Re: [PATCH v5] KVM: x86/tsc: Don't sync TSC on the first write in state restoration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13/9/2023 4:37 pm, David Woodhouse wrote:
On Wed, 2023-09-13 at 15:21 +0800, Like Xu wrote:
From: Like Xu <likexu@xxxxxxxxxxx>

Add kvm->arch.user_set_tsc to avoid synchronization on the first write
from userspace so as not to misconstrue state restoration after live
migration as an attempt from userspace to synchronize. More precisely,
the problem is that the sync code doesn't differentiate between userspace
initializing the TSC and userspace attempting to synchronize the TSC.


That commit message definitely needs work. Oliver gave you some
verbiage which made a lot more sense to me. Let me try again...

Thank you for reviewing it.


================

[PATCH] KVM: x86/tsc: Don't sync user-written TSC against startup values

The legacy API for setting the TSC is fundamentally broken, and only
allows userspace to set a TSC "now", without any way to account for
time lost to preemption between the calculation of the value, and the
kernel eventually handling the ioctl.

To work around this we have had a hack which, if a TSC is set with a
value which is within a second's worth of a previous vCPU, assumes that
userspace actually intended them to be in sync and adjusts the newly-
written TSC value accordingly.

Thus, when a VMM restores a guest after suspend or migration using the
legacy API, the TSCs aren't necessarily *right*, but at least they're
in sync.

This trick falls down when restoring a guest which genuinely has been
running for less time than the 1 second of imprecision which we allow
for in the legacy API. On *creation* the first vCPU starts its TSC
counting from zero, and the subsequent vCPUs synchronize to that. But
then when the VMM tries to set the intended TSC value, because that's
within a second of what the last TSC synced to, it just adjusts it to
match that.

The correct answer is for the VMM not to use the legacy API of course.

But we can pile further hacks onto our existing hackish ABI, and
declare that the *first* value written by userspace (on any vCPU)
should not be subject to this 'correction' to make it sync up with
values that only from from the kernel's default vCPU creation.

To that end: Add a flag in kvm->arch.user_set_tsc, protected by
kvm->arch.tsc_write_lock, to record that a TSC for at least one vCPU in
this KVM *has* been set by userspace. Make the 1-second slop hack only
trigger if that flag is already set.

===================

I think you also need to set kvm->arch.user_set_tsc() in
kvm_arch_tsc_set_attr(), don't you?

How about:

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c55cc60769db..374965f66137 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -5545,6 +5545,7 @@ static int kvm_arch_tsc_set_attr(struct kvm_vcpu *vcpu,
 		tsc = kvm_scale_tsc(rdtsc(), vcpu->arch.l1_tsc_scaling_ratio) + offset;
 		ns = get_kvmclock_base_ns();

+		kvm->arch.user_set_tsc = true;
 		__kvm_synchronize_tsc(vcpu, offset, tsc, ns, matched);
 		raw_spin_unlock_irqrestore(&kvm->arch.tsc_write_lock, flags);



Reported-by: Yong He <alexyonghe@xxxxxxxxxxx>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217423
Suggested-by: Sean Christopherson <seanjc@xxxxxxxxxx>
Suggested-by: Oliver Upton <oliver.upton@xxxxxxxxx>
Original-by: Sean Christopherson <seanjc@xxxxxxxxxx>
Tested-by: Like Xu <likexu@xxxxxxxxxxx>
Signed-off-by: Like Xu <likexu@xxxxxxxxxxx>
---
V4 -> V5 Changelog:
- Making kvm_synchronize_tsc(@data) a pointer and passing NULL; (Sean)
- Refine commit message in a more accurate way; (Sean)
V4: https://lore.kernel.org/kvm/20230801034524.64007-1-likexu@xxxxxxxxxxx/

  arch/x86/include/asm/kvm_host.h |  1 +
  arch/x86/kvm/x86.c              | 25 ++++++++++++++++---------
  2 files changed, 17 insertions(+), 9 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 1a4def36d5bb..9a7dfef9d32d 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1324,6 +1324,7 @@ struct kvm_arch {
         int nr_vcpus_matched_tsc;
        u32 default_tsc_khz;
+       bool user_set_tsc;
        seqcount_raw_spinlock_t pvclock_sc;
         bool use_master_clock;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6c9c81e82e65..0fef6ed69cbb 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2714,8 +2714,9 @@ static void __kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 offset, u64 tsc,
         kvm_track_tsc_matching(vcpu);
  }
-static void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 data)
+static void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 *user_value)
  {
+       u64 data = user_value ? *user_value : 0;
         struct kvm *kvm = vcpu->kvm;
         u64 offset, ns, elapsed;
         unsigned long flags;
@@ -2728,14 +2729,17 @@ static void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 data)
         elapsed = ns - kvm->arch.last_tsc_nsec;
        if (vcpu->arch.virtual_tsc_khz) {
+               /*
+                * Force synchronization when creating or hotplugging a vCPU,
+                * i.e. when the TSC value is '0', to help keep clocks stable.
+                * If this is NOT a hotplug/creation case, skip synchronization
+                * on the first write from userspace so as not to misconstrue
+                * state restoration after live migration as an attempt from
+                * userspace to synchronize.

This comment isn't quite right; it wants to use some excerpt of the
commit message I've suggested above.

How about:

@@ -2735,20 +2735,34 @@ static void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 data)
 			 * kvm_clock stable after CPU hotplug
 			 */
 			synchronizing = true;
-		} else {
+		} else if (kvm->arch.user_set_tsc) {
 			u64 tsc_exp = kvm->arch.last_tsc_write +
 						nsec_to_cycles(vcpu, elapsed);
 			u64 tsc_hz = vcpu->arch.virtual_tsc_khz * 1000LL;
 			/*
-			 * Special case: TSC write with a small delta (1 second)
-			 * of virtual cycle time against real time is
-			 * interpreted as an attempt to synchronize the CPU.
+			 * Here lies UAPI baggage: user-initiated TSC write with
+			 * a small delta (1 second) of virtual cycle time
+			 * against real time is interpreted as an attempt to
+			 * synchronize the CPU.
+			 *
+			 * This trick falls down when restoring a guest which genuinely
+			 * has been running for less time than the 1 second of imprecision
+			 * which we allow for in the legacy API. In this case, the first
+			 * value written by userspace (on any vCPU) should not be subject
+			 * to this 'correction' to make it sync up with values that only
+			 * from from the kernel's default vCPU creation. Make the 1-second
+			 * slop hack only trigger if flag is already set.
+			 *
+			 * The correct answer is for the VMM not to use the legacy API.
 			 */
 			synchronizing = data < tsc_exp + tsc_hz &&
 					data + tsc_hz > tsc_exp;
 		}
 	}


+                */
                 if (data == 0) {
-                       /*
-                        * detection of vcpu initialization -- need to sync
-                        * with other vCPUs. This particularly helps to keep
-                        * kvm_clock stable after CPU hotplug
-                        */
                         synchronizing = true;
-               } else {
+               } else if (kvm->arch.user_set_tsc) {
                         u64 tsc_exp = kvm->arch.last_tsc_write +
                                                 nsec_to_cycles(vcpu, elapsed);
                         u64 tsc_hz = vcpu->arch.virtual_tsc_khz * 1000LL;
@@ -2749,6 +2753,9 @@ static void kvm_synchronize_tsc(struct kvm_vcpu *vcpu, u64 data)
                 }
         }
+       if (user_value)
+               kvm->arch.user_set_tsc = true;
+
         /*
          * For a reliable TSC, we can match TSC offsets, and for an unstable
          * TSC, we add elapsed time in this computation.  We could let the
@@ -3777,7 +3784,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
                 break;
         case MSR_IA32_TSC:
                 if (msr_info->host_initiated) {
-                       kvm_synchronize_tsc(vcpu, data);
+                       kvm_synchronize_tsc(vcpu, &data);

Userspace used to be able to write zero to force a sync. You've removed
that ability from the ABI, and haven't even mentioned it. Must we?

Will continue to use "bool user_initiated" for lack of a better move.


                 } else {
                         u64 adj = kvm_compute_l1_tsc_offset(vcpu, data) - vcpu->arch.l1_tsc_offset;
                         adjust_tsc_offset_guest(vcpu, adj);
@@ -11959,7 +11966,7 @@ void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
         if (mutex_lock_killable(&vcpu->mutex))
                 return;
         vcpu_load(vcpu);
-       kvm_synchronize_tsc(vcpu, 0);
+       kvm_synchronize_tsc(vcpu, NULL);
         vcpu_put(vcpu);
        /* poll control enabled by default */

base-commit: 0bb80ecc33a8fb5a682236443c1e740d5c917d1d




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux