On Thu Nov 23, 2023 at 7:36 PM AEST, Zhao Ke wrote: > HeXin Tech Co. has applied for a new PVN from the OpenPower Community > for its new processor C2000. The OpenPower has assigned a new PVN > and this newly assigned PVN is 0x0066, add pvr register related > support for this PVN. > > Signed-off-by: Zhao Ke <ke.zhao@xxxxxxxxxxxx> > Link: https://discuss.openpower.foundation/t/how-to-get-a-new-pvr-for-processors-follow-power-isa/477/10 > --- > v0 -> v1: > - Fix .cpu_name with the correct description > --- > --- > arch/powerpc/include/asm/reg.h | 1 + > arch/powerpc/kernel/cpu_specs_book3s_64.h | 15 +++++++++++++++ > arch/powerpc/kvm/book3s_pr.c | 1 + > arch/powerpc/mm/book3s64/pkeys.c | 3 ++- > arch/powerpc/platforms/powernv/subcore.c | 3 ++- > drivers/misc/cxl/cxl.h | 3 ++- > 6 files changed, 23 insertions(+), 3 deletions(-) > > diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h > index 4ae4ab9090a2..7fd09f25452d 100644 > --- a/arch/powerpc/include/asm/reg.h > +++ b/arch/powerpc/include/asm/reg.h > @@ -1361,6 +1361,7 @@ > #define PVR_POWER8E 0x004B > #define PVR_POWER8NVL 0x004C > #define PVR_POWER8 0x004D > +#define PVR_HX_C2000 0x0066 > #define PVR_POWER9 0x004E > #define PVR_POWER10 0x0080 > #define PVR_BE 0x0070 > diff --git a/arch/powerpc/kernel/cpu_specs_book3s_64.h b/arch/powerpc/kernel/cpu_specs_book3s_64.h > index c370c1b804a9..367c9f6d9be5 100644 > --- a/arch/powerpc/kernel/cpu_specs_book3s_64.h > +++ b/arch/powerpc/kernel/cpu_specs_book3s_64.h > @@ -238,6 +238,21 @@ static struct cpu_spec cpu_specs[] __initdata = { > .machine_check_early = __machine_check_early_realmode_p8, > .platform = "power8", > }, > + { /* 2.07-compliant processor, HeXin C2000 processor */ > + .pvr_mask = 0xffffffff, > + .pvr_value = 0x00660000, > + .cpu_name = "POWER8 (raw)", If this is a raw mode, it should go with the raw POWER8 entry. The raw vs architected entries are already out of order with POWER6, but we should fix that too. You may want your PVR mask to follow the other raw examples too, but it depends on how you foresee PVR being used. Using 0xffff0000 allows you to increment the low part of the PVR and existing kernels will continue to match it. You can then add a specific match for the older version if you need to add special handling for it (e.g., see how POWER9 is handled). Do you want .cpu_name to be "POWER8 (raw)"? You could call it "HX-C2000", as Michael suggested earlier. > + .cpu_features = CPU_FTRS_POWER8, > + .cpu_user_features = COMMON_USER_POWER8, > + .cpu_user_features2 = COMMON_USER2_POWER8, > + .mmu_features = MMU_FTRS_POWER8, > + .icache_bsize = 128, > + .dcache_bsize = 128, > + .cpu_setup = __setup_cpu_power8, > + .cpu_restore = __restore_cpu_power8, > + .machine_check_early = __machine_check_early_realmode_p8, > + .platform = "power8", > + }, > { /* 3.00-compliant processor, i.e. Power9 "architected" mode */ > .pvr_mask = 0xffffffff, > .pvr_value = 0x0f000005, > diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c > index 9118242063fb..5b92619a05fd 100644 > --- a/arch/powerpc/kvm/book3s_pr.c > +++ b/arch/powerpc/kvm/book3s_pr.c > @@ -604,6 +604,7 @@ static void kvmppc_set_pvr_pr(struct kvm_vcpu *vcpu, u32 pvr) > case PVR_POWER8: > case PVR_POWER8E: > case PVR_POWER8NVL: > + case PVR_HX_C2000: > case PVR_POWER9: > vcpu->arch.hflags |= BOOK3S_HFLAG_MULTI_PGSIZE | > BOOK3S_HFLAG_NEW_TLBIE; > diff --git a/arch/powerpc/mm/book3s64/pkeys.c b/arch/powerpc/mm/book3s64/pkeys.c > index 125733962033..c38f378e1942 100644 > --- a/arch/powerpc/mm/book3s64/pkeys.c > +++ b/arch/powerpc/mm/book3s64/pkeys.c > @@ -89,7 +89,8 @@ static int __init scan_pkey_feature(void) > unsigned long pvr = mfspr(SPRN_PVR); > > if (PVR_VER(pvr) == PVR_POWER8 || PVR_VER(pvr) == PVR_POWER8E || > - PVR_VER(pvr) == PVR_POWER8NVL || PVR_VER(pvr) == PVR_POWER9) > + PVR_VER(pvr) == PVR_POWER8NVL || PVR_VER(pvr) == PVR_POWER9 || > + PVR_VER(pvr) == PVR_HX_C2000) > pkeys_total = 32; > } > } > diff --git a/arch/powerpc/platforms/powernv/subcore.c b/arch/powerpc/platforms/powernv/subcore.c > index 191424468f10..58e7331e1e7e 100644 > --- a/arch/powerpc/platforms/powernv/subcore.c > +++ b/arch/powerpc/platforms/powernv/subcore.c > @@ -425,7 +425,8 @@ static int subcore_init(void) > > if (pvr_ver != PVR_POWER8 && > pvr_ver != PVR_POWER8E && > - pvr_ver != PVR_POWER8NVL) > + pvr_ver != PVR_POWER8NVL && > + pvr_ver != PVR_HX_C2000) > return 0; > > /* > diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h > index 0562071cdd4a..9ac2991b29c7 100644 > --- a/drivers/misc/cxl/cxl.h > +++ b/drivers/misc/cxl/cxl.h > @@ -836,7 +836,8 @@ static inline bool cxl_is_power8(void) > { > if ((pvr_version_is(PVR_POWER8E)) || > (pvr_version_is(PVR_POWER8NVL)) || > - (pvr_version_is(PVR_POWER8))) > + (pvr_version_is(PVR_POWER8)) || > + (pvr_version_is(PVR_HX_C2000))) > return true; > return false; > } These should follow the same alignment pattern as the other lines. Thanks, Nick
