Dor Laor wrote:
On 04/21/2010 08:57 AM, Yoshiaki Tamura wrote:
Hi all,
We have been implementing the prototype of Kemari for KVM, and we're
sending
this message to share what we have now and TODO lists. Hopefully, we
would like
to get early feedback to keep us in the right direction. Although
advanced
approaches in the TODO lists are fascinating, we would like to run
this project
step by step while absorbing comments from the community. The current
code is
based on qemu-kvm.git 2b644fd0e737407133c88054ba498e772ce01f27.
For those who are new to Kemari for KVM, please take a look at the
following RFC which we posted last year.
http://www.mail-archive.com/kvm@xxxxxxxxxxxxxxx/msg25022.html
The transmission/transaction protocol, and most of the control logic is
implemented in QEMU. However, we needed a hack in KVM to prevent rip from
proceeding before synchronizing VMs. It may also need some plumbing in
the
kernel side to guarantee replayability of certain events and
instructions,
integrate the RAS capabilities of newer x86 hardware with the HA
stack, as well
as for optimization purposes, for example.
[ snap]
The rest of this message describes TODO lists grouped by each topic.
=== event tapping ===
Event tapping is the core component of Kemari, and it decides on which
event the
primary should synchronize with the secondary. The basic assumption
here is
that outgoing I/O operations are idempotent, which is usually true for
disk I/O
and reliable network protocols such as TCP.
IMO any type of network even should be stalled too. What if the VM runs
non tcp protocol and the packet that the master node sent reached some
remote client and before the sync to the slave the master failed?
In current implementation, it is actually stalling any type of network that goes
through virtio-net.
However, if the application was using unreliable protocols, it should have its
own recovering mechanism, or it should be completely stateless.
[snap]
=== clock ===
Since synchronizing the virtual machines every time the TSC is
accessed would be
prohibitive, the transmission of the TSC will be done lazily, which means
delaying it until there is a non-TSC synchronization point arrives.
Why do you specifically care about the tsc sync? When you sync all the
IO model on snapshot it also synchronizes the tsc.
In general, can you please explain the 'algorithm' for continuous
snapshots (is that what you like to do?):
Yes, of course.
Sorry for being less informative.
A trivial one would we to :
- do X online snapshots/sec
I currently don't have good numbers that I can share right now.
Snapshots/sec depends on what kind of workload is running, and if the guest was
almost idle, there will be no snapshots in 5sec. On the other hand, if the
guest was running I/O intensive workloads (netperf, iozone for example), there
will be about 50 snapshots/sec.
- Stall all IO (disk/block) from the guest to the outside world
until the previous snapshot reaches the slave.
Yes, it does.
- Snapshots are made of
Full device model + diff of dirty pages from the last snapshot.
- diff of dirty pages from last snapshot
This also depends on the workload.
In case of I/O intensive workloads, dirty pages are usually less than 100.
- Qemu device model (+kvm's) diff from last.
We're currently sending full copy because we're completely reusing this part of
existing live migration framework.
Last time we measured, it was about 13KB.
But it varies by which QEMU version is used.
You can do 'light' snapshots in between to send dirty pages to reduce
snapshot time.
I agree. That's one of the advanced topic we would like to try too.
I wrote the above to serve a reference for your comments so it will map
into my mind. Thanks, dor
Thank your for the guidance.
I hope this answers to your question.
At the same time, I would also be happy it we could discuss how to implement
too. In fact, we needed a hack to prevent rip from proceeding in KVM, which
turned out that it was not the best workaround.
Thanks,
Yoshi
TODO:
- Synchronization of clock sources (need to intercept TSC reads, etc).
=== usability ===
These are items that defines how users interact with Kemari.
TODO:
- Kemarid daemon that takes care of the cluster management/monitoring
side of things.
- Some device emulators might need minor modifications to work well
with Kemari. Use white(black)-listing to take the burden of
choosing the right device model off the users.
=== optimizations ===
Although the big picture can be realized by completing the TODO list
above, we
need some optimizations/enhancements to make Kemari useful in real
world, and
these are items what needs to be done for that.
TODO:
- SMP (for the sake of performance might need to implement a
synchronization protocol that can maintain two or more
synchronization points active at any given moment)
- VGA (leverage VNC's subtilting mechanism to identify fb pages that
are really dirty).
Any comments/suggestions would be greatly appreciated.
Thanks,
Yoshi
--
Kemari starts synchronizing VMs when QEMU handles I/O requests.
Without this patch VCPU state is already proceeded before
synchronization, and after failover to the VM on the receiver, it
hangs because of this.
Signed-off-by: Yoshiaki Tamura<tamura.yoshiaki@xxxxxxxxxxxxx>
---
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kvm/svm.c | 11 ++++++++---
arch/x86/kvm/vmx.c | 11 ++++++++---
arch/x86/kvm/x86.c | 4 ++++
4 files changed, 21 insertions(+), 6 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h
b/arch/x86/include/asm/kvm_host.h
index 26c629a..7b8f514 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -227,6 +227,7 @@ struct kvm_pio_request {
int in;
int port;
int size;
+ bool lazy_skip;
};
/*
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index d04c7ad..e373245 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1495,7 +1495,7 @@ static int io_interception(struct vcpu_svm *svm)
{
struct kvm_vcpu *vcpu =&svm->vcpu;
u32 io_info = svm->vmcb->control.exit_info_1; /* address size bug? */
- int size, in, string;
+ int size, in, string, ret;
unsigned port;
++svm->vcpu.stat.io_exits;
@@ -1507,9 +1507,14 @@ static int io_interception(struct vcpu_svm *svm)
port = io_info>> 16;
size = (io_info& SVM_IOIO_SIZE_MASK)>> SVM_IOIO_SIZE_SHIFT;
svm->next_rip = svm->vmcb->control.exit_info_2;
- skip_emulated_instruction(&svm->vcpu);
- return kvm_fast_pio_out(vcpu, size, port);
+ ret = kvm_fast_pio_out(vcpu, size, port);
+ if (ret)
+ skip_emulated_instruction(&svm->vcpu);
+ else
+ vcpu->arch.pio.lazy_skip = true;
+
+ return ret;
}
static int nmi_interception(struct vcpu_svm *svm)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 41e63bb..09052d6 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2975,7 +2975,7 @@ static int handle_triple_fault(struct kvm_vcpu
*vcpu)
static int handle_io(struct kvm_vcpu *vcpu)
{
unsigned long exit_qualification;
- int size, in, string;
+ int size, in, string, ret;
unsigned port;
exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
@@ -2989,9 +2989,14 @@ static int handle_io(struct kvm_vcpu *vcpu)
port = exit_qualification>> 16;
size = (exit_qualification& 7) + 1;
- skip_emulated_instruction(vcpu);
- return kvm_fast_pio_out(vcpu, size, port);
+ ret = kvm_fast_pio_out(vcpu, size, port);
+ if (ret)
+ skip_emulated_instruction(vcpu);
+ else
+ vcpu->arch.pio.lazy_skip = true;
+
+ return ret;
}
static void
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index fd5c3d3..cc308d2 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4544,6 +4544,10 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu
*vcpu, struct kvm_run *kvm_run)
if (!irqchip_in_kernel(vcpu->kvm))
kvm_set_cr8(vcpu, kvm_run->cr8);
+ if (vcpu->arch.pio.lazy_skip)
+ kvm_x86_ops->skip_emulated_instruction(vcpu);
+ vcpu->arch.pio.lazy_skip = false;
+
if (vcpu->arch.pio.count || vcpu->mmio_needed ||
vcpu->arch.emulate_ctxt.restart) {
if (vcpu->mmio_needed) {
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
