Re: [PATCH v5 08/12] KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Raghavendra,

On 8/17/23 08:30, Raghavendra Rao Ananta wrote:
From: Reiji Watanabe <reijiw@xxxxxxxxxx>

KVM does not yet support userspace modifying PMCR_EL0.N (With
the previous patch, KVM ignores what is written by upserspace).
Add support userspace limiting PMCR_EL0.N.

Disallow userspace to set PMCR_EL0.N to a value that is greater
than the host value (KVM_SET_ONE_REG will fail), as KVM doesn't
support more event counters than the host HW implements.
Although this is an ABI change, this change only affects
userspace setting PMCR_EL0.N to a larger value than the host.
As accesses to unadvertised event counters indices is CONSTRAINED
UNPREDICTABLE behavior, and PMCR_EL0.N was reset to the host value
on every vCPU reset before this series, I can't think of any
use case where a user space would do that.

Also, ignore writes to read-only bits that are cleared on vCPU reset,
and RES{0,1} bits (including writable bits that KVM doesn't support
yet), as those bits shouldn't be modified (at least with
the current KVM).

Signed-off-by: Reiji Watanabe <reijiw@xxxxxxxxxx>
Signed-off-by: Raghavendra Rao Ananta <rananta@xxxxxxxxxx>
---
  arch/arm64/include/asm/kvm_host.h |  3 ++
  arch/arm64/kvm/pmu-emul.c         |  1 +
  arch/arm64/kvm/sys_regs.c         | 49 +++++++++++++++++++++++++++++--
  3 files changed, 51 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 0f2dbbe8f6a7e..c15ec365283d1 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -259,6 +259,9 @@ struct kvm_arch {
  	/* PMCR_EL0.N value for the guest */
  	u8 pmcr_n;
+ /* Limit value of PMCR_EL0.N for the guest */
+	u8 pmcr_n_limit;
+
  	/* Hypercall features firmware registers' descriptor */
  	struct kvm_smccc_features smccc_feat;
  	struct maple_tree smccc_filter;
diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c
index ce7de6bbdc967..39ad56a71ad20 100644
--- a/arch/arm64/kvm/pmu-emul.c
+++ b/arch/arm64/kvm/pmu-emul.c
@@ -896,6 +896,7 @@ int kvm_arm_set_vm_pmu(struct kvm *kvm, struct arm_pmu *arm_pmu)
  	 * while the latter does not.
  	 */
  	kvm->arch.pmcr_n = arm_pmu->num_events - 1;
+	kvm->arch.pmcr_n_limit = arm_pmu->num_events - 1;
return 0;
  }
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 2075901356c5b..c01d62afa7db4 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1086,6 +1086,51 @@ static int get_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
  	return 0;
  }
+static int set_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r,
+		    u64 val)
+{
+	struct kvm *kvm = vcpu->kvm;
+	u64 new_n, mutable_mask;
+	int ret = 0;
+
+	new_n = FIELD_GET(ARMV8_PMU_PMCR_N, val);
+
+	mutex_lock(&kvm->arch.config_lock);
+	if (unlikely(new_n != kvm->arch.pmcr_n)) {
+		/*
+		 * The vCPU can't have more counters than the PMU
+		 * hardware implements.
+		 */
+		if (new_n <= kvm->arch.pmcr_n_limit)
+			kvm->arch.pmcr_n = new_n;
+		else
+			ret = -EINVAL;
+	}
+	mutex_unlock(&kvm->arch.config_lock);

Another thing I am just wonder is that should we block any modification to the pmcr_n after vm start to run? Like add one more checking kvm_vm_has_ran_once() at the beginning of the set_pmcr() function.

Thanks,
Shaoqin

+	if (ret)
+		return ret;
+
+	/*
+	 * Ignore writes to RES0 bits, read only bits that are cleared on
+	 * vCPU reset, and writable bits that KVM doesn't support yet.
+	 * (i.e. only PMCR.N and bits [7:0] are mutable from userspace)
+	 * The LP bit is RES0 when FEAT_PMUv3p5 is not supported on the vCPU.
+	 * But, we leave the bit as it is here, as the vCPU's PMUver might
+	 * be changed later (NOTE: the bit will be cleared on first vCPU run
+	 * if necessary).
+	 */
+	mutable_mask = (ARMV8_PMU_PMCR_MASK | ARMV8_PMU_PMCR_N);
+	val &= mutable_mask;
+	val |= (__vcpu_sys_reg(vcpu, r->reg) & ~mutable_mask);
+
+	/* The LC bit is RES1 when AArch32 is not supported */
+	if (!kvm_supports_32bit_el0())
+		val |= ARMV8_PMU_PMCR_LC;
+
+	__vcpu_sys_reg(vcpu, r->reg) = val;
+	return 0;
+}
+
  /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */
  #define DBG_BCR_BVR_WCR_WVR_EL1(n)					\
  	{ SYS_DESC(SYS_DBGBVRn_EL1(n)),					\
@@ -2147,8 +2192,8 @@ static const struct sys_reg_desc sys_reg_descs[] = {
  	{ SYS_DESC(SYS_CTR_EL0), access_ctr },
  	{ SYS_DESC(SYS_SVCR), undef_access },
- { PMU_SYS_REG(PMCR_EL0), .access = access_pmcr,
-	  .reset = reset_pmcr, .reg = PMCR_EL0, .get_user = get_pmcr },
+	{ PMU_SYS_REG(PMCR_EL0), .access = access_pmcr, .reset = reset_pmcr,
+	  .reg = PMCR_EL0, .get_user = get_pmcr, .set_user = set_pmcr },
  	{ PMU_SYS_REG(PMCNTENSET_EL0),
  	  .access = access_pmcnten, .reg = PMCNTENSET_EL0 },
  	{ PMU_SYS_REG(PMCNTENCLR_EL0),

--
Shaoqin




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux