Re: [PATCH] KVM: VMX: Require KVM_SET_TSS_ADDR being called prior to running a VCPU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I just saw a new message after reboot today and searched for it and got
https://patchwork.kernel.org/project/kvm/patch/5142D010.7060303@xxxxxx/
and you might be interested that I ran into it.

[   70.747068] kvm: KVM_SET_TSS_ADDR need to be called before entering vcpu

Full dmesg attached. This is on reboot, no VMs are running yet.

I don’t get any extra weird messages on VM start, and they come up fine.

bye,
//mirabilos
-- 
Infrastrukturexperte • tarent solutions GmbH
Am Dickobskreuz 10, D-53121 Bonn • http://www.tarent.de/
Telephon +49 228 54881-393 • Fax: +49 228 54881-235
HRB AG Bonn 5168 • USt-ID (VAT): DE122264941
Geschäftsführer: Dr. Stefan Barth, Kai Ebenrett, Boris Esser, Alexander Steeg

                        ****************************************************
/⁀\ The UTF-8 Ribbon
╲ ╱ Campaign against      Mit dem tarent-Newsletter nichts mehr verpassen:
 ╳  HTML eMail! Also,     https://www.tarent.de/newsletter
╱ ╲ header encryption!
                        ****************************************************
[    0.000000] microcode: microcode updated early to revision 0x1d, date = 2018-05-11
[    0.000000] Linux version 5.10.0-23-amd64 (debian-kernel@xxxxxxxxxxxxxxxx) (gcc-10 (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP Debian 5.10.179-1 (2023-05-12)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.10.0-23-amd64 root=/dev/mapper/vg--tglase-lv--tglase ro rootdelay=5 net.ifnames=0 syscall.x32=y vsyscall=emulate kaslr l1tf=flush,nosmt
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfecffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfed0000-0x00000000cfed0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfed1000-0x00000000cfedffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000062fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. X58-USB3/X58-USB3, BIOS F5 09/07/2011
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3064.406 MHz processor
[    0.004021] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.004028] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.004040] last_pfn = 0x630000 max_arch_pfn = 0x400000000
[    0.004048] MTRR default type: uncachable
[    0.004050] MTRR fixed ranges enabled:
[    0.004052]   00000-9FFFF write-back
[    0.004054]   A0000-BFFFF uncachable
[    0.004057]   C0000-CDFFF write-protect
[    0.004059]   CE000-EFFFF uncachable
[    0.004061]   F0000-FFFFF write-through
[    0.004063] MTRR variable ranges enabled:
[    0.004066]   0 base 000000000 mask F00000000 write-back
[    0.004068]   1 base 0E0000000 mask FE0000000 uncachable
[    0.004071]   2 base 0D0000000 mask FF0000000 uncachable
[    0.004073]   3 base 100000000 mask F00000000 write-back
[    0.004076]   4 base 200000000 mask E00000000 write-back
[    0.004078]   5 base 400000000 mask C00000000 write-back
[    0.004080]   6 base 500000000 mask F00000000 write-back
[    0.004083]   7 base 600000000 mask FC0000000 write-back
[    0.005066] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.005655] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.005667] last_pfn = 0xcfed0 max_arch_pfn = 0x400000000
[    0.017369] found SMP MP-table at [mem 0x000f5a60-0x000f5a6f]
[    0.032097] RAMDISK: [mem 0x32de9000-0x356ebfff]
[    0.032108] ACPI: Early table checksum verification disabled
[    0.032113] ACPI: RSDP 0x00000000000F7200 000014 (v00 GBT   )
[    0.032122] ACPI: RSDT 0x00000000CFED1040 000048 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.032134] ACPI: FACP 0x00000000CFED1100 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.032147] ACPI: DSDT 0x00000000CFED11C0 00391C (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.032157] ACPI: FACS 0x00000000CFED0000 000040
[    0.032165] ACPI: MSDM 0x00000000CFED4CC0 000055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.032174] ACPI: HPET 0x00000000CFED4D80 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.032184] ACPI: MCFG 0x00000000CFED4E00 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.032193] ACPI: EUDS 0x00000000CFED4E40 0004D0 (v01 GBT             00000000      00000000)
[    0.032202] ACPI: MATS 0x00000000CFED5310 000034 (v01 GBT             00000000      00000000)
[    0.032211] ACPI: TAMG 0x00000000CFED5380 000CFA (v01 GBT    GBT   B0 5455312E BG?? 53450101)
[    0.032221] ACPI: APIC 0x00000000CFED4B40 00012C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.032230] ACPI: SSDT 0x00000000CFED6080 002B1C (v01 INTEL  PPM RCM  80000001 INTL 20061109)
[    0.032239] ACPI: Reserving FACP table memory at [mem 0xcfed1100-0xcfed1173]
[    0.032242] ACPI: Reserving DSDT table memory at [mem 0xcfed11c0-0xcfed4adb]
[    0.032245] ACPI: Reserving FACS table memory at [mem 0xcfed0000-0xcfed003f]
[    0.032248] ACPI: Reserving MSDM table memory at [mem 0xcfed4cc0-0xcfed4d14]
[    0.032251] ACPI: Reserving HPET table memory at [mem 0xcfed4d80-0xcfed4db7]
[    0.032254] ACPI: Reserving MCFG table memory at [mem 0xcfed4e00-0xcfed4e3b]
[    0.032256] ACPI: Reserving EUDS table memory at [mem 0xcfed4e40-0xcfed530f]
[    0.032259] ACPI: Reserving MATS table memory at [mem 0xcfed5310-0xcfed5343]
[    0.032262] ACPI: Reserving TAMG table memory at [mem 0xcfed5380-0xcfed6079]
[    0.032265] ACPI: Reserving APIC table memory at [mem 0xcfed4b40-0xcfed4c6b]
[    0.032268] ACPI: Reserving SSDT table memory at [mem 0xcfed6080-0xcfed8b9b]
[    0.032289] ACPI: Local APIC address 0xfee00000
[    0.032353] No NUMA configuration found
[    0.032356] Faking a node at [mem 0x0000000000000000-0x000000062fffffff]
[    0.032377] NODE_DATA(0) allocated [mem 0x62ffc5000-0x62ffeefff]
[    0.033488] Zone ranges:
[    0.033491]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.033495]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.033500]   Normal   [mem 0x0000000100000000-0x000000062fffffff]
[    0.033503]   Device   empty
[    0.033507] Movable zone start for each node
[    0.033514] Early memory node ranges
[    0.033517]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.033520]   node   0: [mem 0x0000000000100000-0x00000000cfecffff]
[    0.033524]   node   0: [mem 0x0000000100000000-0x000000062fffffff]
[    0.033535] Initmem setup node 0 [mem 0x0000000000001000-0x000000062fffffff]
[    0.033539] On node 0 totalpages: 6291052
[    0.033541]   DMA zone: 64 pages used for memmap
[    0.033543]   DMA zone: 21 pages reserved
[    0.033545]   DMA zone: 3996 pages, LIFO batch:0
[    0.033547]   DMA32 zone: 13244 pages used for memmap
[    0.033549]   DMA32 zone: 847568 pages, LIFO batch:63
[    0.033551]   Normal zone: 84992 pages used for memmap
[    0.033553]   Normal zone: 5439488 pages, LIFO batch:63
[    0.033560] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.033639] On node 0, zone DMA: 99 pages in unavailable ranges
[    0.050433] On node 0, zone Normal: 304 pages in unavailable ranges
[    0.050645] ACPI: PM-Timer IO Port: 0x408
[    0.050651] ACPI: Local APIC address 0xfee00000
[    0.050665] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.050668] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.050670] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.050673] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.050676] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[    0.050678] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[    0.050681] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[    0.050683] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[    0.050686] ACPI: LAPIC_NMI (acpi_id[0x08] dfl dfl lint[0x1])
[    0.050689] ACPI: LAPIC_NMI (acpi_id[0x09] dfl dfl lint[0x1])
[    0.050691] ACPI: LAPIC_NMI (acpi_id[0x0a] dfl dfl lint[0x1])
[    0.050694] ACPI: LAPIC_NMI (acpi_id[0x0b] dfl dfl lint[0x1])
[    0.050696] ACPI: LAPIC_NMI (acpi_id[0x0c] dfl dfl lint[0x1])
[    0.050699] ACPI: LAPIC_NMI (acpi_id[0x0d] dfl dfl lint[0x1])
[    0.050702] ACPI: LAPIC_NMI (acpi_id[0x0e] dfl dfl lint[0x1])
[    0.050704] ACPI: LAPIC_NMI (acpi_id[0x0f] dfl dfl lint[0x1])
[    0.050718] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.050723] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.050726] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.050730] ACPI: IRQ0 used by override.
[    0.050733] ACPI: IRQ9 used by override.
[    0.050738] Using ACPI (MADT) for SMP configuration information
[    0.050742] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.050750] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[    0.050777] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.050781] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.050784] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.050787] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.050791] PM: hibernation: Registered nosave memory: [mem 0xcfed0000-0xcfed0fff]
[    0.050794] PM: hibernation: Registered nosave memory: [mem 0xcfed1000-0xcfedffff]
[    0.050796] PM: hibernation: Registered nosave memory: [mem 0xcfee0000-0xcfefffff]
[    0.050799] PM: hibernation: Registered nosave memory: [mem 0xcff00000-0xf3ffffff]
[    0.050801] PM: hibernation: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[    0.050804] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[    0.050806] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.050811] [mem 0xcff00000-0xf3ffffff] available for PCI devices
[    0.050813] Booting paravirtualized kernel on bare hardware
[    0.050819] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.058869] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
[    0.059671] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
[    0.059685] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
[    0.059688] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.059761] Built 1 zonelists, mobility grouping on.  Total pages: 6192731
[    0.059763] Policy zone: Normal
[    0.059767] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.0-23-amd64 root=/dev/mapper/vg--tglase-lv--tglase ro rootdelay=5 net.ifnames=0 syscall.x32=y vsyscall=emulate kaslr l1tf=flush,nosmt
[    0.063119] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.064704] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.065087] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.111088] Memory: 3380248K/25164208K available (12295K kernel code, 2536K rwdata, 7568K rodata, 2668K init, 17720K bss, 603924K reserved, 0K cma-reserved)
[    0.111625] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.111659] Kernel/User page tables isolation: enabled
[    0.111704] ftrace: allocating 36577 entries in 143 pages
[    0.149381] ftrace: allocated 143 pages with 5 groups
[    0.149645] rcu: Hierarchical RCU implementation.
[    0.149649] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
[    0.149652] 	Rude variant of Tasks RCU enabled.
[    0.149654] 	Tracing variant of Tasks RCU enabled.
[    0.149656] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.149659] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.160193] NR_IRQS: 524544, nr_irqs: 552, preallocated irqs: 16
[    0.164966] Console: colour VGA+ 80x25
[    0.172581] printk: console [tty0] enabled
[    0.172674] ACPI: Core revision 20200925
[    0.172871] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.172968] APIC: Switch to symmetric I/O mode setup
[    0.173026] DMAR-IR: This system BIOS has enabled interrupt remapping
               on a chipset that contains an erratum making that
               feature unstable.  To maintain system stability
               interrupt remapping is being disabled.  Please
               contact your BIOS vendor for an update
[    0.173188] Switched APIC routing to physical flat.
[    0.173972] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.192971] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c2bef754df, max_idle_ns: 440795262435 ns
[    0.193058] Calibrating delay loop (skipped), value calculated using timer frequency.. 6128.81 BogoMIPS (lpj=12257624)
[    0.193145] pid_max: default: 32768 minimum: 301
[    0.193337] LSM: Security Framework initializing
[    0.193416] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.193537] AppArmor: AppArmor initialized
[    0.193596] TOMOYO Linux initialized
[    0.193790] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.193952] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.194609] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.194682] process: using mwait in idle threads
[    0.194744] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.194802] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.194865] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.194946] Spectre V2 : Mitigation: Retpolines
[    0.195003] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.195081] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.195142] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.195205] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.195284] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.195347] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.195428] SMT: disabled
[    0.195483] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.196548] MMIO Stale Data: Unknown: No mitigations
[    0.215722] Freeing SMP alternatives memory: 32K
[    0.330068] smpboot: CPU0: Intel(R) Core(TM) i7 CPU         950  @ 3.07GHz (family: 0x6, model: 0x1a, stepping: 0x5)
[    0.330428] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
[    0.330516] core: CPU erratum AAJ80 worked around
[    0.330573] core: CPUID marked event: 'bus cycles' unavailable
[    0.330632] ... version:                3
[    0.330687] ... bit width:              48
[    0.330742] ... generic registers:      4
[    0.330797] ... value mask:             0000ffffffffffff
[    0.330855] ... max period:             000000007fffffff
[    0.330912] ... fixed-purpose events:   3
[    0.330967] ... event mask:             000000070000000f
[    0.331208] rcu: Hierarchical SRCU implementation.
[    0.332976] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.333055] smp: Bringing up secondary CPUs ...
[    0.333055] x86: Booting SMP configuration:
[    0.333055] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7
[    0.361294] smp: Brought up 1 node, 4 CPUs
[    0.361417] smpboot: Max logical packages: 4
[    0.361473] smpboot: Total of 4 processors activated (24515.24 BogoMIPS)
[    0.409130] node 0 deferred pages initialised in 44ms
[    0.409884] devtmpfs: initialized
[    0.409884] x86/mm: Memory block size: 128MB
[    0.414766] PM: Registering ACPI NVS region [mem 0xcfed0000-0xcfed0fff] (4096 bytes)
[    0.414766] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.414766] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.414766] pinctrl core: initialized pinctrl subsystem
[    0.414766] NET: Registered protocol family 16
[    0.414844] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.417192] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.417809] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.417910] audit: initializing netlink subsys (disabled)
[    0.417990] audit: type=2000 audit(1687915223.244:1): state=initialized audit_enabled=0 res=1
[    0.417990] thermal_sys: Registered thermal governor 'fair_share'
[    0.417990] thermal_sys: Registered thermal governor 'bang_bang'
[    0.417990] thermal_sys: Registered thermal governor 'step_wise'
[    0.417990] thermal_sys: Registered thermal governor 'user_space'
[    0.417990] thermal_sys: Registered thermal governor 'power_allocator'
[    0.417990] cpuidle: using governor ladder
[    0.417990] cpuidle: using governor menu
[    0.417990] Enabled x32 syscalls
[    0.417990] ACPI: bus type PCI registered
[    0.417990] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.418133] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[    0.418217] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[    0.418287] pmd_set_huge: Cannot satisfy [mem 0xf4000000-0xf4200000] with a huge-page mapping due to MTRR override.
[    0.418575] PCI: Using configuration type 1 for base access
[    0.421984] Kprobes globally optimized
[    0.422049] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.745218] ACPI: Added _OSI(Module Device)
[    0.745278] ACPI: Added _OSI(Processor Device)
[    0.745335] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.745392] ACPI: Added _OSI(Processor Aggregator Device)
[    0.745450] ACPI: Added _OSI(Linux-Dell-Video)
[    0.745507] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.745565] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.748886] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.754306] ACPI: Interpreter enabled
[    0.754386] ACPI: (supports S0 S3 S4 S5)
[    0.754442] ACPI: Using IOAPIC for interrupt routing
[    0.754528] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.754789] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.760412] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.760480] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.760851] PCI host bridge to bus 0000:00
[    0.760910] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.760972] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.761034] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.761059] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.761137] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff window]
[    0.761214] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.761296] pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
[    0.761389] pci 0000:00:00.0: enabling Extended Tags
[    0.761495] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.761696] pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
[    0.761791] pci 0000:00:02.0: enabling Extended Tags
[    0.761897] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.762089] pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
[    0.762184] pci 0000:00:03.0: enabling Extended Tags
[    0.762292] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.762486] pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
[    0.762694] pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
[    0.762891] pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
[    0.763093] pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
[    0.763298] pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
[    0.763370] pci 0000:00:13.0: reg 0x10: [mem 0xfbfff000-0xfbffffff]
[    0.763488] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[    0.763654] pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
[    0.763881] pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
[    0.764101] pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
[    0.764321] pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
[    0.764524] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
[    0.764630] pci 0000:00:1a.0: reg 0x20: [io  0xff00-0xff1f]
[    0.764866] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
[    0.764972] pci 0000:00:1a.1: reg 0x20: [io  0xfe00-0xfe1f]
[    0.765231] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
[    0.765337] pci 0000:00:1a.2: reg 0x20: [io  0xfd00-0xfd1f]
[    0.765582] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
[    0.765659] pci 0000:00:1a.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
[    0.765811] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.766013] pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
[    0.766092] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit]
[    0.766241] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.766451] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
[    0.766600] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.766819] pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
[    0.766974] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.767187] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
[    0.767293] pci 0000:00:1d.0: reg 0x20: [io  0xfc00-0xfc1f]
[    0.767530] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
[    0.767635] pci 0000:00:1d.1: reg 0x20: [io  0xfb00-0xfb1f]
[    0.767868] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
[    0.767973] pci 0000:00:1d.2: reg 0x20: [io  0xfa00-0xfa1f]
[    0.768211] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
[    0.768289] pci 0000:00:1d.7: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
[    0.768441] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.768645] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.768906] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
[    0.769090] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.769172] pci 0000:00:1f.0: quirk: [io  0x0580-0x05bf] claimed by ICH6 GPIO
[    0.769235] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.769315] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.769553] pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
[    0.769627] pci 0000:00:1f.2: reg 0x10: [io  0xf900-0xf907]
[    0.769693] pci 0000:00:1f.2: reg 0x14: [io  0xf800-0xf803]
[    0.769759] pci 0000:00:1f.2: reg 0x18: [io  0xf700-0xf707]
[    0.769824] pci 0000:00:1f.2: reg 0x1c: [io  0xf600-0xf603]
[    0.769889] pci 0000:00:1f.2: reg 0x20: [io  0xf500-0xf51f]
[    0.769955] pci 0000:00:1f.2: reg 0x24: [mem 0xfbffc000-0xfbffc7ff]
[    0.770063] pci 0000:00:1f.2: PME# supported from D3hot
[    0.770252] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
[    0.770331] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffb000-0xfbffb0ff 64bit]
[    0.770413] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.770671] pci 0000:01:00.0: [1033:0194] type 00 class 0x0c0330
[    0.770753] pci 0000:01:00.0: reg 0x10: [mem 0xfbcfe000-0xfbcfffff 64bit]
[    0.770921] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.781096] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.781160] pci 0000:00:02.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.781286] pci 0000:02:00.0: [10de:10c3] type 00 class 0x030000
[    0.781358] pci 0000:02:00.0: reg 0x10: [mem 0xf9000000-0xf9ffffff]
[    0.781429] pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.781515] pci 0000:02:00.0: reg 0x1c: [mem 0xee000000-0xefffffff 64bit pref]
[    0.781598] pci 0000:02:00.0: reg 0x24: [io  0xdf00-0xdf7f]
[    0.781664] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.781730] pci 0000:02:00.0: enabling Extended Tags
[    0.781939] pci 0000:02:00.1: [10de:0be3] type 00 class 0x040300
[    0.782012] pci 0000:02:00.1: reg 0x10: [mem 0xfaffc000-0xfaffffff]
[    0.782114] pci 0000:02:00.1: enabling Extended Tags
[    0.793083] pci 0000:00:03.0: PCI bridge to [bus 02]
[    0.793144] pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
[    0.793206] pci 0000:00:03.0:   bridge window [mem 0xf9000000-0xfaffffff]
[    0.793270] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[    0.793403] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.793541] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[    0.793623] pci 0000:04:00.0: reg 0x10: [io  0xee00-0xeeff]
[    0.793710] pci 0000:04:00.0: reg 0x18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
[    0.793804] pci 0000:04:00.0: reg 0x20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
[    0.795019] pci 0000:04:00.0: supports D1 D2
[    0.795077] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.795267] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
[    0.805083] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.805144] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.805210] pci 0000:00:1c.4:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    0.805307] pci_bus 0000:05: extended config space not accessible
[    0.805406] pci 0000:05:00.0: [8086:107c] type 00 class 0x020000
[    0.805484] pci 0000:05:00.0: reg 0x10: [mem 0xfbee0000-0xfbefffff]
[    0.805553] pci 0000:05:00.0: reg 0x14: [mem 0xfbec0000-0xfbedffff]
[    0.805622] pci 0000:05:00.0: reg 0x18: [io  0xcf00-0xcf3f]
[    0.805716] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.805820] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.805980] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.806045] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.806107] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.806173] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.806253] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.806332] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.806413] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.806494] pci 0000:00:1e.0:   bridge window [mem 0xcff00000-0xfebfffff window] (subtractive decode)
[    0.807180] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.807338] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[    0.807492] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.807647] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.807801] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.807959] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.808113] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[    0.808267] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.808567] iommu: Default domain type: Translated 
[    0.809093] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[    0.809136] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.809216] pci 0000:02:00.0: vgaarb: bridge control possible
[    0.809274] vgaarb: loaded
[    0.809274] EDAC MC: Ver: 3.0.0
[    0.809304] NetLabel: Initializing
[    0.809360] NetLabel:  domain hash size = 128
[    0.809415] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.809499] NetLabel:  unlabeled traffic allowed by default
[    0.809559] PCI: Using ACPI for IRQ routing
[    0.811203] PCI: Discovered peer bus 3f
[    0.811258] PCI: root bus 3f: using default resources
[    0.811260] PCI: Probing PCI hardware (bus 3f)
[    0.811296] PCI host bridge to bus 0000:3f
[    0.811354] pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
[    0.811415] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[    0.811477] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[    0.811556] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
[    0.811648] pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000
[    0.811775] pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000
[    0.811903] pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000
[    0.812025] pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000
[    0.812149] pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000
[    0.812282] pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000
[    0.812406] pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000
[    0.812530] pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000
[    0.812651] pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000
[    0.813104] pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000
[    0.813226] pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000
[    0.813356] pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000
[    0.813482] pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000
[    0.813610] pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000
[    0.813732] pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000
[    0.813857] pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000
[    0.813978] pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000
[    0.814100] pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000
[    0.814226] pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000
[    0.814363] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[    0.814426] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
[    0.814518] PCI: pci_cache_line_size set to 64 bytes
[    0.814616] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.814618] e820: reserve RAM buffer [mem 0xcfed0000-0xcfffffff]
[    0.817294] hpet: 4 channels of 0 reserved for per-cpu timers
[    0.817359] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.817421] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.819536] clocksource: Switched to clocksource tsc-early
[    0.838163] VFS: Disk quotas dquot_6.6.0
[    0.838261] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.838542] AppArmor: AppArmor Filesystem Enabled
[    0.838632] pnp: PnP ACPI init
[    0.838924] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.838986] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.839046] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.839106] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.839166] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.839234] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.839330] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.839485] pnp 00:02: [dma 2]
[    0.839530] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.839684] system 00:03: [io  0x0400-0x047f] has been reserved
[    0.839747] system 00:03: [io  0x0580-0x05ff] could not be reserved
[    0.839813] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.840107] system 00:04: [mem 0xf4000000-0xf7ffffff] has been reserved
[    0.840175] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.840432] system 00:05: [mem 0x000f0000-0x000f3fff] could not be reserved
[    0.840496] system 00:05: [mem 0x000f4000-0x000f7fff] could not be reserved
[    0.840559] system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.840621] system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.840683] system 00:05: [mem 0xcfed0000-0xcfedffff] could not be reserved
[    0.840746] system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.840808] system 00:05: [mem 0x00100000-0xcfecffff] could not be reserved
[    0.840870] system 00:05: [mem 0xcfee0000-0xcfefffff] has been reserved
[    0.840932] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.840994] system 00:05: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.841056] system 00:05: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.841117] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.841179] system 00:05: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.841240] system 00:05: [mem 0xfff00000-0xffffffff] has been reserved
[    0.841301] system 00:05: [mem 0x000e0000-0x000effff] has been reserved
[    0.841368] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.841376] pnp: PnP ACPI: found 6 devices
[    0.848293] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.848514] NET: Registered protocol family 2
[    0.848872] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.852548] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.852992] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.853759] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.854027] TCP: Hash tables configured (established 262144 bind 65536)
[    0.854222] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.854477] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.854819] NET: Registered protocol family 1
[    0.854884] NET: Registered protocol family 44
[    0.854958] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.855039] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.855125] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.855210] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[    0.855314] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[    0.855381] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.855460] pci 0000:00:1c.4: BAR 14: assigned [mem 0xf0400000-0xf05fffff]
[    0.855524] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.855586] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.855647] pci 0000:00:02.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.855715] pci 0000:02:00.0: BAR 6: assigned [mem 0xfa000000-0xfa07ffff pref]
[    0.855793] pci 0000:00:03.0: PCI bridge to [bus 02]
[    0.855851] pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
[    0.855914] pci 0000:00:03.0:   bridge window [mem 0xf9000000-0xfaffffff]
[    0.855977] pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xefffffff 64bit pref]
[    0.856059] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.856117] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.856180] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff]
[    0.856243] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.856325] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.856383] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.856446] pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf05fffff]
[    0.856509] pci 0000:00:1c.4:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    0.856592] pci 0000:05:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe1ffff pref]
[    0.856669] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.856727] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.856790] pci 0000:00:1e.0:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.856858] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.856918] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.856978] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.857040] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.857101] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff window]
[    0.857163] pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    0.857224] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.857282] pci_bus 0000:02: resource 1 [mem 0xf9000000-0xfaffffff]
[    0.858369] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
[    0.858446] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.858505] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
[    0.858565] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.858647] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.858706] pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf05fffff]
[    0.858766] pci_bus 0000:04: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
[    0.858843] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.858902] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.858962] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.859022] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.859082] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.859144] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.859205] pci_bus 0000:05: resource 8 [mem 0xcff00000-0xfebfffff window]
[    0.859329] pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
[    0.859389] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[    0.878722] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x710 took 17986 usecs
[    0.898713] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x710 took 18709 usecs
[    0.899178] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.899300] pci 0000:02:00.1: D0 power state depends on 0000:02:00.0
[    0.899427] PCI: CLS 64 bytes, default 64
[    0.899593] Trying to unpack rootfs image as initramfs...
[    1.906809] Freeing initrd memory: 41996K
[    1.907053] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.907116] software IO TLB: mapped [mem 0x00000000cbed0000-0x00000000cfed0000] (64MB)
[    1.908171] Initialise system trusted keyrings
[    1.908257] Key type blacklist registered
[    1.908384] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[    1.910748] zbud: loaded
[    1.911115] integrity: Platform Keyring initialized
[    1.911177] Key type asymmetric registered
[    1.911233] Asymmetric key parser 'x509' registered
[    1.911300] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.911435] io scheduler mq-deadline registered
[    1.912818] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    1.913352] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.913432] intel_idle: MWAIT substates: 0x1120
[    1.913445] intel_idle: ACPI _CST not found or not usable
[    1.913446] intel_idle: v0.5.1 model 0x1A
[    1.913805] intel_idle: Local APIC timer is reliable in C1
[    1.916546] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.917777] Linux agpgart interface v0.103
[    1.917928] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[    1.918664] i8042: PNP: No PS/2 controller found.
[    1.918722] i8042: Probing ports directly.
[    1.951410] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[    1.951489] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[    2.221296] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.221820] mousedev: PS/2 mouse device common for all mice
[    2.221940] rtc_cmos 00:01: RTC can wake from S4
[    2.222434] rtc_cmos 00:01: registered as rtc0
[    2.222608] rtc_cmos 00:01: setting system clock to 2023-06-28T01:20:25 UTC (1687915225)
[    2.222741] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.222830] intel_pstate: CPU model not supported
[    2.223365] ledtrig-cpu: registered to indicate activity on CPUs
[    2.223971] NET: Registered protocol family 10
[    2.238172] Segment Routing with IPv6
[    2.238271] mip6: Mobile IPv6
[    2.238327] NET: Registered protocol family 17
[    2.238650] mpls_gso: MPLS GSO support
[    2.239493] microcode: sig=0x106a5, pf=0x2, revision=0x1d
[    2.239636] microcode: Microcode Update Driver: v2.2.
[    2.239641] IPI shorthand broadcast: enabled
[    2.239775] sched_clock: Marking stable (2227036622, 12275957)->(2248128561, -8815982)
[    2.240118] registered taskstats version 1
[    2.240179] Loading compiled-in X.509 certificates
[    2.314217] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    2.314328] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
[    2.314450] zswap: loaded using pool lzo/zbud
[    2.315285] Key type .fscrypt registered
[    2.315344] Key type fscrypt-provisioning registered
[    2.315488] AppArmor: AppArmor sha1 policy hashing enabled
[    2.317713] Freeing unused decrypted memory: 2036K
[    2.318534] Freeing unused kernel image (initmem) memory: 2668K
[    2.345212] Write protecting the kernel read-only data: 22528k
[    2.346304] Freeing unused kernel image (text/rodata gap) memory: 2040K
[    2.346733] Freeing unused kernel image (rodata/data gap) memory: 624K
[    2.438123] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.438271] x86/mm: Checking user space page tables
[    2.524065] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.524134] Run /init as init process
[    2.524190]   with arguments:
[    2.524191]     /init
[    2.524192]     kaslr
[    2.524193]   with environment:
[    2.524195]     HOME=/
[    2.524196]     TERM=linux
[    2.524197]     BOOT_IMAGE=/vmlinuz-5.10.0-23-amd64
[    2.547892] process '/usr/libexec/rnd_jytter' started with executable stack
[    2.687796] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.708576] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20200925/utaddress-204)
[    2.708695] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.708819] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.709380] ACPI: bus type USB registered
[    2.709473] usbcore: registered new interface driver usbfs
[    2.709545] usbcore: registered new interface driver hub
[    2.709624] usbcore: registered new device driver usb
[    2.718766] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.722191] e1000: Intel(R) PRO/1000 Network Driver
[    2.722252] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    2.727137] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.734377] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    2.734454] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    2.734633] xhci_hcd 0000:01:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[    2.735020] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    2.735083] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    2.735163] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    2.739873] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.739956] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.740034] usb usb1: Product: xHCI Host Controller
[    2.740091] usb usb1: Manufacturer: Linux 5.10.0-23-amd64 xhci-hcd
[    2.740151] usb usb1: SerialNumber: 0000:01:00.0
[    2.741040] uhci_hcd: USB Universal Host Controller Interface driver
[    2.741288] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.741407] hub 1-0:1.0: USB hub found
[    2.742360] hub 1-0:1.0: 2 ports detected
[    2.744916] ehci-pci: EHCI PCI platform driver
[    2.745465] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.745590] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    2.745670] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.745747] usb usb2: Product: xHCI Host Controller
[    2.745805] usb usb2: Manufacturer: Linux 5.10.0-23-amd64 xhci-hcd
[    2.745865] usb usb2: SerialNumber: 0000:01:00.0
[    2.746077] hub 2-0:1.0: USB hub found
[    2.746145] hub 2-0:1.0: 2 ports detected
[    2.746616] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.746703] uhci_hcd 0000:00:1a.0: detected 2 ports
[    2.746800] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[    2.747025] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.747107] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.747184] usb usb3: Product: UHCI Host Controller
[    2.747242] usb usb3: Manufacturer: Linux 5.10.0-23-amd64 uhci_hcd
[    2.747302] usb usb3: SerialNumber: 0000:00:1a.0
[    2.747516] hub 3-0:1.0: USB hub found
[    2.747583] hub 3-0:1.0: 2 ports detected
[    2.748138] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    2.748205] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 4
[    2.748293] ehci-pci 0000:00:1a.7: debug port 1
[    2.752247] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    2.752375] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbffe000
[    2.753100] r8169 0000:04:00.0 eth0: RTL8168e/8111e, 1c:6f:65:c4:c8:c2, XID 2c2, IRQ 26
[    2.753182] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    2.758853] SCSI subsystem initialized
[    2.765077] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    2.765223] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.765304] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.765381] usb usb4: Product: EHCI Host Controller
[    2.765439] usb usb4: Manufacturer: Linux 5.10.0-23-amd64 ehci_hcd
[    2.765499] usb usb4: SerialNumber: 0000:00:1a.7
[    2.765724] hub 4-0:1.0: USB hub found
[    2.765792] hub 4-0:1.0: 6 ports detected
[    2.782179] libata version 3.00 loaded.
[    2.789805] ahci 0000:00:1f.2: version 3.0
[    2.790056] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    2.791192] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    2.791273] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems 
[    2.793155] hub 3-0:1.0: USB hub found
[    2.793232] hub 3-0:1.0: 2 ports detected
[    2.796477] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.796545] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
[    2.796629] uhci_hcd 0000:00:1a.1: detected 2 ports
[    2.796717] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[    2.797003] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.797106] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.797184] usb usb5: Product: UHCI Host Controller
[    2.797241] usb usb5: Manufacturer: Linux 5.10.0-23-amd64 uhci_hcd
[    2.797302] usb usb5: SerialNumber: 0000:00:1a.1
[    2.800307] hub 5-0:1.0: USB hub found
[    2.800430] hub 5-0:1.0: 2 ports detected
[    2.800690] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.800758] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 6
[    2.800849] ehci-pci 0000:00:1d.7: debug port 1
[    2.804799] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.804876] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffd000
[    2.805379] r8169 0000:04:00.0 rl0: renamed from eth0
[    2.817228] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.817941] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    2.818025] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.818102] usb usb6: Product: EHCI Host Controller
[    2.818160] usb usb6: Manufacturer: Linux 5.10.0-23-amd64 ehci_hcd
[    2.818220] usb usb6: SerialNumber: 0000:00:1d.7
[    2.818644] hub 6-0:1.0: USB hub found
[    2.818715] hub 6-0:1.0: 6 ports detected
[    2.819030] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    2.819099] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[    2.819185] uhci_hcd 0000:00:1a.2: detected 2 ports
[    2.819269] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[    2.819494] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.819576] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.819653] usb usb7: Product: UHCI Host Controller
[    2.819710] usb usb7: Manufacturer: Linux 5.10.0-23-amd64 uhci_hcd
[    2.819771] usb usb7: SerialNumber: 0000:00:1a.2
[    2.819992] hub 7-0:1.0: USB hub found
[    2.820121] hub 7-0:1.0: 2 ports detected
[    2.820595] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.820661] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[    2.820744] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.820819] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[    2.820970] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.821051] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.821137] usb usb8: Product: UHCI Host Controller
[    2.821195] usb usb8: Manufacturer: Linux 5.10.0-23-amd64 uhci_hcd
[    2.821256] usb usb8: SerialNumber: 0000:00:1d.0
[    2.821488] hub 8-0:1.0: USB hub found
[    2.821557] hub 8-0:1.0: 2 ports detected
[    2.821941] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.822007] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[    2.822090] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.822175] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[    2.822318] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.822401] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.822478] usb usb9: Product: UHCI Host Controller
[    2.822535] usb usb9: Manufacturer: Linux 5.10.0-23-amd64 uhci_hcd
[    2.822596] usb usb9: SerialNumber: 0000:00:1d.1
[    2.822920] hub 9-0:1.0: USB hub found
[    2.822988] hub 9-0:1.0: 2 ports detected
[    2.823389] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.823455] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[    2.823538] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.823613] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[    2.823758] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    2.823839] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.823916] usb usb10: Product: UHCI Host Controller
[    2.823973] usb usb10: Manufacturer: Linux 5.10.0-23-amd64 uhci_hcd
[    2.824034] usb usb10: SerialNumber: 0000:00:1d.2
[    2.824347] hub 10-0:1.0: USB hub found
[    2.824415] hub 10-0:1.0: 2 ports detected
[    2.850238] scsi host0: ahci
[    2.850585] scsi host1: ahci
[    2.850866] scsi host2: ahci
[    2.853233] scsi host3: ahci
[    2.853692] scsi host4: ahci
[    2.854076] scsi host5: ahci
[    2.854225] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 32
[    2.854304] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 32
[    2.854382] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 32
[    2.854460] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 32
[    2.854537] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 32
[    2.854616] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 32
[    2.925197] tsc: Refined TSC clocksource calibration: 3064.488 MHz
[    2.925266] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c2c3ca10b8, max_idle_ns: 440795252656 ns
[    2.926909] clocksource: Switched to clocksource tsc
[    3.209197] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[    3.223380] e1000 0000:05:00.0 eth0: (PCI:33MHz:32-bit) 00:1b:21:62:25:77
[    3.223448] e1000 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection
[    3.329086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.335004] ata1.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
[    3.335068] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    3.341244] ata1.00: configured for UDMA/133
[    3.341726] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD502HJ  0001 PQ: 0 ANSI: 5
[    3.417273] usb 8-1: New USB device found, idVendor=17ef, idProduct=6009, bcdDevice= 1.27
[    3.417356] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.417419] usb 8-1: Product: ThinkPad USB Keyboard with TrackPoint
[    3.417479] usb 8-1: Manufacturer: Lite-On Technology Corp.
[    3.431871] hid: raw HID events driver (C) Jiri Kosina
[    3.817192] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.818624] ata2.00: ATA-8: ST3500418AS, CC46, max UDMA/133
[    3.818687] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32)
[    3.820360] ata2.00: configured for UDMA/133
[    3.820728] scsi 1:0:0:0: Direct-Access     ATA      ST3500418AS      CC46 PQ: 0 ANSI: 5
[    4.301148] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.302531] ata3.00: ATA-8: Hitachi HUA722050CLA330, JP2OA3EA, max UDMA/133
[    4.302597] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    4.304152] ata3.00: configured for UDMA/133
[    4.304541] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HUA72205 A3EA PQ: 0 ANSI: 5
[    4.781209] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.782493] ata4.00: ATA-8: WDC WD3200AAKS-75B3A0, 01.03A01, max UDMA/133
[    4.782558] ata4.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    4.784675] ata4.00: configured for UDMA/133
[    4.785179] scsi 3:0:0:0: Direct-Access     ATA      WDC WD3200AAKS-7 3A01 PQ: 0 ANSI: 5
[    5.097078] ata5: SATA link down (SStatus 0 SControl 300)
[    5.577164] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.583125] ata6.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
[    5.583193] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    5.589244] ata6.00: configured for UDMA/133
[    5.589693] scsi 5:0:0:0: Direct-Access     ATA      SAMSUNG HD502HJ  0001 PQ: 0 ANSI: 5
[    5.592669] e1000 0000:05:00.0 em0: renamed from eth0
[    5.607218] sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    5.607367] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    5.607398] sd 5:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    5.607458] sd 2:0:0:0: [sdc] Write Protect is off
[    5.607547] sd 5:0:0:0: [sde] Write Protect is off
[    5.607562] sd 3:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    5.607575] sd 3:0:0:0: [sdd] Write Protect is off
[    5.607577] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    5.607581] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    5.607602] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.607640] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    5.607692] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    5.607706] sd 0:0:0:0: [sda] Write Protect is off
[    5.607708] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.607727] sd 1:0:0:0: [sdb] Write Protect is off
[    5.607731] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.607825] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.607852] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    5.608279] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.608351] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.635677]  sdc: sdc1 sdc2
[    5.637958]  sde: sde1 sde2
[    5.638713]  sda: sda1 sda2
[    5.646472]  sdd: sdd1 sdd2
[    5.647356] usbcore: registered new interface driver usbhid
[    5.647418] usbhid: USB HID core driver
[    5.649341]  sdb: sdb1 sdb2
[    5.653487] sd 5:0:0:0: [sde] Attached SCSI disk
[    5.653511] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.653726] sd 2:0:0:0: [sdc] Attached SCSI disk
[    5.665798] sd 3:0:0:0: [sdd] Attached SCSI disk
[    5.665981] sd 1:0:0:0: [sdb] Attached SCSI disk
[    5.671136] input: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1:1.0/0003:17EF:6009.0001/input/input1
[    5.729530] lenovo 0003:17EF:6009.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1/input0
[    5.729986] input: Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1:1.1/0003:17EF:6009.0002/input/input2
[    5.789348] lenovo 0003:17EF:6009.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Lite-On Technology Corp. ThinkPad USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1/input1
[    5.951798] md: kicking non-fresh sdc2 from array!
[    5.955268] md/raid1:md1: active with 4 out of 4 mirrors
[    5.981506] md1: detected capacity change from 0 to 4291821568
[    6.053215] raid6: sse2x4   gen()  5293 MB/s
[    6.121253] raid6: sse2x4   xor()  3521 MB/s
[    6.189236] raid6: sse2x2   gen()  5847 MB/s
[    6.257252] raid6: sse2x2   xor()  3593 MB/s
[    6.325236] raid6: sse2x1   gen()  4794 MB/s
[    6.393252] raid6: sse2x1   xor()  2996 MB/s
[    6.393309] raid6: using algorithm sse2x2 gen() 5847 MB/s
[    6.393366] raid6: .... xor() 3593 MB/s, rmw enabled
[    6.393424] raid6: using ssse3x2 recovery algorithm
[    6.395317] xor: measuring software checksum speed
[    6.396638]    prefetch64-sse  :  7804 MB/sec
[    6.398176]    generic_sse     :  6750 MB/sec
[    6.398233] xor: using function: prefetch64-sse (7804 MB/sec)
[    6.399607] async_tx: api initialized (async)
[    6.420344] md/raid:md5: device sdb2 operational as raid disk 1
[    6.420407] md/raid:md5: device sda2 operational as raid disk 2
[    6.420466] md/raid:md5: device sde2 operational as raid disk 3
[    6.420525] md/raid:md5: device sdd2 operational as raid disk 0
[    6.422053] md/raid:md5: raid level 6 active with 4 out of 5 devices, algorithm 2
[    6.430257] random: crng init done
[    6.432876] md5: detected capacity change from 0 to 946931171328
[    6.587199] device-mapper: uevent: version 1.0.3
[    6.587433] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@xxxxxxxxxx
[    7.562991] tun: Universal TUN/TAP device driver, 1.6
[   13.142916] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   13.648365] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[   18.434262] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (INTERRUPT)
[   18.434389] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[   18.434492] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[   18.477634] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   18.477759] ACPI: Power Button [PWRB]
[   18.477907] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   18.493123] ACPI: Power Button [PWRF]
[   18.718807] iTCO_vendor_support: vendor-support=0
[   18.739026] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   18.739140] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   18.739249] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   18.739352] sd 3:0:0:0: Attached scsi generic sg3 type 0
[   18.739457] sd 5:0:0:0: Attached scsi generic sg4 type 0
[   18.842071] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   18.874859] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   18.874973] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[   20.677482] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   21.123029] MXM: GUID detected in BIOS
[   21.123543] nouveau 0000:02:00.0: vgaarb: deactivate vga console
[   21.124655] Console: switching to colour dummy device 80x25
[   21.124980] nouveau 0000:02:00.0: NVIDIA GT218 (0a8180b1)
[   21.248215] nouveau 0000:02:00.0: bios: version 70.18.5f.00.00
[   21.248981] nouveau 0000:02:00.0: fb: 512 MiB DDR3
[   21.248992] nouveau 0000:02:00.0: fb: memory controller reports 512 MiB VRAM
[   21.282835] snd_hda_intel 0000:02:00.1: Disabling MSI
[   21.282854] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[   21.335094] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input6
[   21.335209] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input7
[   21.335619] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input8
[   21.335709] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input9
[   21.413274] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   21.413287] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   21.413293] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   21.413299] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[   21.413303] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x11/0x1e
[   21.413307] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   21.413313] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[   21.413318] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[   21.413322] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   21.413327] snd_hda_codec_realtek hdaudioC0D2:    dig-in=0x1f
[   21.434424] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   21.434682] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   21.434979] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   21.435988] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   21.437961] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   21.440142] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   21.440431] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   21.441601] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   22.597357] [TTM] Zone  kernel: Available graphics memory: 12304840 KiB
[   22.597368] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[   22.597372] [TTM] Initializing pool allocator
[   22.597381] [TTM] Initializing DMA pool allocator
[   22.597407] nouveau 0000:02:00.0: DRM: VRAM: 512 MiB
[   22.597413] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[   22.597420] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[   22.597425] nouveau 0000:02:00.0: DRM: DCB version 4.0
[   22.597431] nouveau 0000:02:00.0: DRM: DCB outp 00: 01000302 00020030
[   22.597436] nouveau 0000:02:00.0: DRM: DCB outp 01: 02000300 00000000
[   22.597441] nouveau 0000:02:00.0: DRM: DCB outp 02: 02011362 00020010
[   22.597446] nouveau 0000:02:00.0: DRM: DCB outp 03: 01022310 00000000
[   22.597451] nouveau 0000:02:00.0: DRM: DCB conn 00: 00001030
[   22.597455] nouveau 0000:02:00.0: DRM: DCB conn 01: 00002161
[   22.597459] nouveau 0000:02:00.0: DRM: DCB conn 02: 00000200
[   22.600828] nouveau 0000:02:00.0: DRM: MM: using COPY for buffer copies
[   22.642046] nouveau 0000:02:00.0: DRM: allocated 1280x1024 fb: 0x70000, bo 00000000ecbc498b
[   22.642283] fbcon: nouveaudrmfb (fb0) is primary device
[   22.691362] Console: switching to colour frame buffer device 160x64
[   22.692534] nouveau 0000:02:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[   22.705699] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
[   23.409361] EXT4-fs (dm-0): re-mounted. Opts: auto_da_alloc
[   24.671663] cryptd: max_cpu_qlen set to 1000
[   25.619108] lp: driver loaded but no devices found
[   25.649297] ppdev: user-space parallel port driver
[   29.276523] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: auto_da_alloc
[   29.393269] Adding 4194300k swap on /dev/mapper/cswap.  Priority:-2 extents:1 across:4194300k FS
[   31.028495] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   31.068252] br0: port 1(em0) entered blocking state
[   31.068979] br0: port 1(em0) entered disabled state
[   31.069927] device em0 entered promiscuous mode
[   31.074399] br0: port 2(rl0) entered blocking state
[   31.075129] br0: port 2(rl0) entered disabled state
[   31.075928] device rl0 entered promiscuous mode
[   31.153093] r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-2.fw
[   31.154569] RTL8211DN Gigabit Ethernet r8169-0-400:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-0-400:00, irq=IGNORE)
[   31.433978] r8169 0000:04:00.0 rl0: Link is Down
[   31.437322] br0: port 2(rl0) entered blocking state
[   31.440530] br0: port 2(rl0) entered forwarding state
[   32.077223] br0: port 2(rl0) entered disabled state
[   34.144985] r8169 0000:04:00.0 rl0: Link is Up - 1Gbps/Full - flow control rx/tx
[   34.145748] br0: port 2(rl0) entered blocking state
[   34.148899] br0: port 2(rl0) entered forwarding state
[   34.152016] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   70.747068] kvm: KVM_SET_TSS_ADDR need to be called before entering vcpu

[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux