> > > index b57d909facca..ba4172172afd 100644
> > > --- a/arch/x86/kernel/fpu/xstate.c
> > > +++ b/arch/x86/kernel/fpu/xstate.c
> > > @@ -824,6 +824,7 @@ void __init fpu__init_system_xstate(unsigned int legacy_size)
> > >   	/* Clean out dynamic features from default */
> > >   	fpu_kernel_cfg.default_features = fpu_kernel_cfg.max_features;
> > >   	fpu_kernel_cfg.default_features &= ~XFEATURE_MASK_USER_DYNAMIC;
> > > +	fpu_kernel_cfg.default_features &= ~XFEATURE_MASK_KERNEL_DYNAMIC;
> > >   
> > >   	fpu_user_cfg.default_features = fpu_user_cfg.max_features;
> > >   	fpu_user_cfg.default_features &= ~XFEATURE_MASK_USER_DYNAMIC;
> > 
> > Best regards,
> > 	Maxim Levitsky
> > 
> > 
> > 
> > 








[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux