[PATCH v2 04/20] Update headers with Linux 6.4-rc1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Oliver Upton <oliver.upton@xxxxxxxxx>
---
 arm/aarch64/include/asm/kvm.h |  38 ++
 include/linux/kvm.h           |  55 +-
 include/linux/psci.h          |  47 ++
 include/linux/vfio.h          | 920 +++++++++++++++++++++++++++++++++-
 include/linux/vhost.h         | 186 +++----
 include/linux/virtio_blk.h    | 105 ++++
 include/linux/virtio_net.h    |   4 +
 riscv/include/asm/kvm.h       |   3 +
 x86/include/asm/kvm.h         |  50 +-
 9 files changed, 1270 insertions(+), 138 deletions(-)

diff --git a/arm/aarch64/include/asm/kvm.h b/arm/aarch64/include/asm/kvm.h
index 316917b..f7ddd73 100644
--- a/arm/aarch64/include/asm/kvm.h
+++ b/arm/aarch64/include/asm/kvm.h
@@ -43,6 +43,7 @@
 #define __KVM_HAVE_VCPU_EVENTS
 
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+#define KVM_DIRTY_LOG_PAGE_OFFSET 64
 
 #define KVM_REG_SIZE(id)						\
 	(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
@@ -108,6 +109,7 @@ struct kvm_regs {
 #define KVM_ARM_VCPU_SVE		4 /* enable SVE for this CPU */
 #define KVM_ARM_VCPU_PTRAUTH_ADDRESS	5 /* VCPU uses address authentication */
 #define KVM_ARM_VCPU_PTRAUTH_GENERIC	6 /* VCPU uses generic authentication */
+#define KVM_ARM_VCPU_HAS_EL2		7 /* Support nested virtualization */
 
 struct kvm_vcpu_init {
 	__u32 target;
@@ -196,6 +198,15 @@ struct kvm_arm_copy_mte_tags {
 	__u64 reserved[2];
 };
 
+/*
+ * Counter/Timer offset structure. Describe the virtual/physical offset.
+ * To be used with KVM_ARM_SET_COUNTER_OFFSET.
+ */
+struct kvm_arm_counter_offset {
+	__u64 counter_offset;
+	__u64 reserved;
+};
+
 #define KVM_ARM_TAGS_TO_GUEST		0
 #define KVM_ARM_TAGS_FROM_GUEST		1
 
@@ -370,6 +381,10 @@ enum {
 #endif
 };
 
+/* Device Control API on vm fd */
+#define KVM_ARM_VM_SMCCC_CTRL		0
+#define   KVM_ARM_VM_SMCCC_FILTER	0
+
 /* Device Control API: ARM VGIC */
 #define KVM_DEV_ARM_VGIC_GRP_ADDR	0
 #define KVM_DEV_ARM_VGIC_GRP_DIST_REGS	1
@@ -409,6 +424,8 @@ enum {
 #define KVM_ARM_VCPU_TIMER_CTRL		1
 #define   KVM_ARM_VCPU_TIMER_IRQ_VTIMER		0
 #define   KVM_ARM_VCPU_TIMER_IRQ_PTIMER		1
+#define   KVM_ARM_VCPU_TIMER_IRQ_HVTIMER	2
+#define   KVM_ARM_VCPU_TIMER_IRQ_HPTIMER	3
 #define KVM_ARM_VCPU_PVTIME_CTRL	2
 #define   KVM_ARM_VCPU_PVTIME_IPA	0
 
@@ -467,6 +484,27 @@ enum {
 /* run->fail_entry.hardware_entry_failure_reason codes. */
 #define KVM_EXIT_FAIL_ENTRY_CPU_UNSUPPORTED	(1ULL << 0)
 
+enum kvm_smccc_filter_action {
+	KVM_SMCCC_FILTER_HANDLE = 0,
+	KVM_SMCCC_FILTER_DENY,
+	KVM_SMCCC_FILTER_FWD_TO_USER,
+
+#ifdef __KERNEL__
+	NR_SMCCC_FILTER_ACTIONS
+#endif
+};
+
+struct kvm_smccc_filter {
+	__u32 base;
+	__u32 nr_functions;
+	__u8 action;
+	__u8 pad[15];
+};
+
+/* arm64-specific KVM_EXIT_HYPERCALL flags */
+#define KVM_HYPERCALL_EXIT_SMC		(1U << 0)
+#define KVM_HYPERCALL_EXIT_16BIT	(1U << 1)
+
 #endif
 
 #endif /* __ARM_KVM_H__ */
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 0d5d441..16287a9 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -86,14 +86,6 @@ struct kvm_debug_guest {
 /* *** End of deprecated interfaces *** */
 
 
-/* for KVM_CREATE_MEMORY_REGION */
-struct kvm_memory_region {
-	__u32 slot;
-	__u32 flags;
-	__u64 guest_phys_addr;
-	__u64 memory_size; /* bytes */
-};
-
 /* for KVM_SET_USER_MEMORY_REGION */
 struct kvm_userspace_memory_region {
 	__u32 slot;
@@ -104,9 +96,9 @@ struct kvm_userspace_memory_region {
 };
 
 /*
- * The bit 0 ~ bit 15 of kvm_memory_region::flags are visible for userspace,
- * other bits are reserved for kvm internal use which are defined in
- * include/linux/kvm_host.h.
+ * The bit 0 ~ bit 15 of kvm_userspace_memory_region::flags are visible for
+ * userspace, other bits are reserved for kvm internal use which are defined
+ * in include/linux/kvm_host.h.
  */
 #define KVM_MEM_LOG_DIRTY_PAGES	(1UL << 0)
 #define KVM_MEM_READONLY	(1UL << 1)
@@ -349,8 +341,13 @@ struct kvm_run {
 			__u64 nr;
 			__u64 args[6];
 			__u64 ret;
-			__u32 longmode;
-			__u32 pad;
+
+			union {
+#ifndef __KERNEL__
+				__u32 longmode;
+#endif
+				__u64 flags;
+			};
 		} hypercall;
 		/* KVM_EXIT_TPR_ACCESS */
 		struct {
@@ -485,6 +482,9 @@ struct kvm_run {
 #define KVM_MSR_EXIT_REASON_INVAL	(1 << 0)
 #define KVM_MSR_EXIT_REASON_UNKNOWN	(1 << 1)
 #define KVM_MSR_EXIT_REASON_FILTER	(1 << 2)
+#define KVM_MSR_EXIT_REASON_VALID_MASK	(KVM_MSR_EXIT_REASON_INVAL   |	\
+					 KVM_MSR_EXIT_REASON_UNKNOWN |	\
+					 KVM_MSR_EXIT_REASON_FILTER)
 			__u32 reason; /* kernel -> user */
 			__u32 index; /* kernel -> user */
 			__u64 data; /* kernel <-> user */
@@ -588,6 +588,8 @@ struct kvm_s390_mem_op {
 		struct {
 			__u8 ar;	/* the access register number */
 			__u8 key;	/* access key, ignored if flag unset */
+			__u8 pad1[6];	/* ignored */
+			__u64 old_addr;	/* ignored if cmpxchg flag unset */
 		};
 		__u32 sida_offset; /* offset into the sida */
 		__u8 reserved[32]; /* ignored */
@@ -600,11 +602,17 @@ struct kvm_s390_mem_op {
 #define KVM_S390_MEMOP_SIDA_WRITE	3
 #define KVM_S390_MEMOP_ABSOLUTE_READ	4
 #define KVM_S390_MEMOP_ABSOLUTE_WRITE	5
+#define KVM_S390_MEMOP_ABSOLUTE_CMPXCHG	6
+
 /* flags for kvm_s390_mem_op->flags */
 #define KVM_S390_MEMOP_F_CHECK_ONLY		(1ULL << 0)
 #define KVM_S390_MEMOP_F_INJECT_EXCEPTION	(1ULL << 1)
 #define KVM_S390_MEMOP_F_SKEY_PROTECTION	(1ULL << 2)
 
+/* flags specifying extension support via KVM_CAP_S390_MEM_OP_EXTENSION */
+#define KVM_S390_MEMOP_EXTENSION_CAP_BASE	(1 << 0)
+#define KVM_S390_MEMOP_EXTENSION_CAP_CMPXCHG	(1 << 1)
+
 /* for KVM_INTERRUPT */
 struct kvm_interrupt {
 	/* in */
@@ -1178,6 +1186,10 @@ struct kvm_ppc_resize_hpt {
 #define KVM_CAP_S390_ZPCI_OP 221
 #define KVM_CAP_S390_CPU_TOPOLOGY 222
 #define KVM_CAP_DIRTY_LOG_RING_ACQ_REL 223
+#define KVM_CAP_S390_PROTECTED_ASYNC_DISABLE 224
+#define KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP 225
+#define KVM_CAP_PMU_EVENT_MASKED_EVENTS 226
+#define KVM_CAP_COUNTER_OFFSET 227
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
@@ -1267,6 +1279,7 @@ struct kvm_x86_mce {
 #define KVM_XEN_HVM_CONFIG_RUNSTATE		(1 << 3)
 #define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL	(1 << 4)
 #define KVM_XEN_HVM_CONFIG_EVTCHN_SEND		(1 << 5)
+#define KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG	(1 << 6)
 
 struct kvm_xen_hvm_config {
 	__u32 flags;
@@ -1437,18 +1450,12 @@ struct kvm_vfio_spapr_tce {
 	__s32	tablefd;
 };
 
-/*
- * ioctls for VM fds
- */
-#define KVM_SET_MEMORY_REGION     _IOW(KVMIO,  0x40, struct kvm_memory_region)
 /*
  * KVM_CREATE_VCPU receives as a parameter the vcpu slot, and returns
  * a vcpu fd.
  */
 #define KVM_CREATE_VCPU           _IO(KVMIO,   0x41)
 #define KVM_GET_DIRTY_LOG         _IOW(KVMIO,  0x42, struct kvm_dirty_log)
-/* KVM_SET_MEMORY_ALIAS is obsolete: */
-#define KVM_SET_MEMORY_ALIAS      _IOW(KVMIO,  0x43, struct kvm_memory_alias)
 #define KVM_SET_NR_MMU_PAGES      _IO(KVMIO,   0x44)
 #define KVM_GET_NR_MMU_PAGES      _IO(KVMIO,   0x45)
 #define KVM_SET_USER_MEMORY_REGION _IOW(KVMIO, 0x46, \
@@ -1542,6 +1549,8 @@ struct kvm_s390_ucas_mapping {
 #define KVM_SET_PMU_EVENT_FILTER  _IOW(KVMIO,  0xb2, struct kvm_pmu_event_filter)
 #define KVM_PPC_SVM_OFF		  _IO(KVMIO,  0xb3)
 #define KVM_ARM_MTE_COPY_TAGS	  _IOR(KVMIO,  0xb4, struct kvm_arm_copy_mte_tags)
+/* Available with KVM_CAP_COUNTER_OFFSET */
+#define KVM_ARM_SET_COUNTER_OFFSET _IOW(KVMIO,  0xb5, struct kvm_arm_counter_offset)
 
 /* ioctl for vm fd */
 #define KVM_CREATE_DEVICE	  _IOWR(KVMIO,  0xe0, struct kvm_create_device)
@@ -1740,6 +1749,8 @@ enum pv_cmd_id {
 	KVM_PV_UNSHARE_ALL,
 	KVM_PV_INFO,
 	KVM_PV_DUMP,
+	KVM_PV_ASYNC_CLEANUP_PREPARE,
+	KVM_PV_ASYNC_CLEANUP_PERFORM,
 };
 
 struct kvm_pv_cmd {
@@ -1770,8 +1781,10 @@ struct kvm_xen_hvm_attr {
 	union {
 		__u8 long_mode;
 		__u8 vector;
+		__u8 runstate_update_flag;
 		struct {
 			__u64 gfn;
+#define KVM_XEN_INVALID_GFN ((__u64)-1)
 		} shared_info;
 		struct {
 			__u32 send_port;
@@ -1803,6 +1816,7 @@ struct kvm_xen_hvm_attr {
 	} u;
 };
 
+
 /* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO */
 #define KVM_XEN_ATTR_TYPE_LONG_MODE		0x0
 #define KVM_XEN_ATTR_TYPE_SHARED_INFO		0x1
@@ -1810,6 +1824,8 @@ struct kvm_xen_hvm_attr {
 /* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */
 #define KVM_XEN_ATTR_TYPE_EVTCHN		0x3
 #define KVM_XEN_ATTR_TYPE_XEN_VERSION		0x4
+/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG */
+#define KVM_XEN_ATTR_TYPE_RUNSTATE_UPDATE_FLAG	0x5
 
 /* Per-vCPU Xen attributes */
 #define KVM_XEN_VCPU_GET_ATTR	_IOWR(KVMIO, 0xca, struct kvm_xen_vcpu_attr)
@@ -1826,6 +1842,7 @@ struct kvm_xen_vcpu_attr {
 	__u16 pad[3];
 	union {
 		__u64 gpa;
+#define KVM_XEN_INVALID_GPA ((__u64)-1)
 		__u64 pad[8];
 		struct {
 			__u64 state;
diff --git a/include/linux/psci.h b/include/linux/psci.h
index 310d83e..42a40ad 100644
--- a/include/linux/psci.h
+++ b/include/linux/psci.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
 /*
  * ARM Power State and Coordination Interface (PSCI) header
  *
@@ -46,6 +47,28 @@
 #define PSCI_0_2_FN64_MIGRATE			PSCI_0_2_FN64(5)
 #define PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU	PSCI_0_2_FN64(7)
 
+#define PSCI_1_0_FN_PSCI_FEATURES		PSCI_0_2_FN(10)
+#define PSCI_1_0_FN_CPU_FREEZE			PSCI_0_2_FN(11)
+#define PSCI_1_0_FN_CPU_DEFAULT_SUSPEND		PSCI_0_2_FN(12)
+#define PSCI_1_0_FN_NODE_HW_STATE		PSCI_0_2_FN(13)
+#define PSCI_1_0_FN_SYSTEM_SUSPEND		PSCI_0_2_FN(14)
+#define PSCI_1_0_FN_SET_SUSPEND_MODE		PSCI_0_2_FN(15)
+#define PSCI_1_0_FN_STAT_RESIDENCY		PSCI_0_2_FN(16)
+#define PSCI_1_0_FN_STAT_COUNT			PSCI_0_2_FN(17)
+
+#define PSCI_1_1_FN_SYSTEM_RESET2		PSCI_0_2_FN(18)
+#define PSCI_1_1_FN_MEM_PROTECT			PSCI_0_2_FN(19)
+#define PSCI_1_1_FN_MEM_PROTECT_CHECK_RANGE	PSCI_0_2_FN(20)
+
+#define PSCI_1_0_FN64_CPU_DEFAULT_SUSPEND	PSCI_0_2_FN64(12)
+#define PSCI_1_0_FN64_NODE_HW_STATE		PSCI_0_2_FN64(13)
+#define PSCI_1_0_FN64_SYSTEM_SUSPEND		PSCI_0_2_FN64(14)
+#define PSCI_1_0_FN64_STAT_RESIDENCY		PSCI_0_2_FN64(16)
+#define PSCI_1_0_FN64_STAT_COUNT		PSCI_0_2_FN64(17)
+
+#define PSCI_1_1_FN64_SYSTEM_RESET2		PSCI_0_2_FN64(18)
+#define PSCI_1_1_FN64_MEM_PROTECT_CHECK_RANGE	PSCI_0_2_FN64(20)
+
 /* PSCI v0.2 power state encoding for CPU_SUSPEND function */
 #define PSCI_0_2_POWER_STATE_ID_MASK		0xffff
 #define PSCI_0_2_POWER_STATE_ID_SHIFT		0
@@ -56,6 +79,13 @@
 #define PSCI_0_2_POWER_STATE_AFFL_MASK		\
 				(0x3 << PSCI_0_2_POWER_STATE_AFFL_SHIFT)
 
+/* PSCI extended power state encoding for CPU_SUSPEND function */
+#define PSCI_1_0_EXT_POWER_STATE_ID_MASK	0xfffffff
+#define PSCI_1_0_EXT_POWER_STATE_ID_SHIFT	0
+#define PSCI_1_0_EXT_POWER_STATE_TYPE_SHIFT	30
+#define PSCI_1_0_EXT_POWER_STATE_TYPE_MASK	\
+				(0x1 << PSCI_1_0_EXT_POWER_STATE_TYPE_SHIFT)
+
 /* PSCI v0.2 affinity level state returned by AFFINITY_INFO */
 #define PSCI_0_2_AFFINITY_LEVEL_ON		0
 #define PSCI_0_2_AFFINITY_LEVEL_OFF		1
@@ -66,6 +96,10 @@
 #define PSCI_0_2_TOS_UP_NO_MIGRATE		1
 #define PSCI_0_2_TOS_MP				2
 
+/* PSCI v1.1 reset type encoding for SYSTEM_RESET2 */
+#define PSCI_1_1_RESET_TYPE_SYSTEM_WARM_RESET	0
+#define PSCI_1_1_RESET_TYPE_VENDOR_START	0x80000000U
+
 /* PSCI version decoding (independent of PSCI version) */
 #define PSCI_VERSION_MAJOR_SHIFT		16
 #define PSCI_VERSION_MINOR_MASK			\
@@ -75,6 +109,18 @@
 		(((ver) & PSCI_VERSION_MAJOR_MASK) >> PSCI_VERSION_MAJOR_SHIFT)
 #define PSCI_VERSION_MINOR(ver)			\
 		((ver) & PSCI_VERSION_MINOR_MASK)
+#define PSCI_VERSION(maj, min)						\
+	((((maj) << PSCI_VERSION_MAJOR_SHIFT) & PSCI_VERSION_MAJOR_MASK) | \
+	 ((min) & PSCI_VERSION_MINOR_MASK))
+
+/* PSCI features decoding (>=1.0) */
+#define PSCI_1_0_FEATURES_CPU_SUSPEND_PF_SHIFT	1
+#define PSCI_1_0_FEATURES_CPU_SUSPEND_PF_MASK	\
+			(0x1 << PSCI_1_0_FEATURES_CPU_SUSPEND_PF_SHIFT)
+
+#define PSCI_1_0_OS_INITIATED			BIT(0)
+#define PSCI_1_0_SUSPEND_MODE_PC		0
+#define PSCI_1_0_SUSPEND_MODE_OSI		1
 
 /* PSCI return values (inclusive of all PSCI versions) */
 #define PSCI_RET_SUCCESS			0
@@ -86,5 +132,6 @@
 #define PSCI_RET_INTERNAL_FAILURE		-6
 #define PSCI_RET_NOT_PRESENT			-7
 #define PSCI_RET_DISABLED			-8
+#define PSCI_RET_INVALID_ADDRESS		-9
 
 #endif /* _UAPI_LINUX_PSCI_H */
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index 4e7ab4c..0552e8d 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
 /*
  * VFIO API definition
  *
@@ -8,8 +9,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifndef VFIO_H
-#define VFIO_H
+#ifndef _UAPIVFIO_H
+#define _UAPIVFIO_H
 
 #include <linux/types.h>
 #include <linux/ioctl.h>
@@ -45,6 +46,16 @@
  */
 #define VFIO_NOIOMMU_IOMMU		8
 
+/* Supports VFIO_DMA_UNMAP_FLAG_ALL */
+#define VFIO_UNMAP_ALL			9
+
+/*
+ * Supports the vaddr flag for DMA map and unmap.  Not supported for mediated
+ * devices, so this capability is subject to change as groups are added or
+ * removed.
+ */
+#define VFIO_UPDATE_VADDR		10
+
 /*
  * The IOCTL interface is designed for extensibility by embedding the
  * structure length (argsz) and flags into structures passed between
@@ -199,8 +210,12 @@ struct vfio_device_info {
 #define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2)	/* vfio-platform device */
 #define VFIO_DEVICE_FLAGS_AMBA  (1 << 3)	/* vfio-amba device */
 #define VFIO_DEVICE_FLAGS_CCW	(1 << 4)	/* vfio-ccw device */
+#define VFIO_DEVICE_FLAGS_AP	(1 << 5)	/* vfio-ap device */
+#define VFIO_DEVICE_FLAGS_FSL_MC (1 << 6)	/* vfio-fsl-mc device */
+#define VFIO_DEVICE_FLAGS_CAPS	(1 << 7)	/* Info supports caps */
 	__u32	num_regions;	/* Max region index + 1 */
 	__u32	num_irqs;	/* Max IRQ index + 1 */
+	__u32   cap_offset;	/* Offset within info struct of first cap */
 };
 #define VFIO_DEVICE_GET_INFO		_IO(VFIO_TYPE, VFIO_BASE + 7)
 
@@ -214,6 +229,16 @@ struct vfio_device_info {
 #define VFIO_DEVICE_API_PLATFORM_STRING		"vfio-platform"
 #define VFIO_DEVICE_API_AMBA_STRING		"vfio-amba"
 #define VFIO_DEVICE_API_CCW_STRING		"vfio-ccw"
+#define VFIO_DEVICE_API_AP_STRING		"vfio-ap"
+
+/*
+ * The following capabilities are unique to s390 zPCI devices.  Their contents
+ * are further-defined in vfio_zdev.h
+ */
+#define VFIO_DEVICE_INFO_CAP_ZPCI_BASE		1
+#define VFIO_DEVICE_INFO_CAP_ZPCI_GROUP		2
+#define VFIO_DEVICE_INFO_CAP_ZPCI_UTIL		3
+#define VFIO_DEVICE_INFO_CAP_ZPCI_PFIP		4
 
 /**
  * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
@@ -292,14 +317,169 @@ struct vfio_region_info_cap_type {
 	__u32 subtype;	/* type specific */
 };
 
+/*
+ * List of region types, global per bus driver.
+ * If you introduce a new type, please add it here.
+ */
+
+/* PCI region type containing a PCI vendor part */
 #define VFIO_REGION_TYPE_PCI_VENDOR_TYPE	(1 << 31)
 #define VFIO_REGION_TYPE_PCI_VENDOR_MASK	(0xffff)
+#define VFIO_REGION_TYPE_GFX                    (1)
+#define VFIO_REGION_TYPE_CCW			(2)
+#define VFIO_REGION_TYPE_MIGRATION_DEPRECATED   (3)
 
-/* 8086 Vendor sub-types */
+/* sub-types for VFIO_REGION_TYPE_PCI_* */
+
+/* 8086 vendor PCI sub-types */
 #define VFIO_REGION_SUBTYPE_INTEL_IGD_OPREGION	(1)
 #define VFIO_REGION_SUBTYPE_INTEL_IGD_HOST_CFG	(2)
 #define VFIO_REGION_SUBTYPE_INTEL_IGD_LPC_CFG	(3)
 
+/* 10de vendor PCI sub-types */
+/*
+ * NVIDIA GPU NVlink2 RAM is coherent RAM mapped onto the host address space.
+ *
+ * Deprecated, region no longer provided
+ */
+#define VFIO_REGION_SUBTYPE_NVIDIA_NVLINK2_RAM	(1)
+
+/* 1014 vendor PCI sub-types */
+/*
+ * IBM NPU NVlink2 ATSD (Address Translation Shootdown) register of NPU
+ * to do TLB invalidation on a GPU.
+ *
+ * Deprecated, region no longer provided
+ */
+#define VFIO_REGION_SUBTYPE_IBM_NVLINK2_ATSD	(1)
+
+/* sub-types for VFIO_REGION_TYPE_GFX */
+#define VFIO_REGION_SUBTYPE_GFX_EDID            (1)
+
+/**
+ * struct vfio_region_gfx_edid - EDID region layout.
+ *
+ * Set display link state and EDID blob.
+ *
+ * The EDID blob has monitor information such as brand, name, serial
+ * number, physical size, supported video modes and more.
+ *
+ * This special region allows userspace (typically qemu) set a virtual
+ * EDID for the virtual monitor, which allows a flexible display
+ * configuration.
+ *
+ * For the edid blob spec look here:
+ *    https://en.wikipedia.org/wiki/Extended_Display_Identification_Data
+ *
+ * On linux systems you can find the EDID blob in sysfs:
+ *    /sys/class/drm/${card}/${connector}/edid
+ *
+ * You can use the edid-decode ulility (comes with xorg-x11-utils) to
+ * decode the EDID blob.
+ *
+ * @edid_offset: location of the edid blob, relative to the
+ *               start of the region (readonly).
+ * @edid_max_size: max size of the edid blob (readonly).
+ * @edid_size: actual edid size (read/write).
+ * @link_state: display link state (read/write).
+ * VFIO_DEVICE_GFX_LINK_STATE_UP: Monitor is turned on.
+ * VFIO_DEVICE_GFX_LINK_STATE_DOWN: Monitor is turned off.
+ * @max_xres: max display width (0 == no limitation, readonly).
+ * @max_yres: max display height (0 == no limitation, readonly).
+ *
+ * EDID update protocol:
+ *   (1) set link-state to down.
+ *   (2) update edid blob and size.
+ *   (3) set link-state to up.
+ */
+struct vfio_region_gfx_edid {
+	__u32 edid_offset;
+	__u32 edid_max_size;
+	__u32 edid_size;
+	__u32 max_xres;
+	__u32 max_yres;
+	__u32 link_state;
+#define VFIO_DEVICE_GFX_LINK_STATE_UP    1
+#define VFIO_DEVICE_GFX_LINK_STATE_DOWN  2
+};
+
+/* sub-types for VFIO_REGION_TYPE_CCW */
+#define VFIO_REGION_SUBTYPE_CCW_ASYNC_CMD	(1)
+#define VFIO_REGION_SUBTYPE_CCW_SCHIB		(2)
+#define VFIO_REGION_SUBTYPE_CCW_CRW		(3)
+
+/* sub-types for VFIO_REGION_TYPE_MIGRATION */
+#define VFIO_REGION_SUBTYPE_MIGRATION_DEPRECATED (1)
+
+struct vfio_device_migration_info {
+	__u32 device_state;         /* VFIO device state */
+#define VFIO_DEVICE_STATE_V1_STOP      (0)
+#define VFIO_DEVICE_STATE_V1_RUNNING   (1 << 0)
+#define VFIO_DEVICE_STATE_V1_SAVING    (1 << 1)
+#define VFIO_DEVICE_STATE_V1_RESUMING  (1 << 2)
+#define VFIO_DEVICE_STATE_MASK      (VFIO_DEVICE_STATE_V1_RUNNING | \
+				     VFIO_DEVICE_STATE_V1_SAVING |  \
+				     VFIO_DEVICE_STATE_V1_RESUMING)
+
+#define VFIO_DEVICE_STATE_VALID(state) \
+	(state & VFIO_DEVICE_STATE_V1_RESUMING ? \
+	(state & VFIO_DEVICE_STATE_MASK) == VFIO_DEVICE_STATE_V1_RESUMING : 1)
+
+#define VFIO_DEVICE_STATE_IS_ERROR(state) \
+	((state & VFIO_DEVICE_STATE_MASK) == (VFIO_DEVICE_STATE_V1_SAVING | \
+					      VFIO_DEVICE_STATE_V1_RESUMING))
+
+#define VFIO_DEVICE_STATE_SET_ERROR(state) \
+	((state & ~VFIO_DEVICE_STATE_MASK) | VFIO_DEVICE_STATE_V1_SAVING | \
+					     VFIO_DEVICE_STATE_V1_RESUMING)
+
+	__u32 reserved;
+	__u64 pending_bytes;
+	__u64 data_offset;
+	__u64 data_size;
+};
+
+/*
+ * The MSIX mappable capability informs that MSIX data of a BAR can be mmapped
+ * which allows direct access to non-MSIX registers which happened to be within
+ * the same system page.
+ *
+ * Even though the userspace gets direct access to the MSIX data, the existing
+ * VFIO_DEVICE_SET_IRQS interface must still be used for MSIX configuration.
+ */
+#define VFIO_REGION_INFO_CAP_MSIX_MAPPABLE	3
+
+/*
+ * Capability with compressed real address (aka SSA - small system address)
+ * where GPU RAM is mapped on a system bus. Used by a GPU for DMA routing
+ * and by the userspace to associate a NVLink bridge with a GPU.
+ *
+ * Deprecated, capability no longer provided
+ */
+#define VFIO_REGION_INFO_CAP_NVLINK2_SSATGT	4
+
+struct vfio_region_info_cap_nvlink2_ssatgt {
+	struct vfio_info_cap_header header;
+	__u64 tgt;
+};
+
+/*
+ * Capability with an NVLink link speed. The value is read by
+ * the NVlink2 bridge driver from the bridge's "ibm,nvlink-speed"
+ * property in the device tree. The value is fixed in the hardware
+ * and failing to provide the correct value results in the link
+ * not working with no indication from the driver why.
+ *
+ * Deprecated, capability no longer provided
+ */
+#define VFIO_REGION_INFO_CAP_NVLINK2_LNKSPD	5
+
+struct vfio_region_info_cap_nvlink2_lnkspd {
+	struct vfio_info_cap_header header;
+	__u32 link_speed;
+	__u32 __pad;
+};
+
 /**
  * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9,
  *				    struct vfio_irq_info)
@@ -461,11 +641,13 @@ enum {
 
 enum {
 	VFIO_CCW_IO_IRQ_INDEX,
+	VFIO_CCW_CRW_IRQ_INDEX,
+	VFIO_CCW_REQ_IRQ_INDEX,
 	VFIO_CCW_NUM_IRQS
 };
 
 /**
- * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IORW(VFIO_TYPE, VFIO_BASE + 12,
+ * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12,
  *					      struct vfio_pci_hot_reset_info)
  *
  * Return: 0 on success, -errno on failure:
@@ -502,6 +684,582 @@ struct vfio_pci_hot_reset {
 
 #define VFIO_DEVICE_PCI_HOT_RESET	_IO(VFIO_TYPE, VFIO_BASE + 13)
 
+/**
+ * VFIO_DEVICE_QUERY_GFX_PLANE - _IOW(VFIO_TYPE, VFIO_BASE + 14,
+ *                                    struct vfio_device_query_gfx_plane)
+ *
+ * Set the drm_plane_type and flags, then retrieve the gfx plane info.
+ *
+ * flags supported:
+ * - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_DMABUF are set
+ *   to ask if the mdev supports dma-buf. 0 on support, -EINVAL on no
+ *   support for dma-buf.
+ * - VFIO_GFX_PLANE_TYPE_PROBE and VFIO_GFX_PLANE_TYPE_REGION are set
+ *   to ask if the mdev supports region. 0 on support, -EINVAL on no
+ *   support for region.
+ * - VFIO_GFX_PLANE_TYPE_DMABUF or VFIO_GFX_PLANE_TYPE_REGION is set
+ *   with each call to query the plane info.
+ * - Others are invalid and return -EINVAL.
+ *
+ * Note:
+ * 1. Plane could be disabled by guest. In that case, success will be
+ *    returned with zero-initialized drm_format, size, width and height
+ *    fields.
+ * 2. x_hot/y_hot is set to 0xFFFFFFFF if no hotspot information available
+ *
+ * Return: 0 on success, -errno on other failure.
+ */
+struct vfio_device_gfx_plane_info {
+	__u32 argsz;
+	__u32 flags;
+#define VFIO_GFX_PLANE_TYPE_PROBE (1 << 0)
+#define VFIO_GFX_PLANE_TYPE_DMABUF (1 << 1)
+#define VFIO_GFX_PLANE_TYPE_REGION (1 << 2)
+	/* in */
+	__u32 drm_plane_type;	/* type of plane: DRM_PLANE_TYPE_* */
+	/* out */
+	__u32 drm_format;	/* drm format of plane */
+	__u64 drm_format_mod;   /* tiled mode */
+	__u32 width;	/* width of plane */
+	__u32 height;	/* height of plane */
+	__u32 stride;	/* stride of plane */
+	__u32 size;	/* size of plane in bytes, align on page*/
+	__u32 x_pos;	/* horizontal position of cursor plane */
+	__u32 y_pos;	/* vertical position of cursor plane*/
+	__u32 x_hot;    /* horizontal position of cursor hotspot */
+	__u32 y_hot;    /* vertical position of cursor hotspot */
+	union {
+		__u32 region_index;	/* region index */
+		__u32 dmabuf_id;	/* dma-buf id */
+	};
+};
+
+#define VFIO_DEVICE_QUERY_GFX_PLANE _IO(VFIO_TYPE, VFIO_BASE + 14)
+
+/**
+ * VFIO_DEVICE_GET_GFX_DMABUF - _IOW(VFIO_TYPE, VFIO_BASE + 15, __u32)
+ *
+ * Return a new dma-buf file descriptor for an exposed guest framebuffer
+ * described by the provided dmabuf_id. The dmabuf_id is returned from VFIO_
+ * DEVICE_QUERY_GFX_PLANE as a token of the exposed guest framebuffer.
+ */
+
+#define VFIO_DEVICE_GET_GFX_DMABUF _IO(VFIO_TYPE, VFIO_BASE + 15)
+
+/**
+ * VFIO_DEVICE_IOEVENTFD - _IOW(VFIO_TYPE, VFIO_BASE + 16,
+ *                              struct vfio_device_ioeventfd)
+ *
+ * Perform a write to the device at the specified device fd offset, with
+ * the specified data and width when the provided eventfd is triggered.
+ * vfio bus drivers may not support this for all regions, for all widths,
+ * or at all.  vfio-pci currently only enables support for BAR regions,
+ * excluding the MSI-X vector table.
+ *
+ * Return: 0 on success, -errno on failure.
+ */
+struct vfio_device_ioeventfd {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_DEVICE_IOEVENTFD_8		(1 << 0) /* 1-byte write */
+#define VFIO_DEVICE_IOEVENTFD_16	(1 << 1) /* 2-byte write */
+#define VFIO_DEVICE_IOEVENTFD_32	(1 << 2) /* 4-byte write */
+#define VFIO_DEVICE_IOEVENTFD_64	(1 << 3) /* 8-byte write */
+#define VFIO_DEVICE_IOEVENTFD_SIZE_MASK	(0xf)
+	__u64	offset;			/* device fd offset of write */
+	__u64	data;			/* data to be written */
+	__s32	fd;			/* -1 for de-assignment */
+};
+
+#define VFIO_DEVICE_IOEVENTFD		_IO(VFIO_TYPE, VFIO_BASE + 16)
+
+/**
+ * VFIO_DEVICE_FEATURE - _IOWR(VFIO_TYPE, VFIO_BASE + 17,
+ *			       struct vfio_device_feature)
+ *
+ * Get, set, or probe feature data of the device.  The feature is selected
+ * using the FEATURE_MASK portion of the flags field.  Support for a feature
+ * can be probed by setting both the FEATURE_MASK and PROBE bits.  A probe
+ * may optionally include the GET and/or SET bits to determine read vs write
+ * access of the feature respectively.  Probing a feature will return success
+ * if the feature is supported and all of the optionally indicated GET/SET
+ * methods are supported.  The format of the data portion of the structure is
+ * specific to the given feature.  The data portion is not required for
+ * probing.  GET and SET are mutually exclusive, except for use with PROBE.
+ *
+ * Return 0 on success, -errno on failure.
+ */
+struct vfio_device_feature {
+	__u32	argsz;
+	__u32	flags;
+#define VFIO_DEVICE_FEATURE_MASK	(0xffff) /* 16-bit feature index */
+#define VFIO_DEVICE_FEATURE_GET		(1 << 16) /* Get feature into data[] */
+#define VFIO_DEVICE_FEATURE_SET		(1 << 17) /* Set feature from data[] */
+#define VFIO_DEVICE_FEATURE_PROBE	(1 << 18) /* Probe feature support */
+	__u8	data[];
+};
+
+#define VFIO_DEVICE_FEATURE		_IO(VFIO_TYPE, VFIO_BASE + 17)
+
+/*
+ * Provide support for setting a PCI VF Token, which is used as a shared
+ * secret between PF and VF drivers.  This feature may only be set on a
+ * PCI SR-IOV PF when SR-IOV is enabled on the PF and there are no existing
+ * open VFs.  Data provided when setting this feature is a 16-byte array
+ * (__u8 b[16]), representing a UUID.
+ */
+#define VFIO_DEVICE_FEATURE_PCI_VF_TOKEN	(0)
+
+/*
+ * Indicates the device can support the migration API through
+ * VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE. If this GET succeeds, the RUNNING and
+ * ERROR states are always supported. Support for additional states is
+ * indicated via the flags field; at least VFIO_MIGRATION_STOP_COPY must be
+ * set.
+ *
+ * VFIO_MIGRATION_STOP_COPY means that STOP, STOP_COPY and
+ * RESUMING are supported.
+ *
+ * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P means that RUNNING_P2P
+ * is supported in addition to the STOP_COPY states.
+ *
+ * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_PRE_COPY means that
+ * PRE_COPY is supported in addition to the STOP_COPY states.
+ *
+ * VFIO_MIGRATION_STOP_COPY | VFIO_MIGRATION_P2P | VFIO_MIGRATION_PRE_COPY
+ * means that RUNNING_P2P, PRE_COPY and PRE_COPY_P2P are supported
+ * in addition to the STOP_COPY states.
+ *
+ * Other combinations of flags have behavior to be defined in the future.
+ */
+struct vfio_device_feature_migration {
+	__aligned_u64 flags;
+#define VFIO_MIGRATION_STOP_COPY	(1 << 0)
+#define VFIO_MIGRATION_P2P		(1 << 1)
+#define VFIO_MIGRATION_PRE_COPY		(1 << 2)
+};
+#define VFIO_DEVICE_FEATURE_MIGRATION 1
+
+/*
+ * Upon VFIO_DEVICE_FEATURE_SET, execute a migration state change on the VFIO
+ * device. The new state is supplied in device_state, see enum
+ * vfio_device_mig_state for details
+ *
+ * The kernel migration driver must fully transition the device to the new state
+ * value before the operation returns to the user.
+ *
+ * The kernel migration driver must not generate asynchronous device state
+ * transitions outside of manipulation by the user or the VFIO_DEVICE_RESET
+ * ioctl as described above.
+ *
+ * If this function fails then current device_state may be the original
+ * operating state or some other state along the combination transition path.
+ * The user can then decide if it should execute a VFIO_DEVICE_RESET, attempt
+ * to return to the original state, or attempt to return to some other state
+ * such as RUNNING or STOP.
+ *
+ * If the new_state starts a new data transfer session then the FD associated
+ * with that session is returned in data_fd. The user is responsible to close
+ * this FD when it is finished. The user must consider the migration data stream
+ * carried over the FD to be opaque and must preserve the byte order of the
+ * stream. The user is not required to preserve buffer segmentation when writing
+ * the data stream during the RESUMING operation.
+ *
+ * Upon VFIO_DEVICE_FEATURE_GET, get the current migration state of the VFIO
+ * device, data_fd will be -1.
+ */
+struct vfio_device_feature_mig_state {
+	__u32 device_state; /* From enum vfio_device_mig_state */
+	__s32 data_fd;
+};
+#define VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE 2
+
+/*
+ * The device migration Finite State Machine is described by the enum
+ * vfio_device_mig_state. Some of the FSM arcs will create a migration data
+ * transfer session by returning a FD, in this case the migration data will
+ * flow over the FD using read() and write() as discussed below.
+ *
+ * There are 5 states to support VFIO_MIGRATION_STOP_COPY:
+ *  RUNNING - The device is running normally
+ *  STOP - The device does not change the internal or external state
+ *  STOP_COPY - The device internal state can be read out
+ *  RESUMING - The device is stopped and is loading a new internal state
+ *  ERROR - The device has failed and must be reset
+ *
+ * And optional states to support VFIO_MIGRATION_P2P:
+ *  RUNNING_P2P - RUNNING, except the device cannot do peer to peer DMA
+ * And VFIO_MIGRATION_PRE_COPY:
+ *  PRE_COPY - The device is running normally but tracking internal state
+ *             changes
+ * And VFIO_MIGRATION_P2P | VFIO_MIGRATION_PRE_COPY:
+ *  PRE_COPY_P2P - PRE_COPY, except the device cannot do peer to peer DMA
+ *
+ * The FSM takes actions on the arcs between FSM states. The driver implements
+ * the following behavior for the FSM arcs:
+ *
+ * RUNNING_P2P -> STOP
+ * STOP_COPY -> STOP
+ *   While in STOP the device must stop the operation of the device. The device
+ *   must not generate interrupts, DMA, or any other change to external state.
+ *   It must not change its internal state. When stopped the device and kernel
+ *   migration driver must accept and respond to interaction to support external
+ *   subsystems in the STOP state, for example PCI MSI-X and PCI config space.
+ *   Failure by the user to restrict device access while in STOP must not result
+ *   in error conditions outside the user context (ex. host system faults).
+ *
+ *   The STOP_COPY arc will terminate a data transfer session.
+ *
+ * RESUMING -> STOP
+ *   Leaving RESUMING terminates a data transfer session and indicates the
+ *   device should complete processing of the data delivered by write(). The
+ *   kernel migration driver should complete the incorporation of data written
+ *   to the data transfer FD into the device internal state and perform
+ *   final validity and consistency checking of the new device state. If the
+ *   user provided data is found to be incomplete, inconsistent, or otherwise
+ *   invalid, the migration driver must fail the SET_STATE ioctl and
+ *   optionally go to the ERROR state as described below.
+ *
+ *   While in STOP the device has the same behavior as other STOP states
+ *   described above.
+ *
+ *   To abort a RESUMING session the device must be reset.
+ *
+ * PRE_COPY -> RUNNING
+ * RUNNING_P2P -> RUNNING
+ *   While in RUNNING the device is fully operational, the device may generate
+ *   interrupts, DMA, respond to MMIO, all vfio device regions are functional,
+ *   and the device may advance its internal state.
+ *
+ *   The PRE_COPY arc will terminate a data transfer session.
+ *
+ * PRE_COPY_P2P -> RUNNING_P2P
+ * RUNNING -> RUNNING_P2P
+ * STOP -> RUNNING_P2P
+ *   While in RUNNING_P2P the device is partially running in the P2P quiescent
+ *   state defined below.
+ *
+ *   The PRE_COPY_P2P arc will terminate a data transfer session.
+ *
+ * RUNNING -> PRE_COPY
+ * RUNNING_P2P -> PRE_COPY_P2P
+ * STOP -> STOP_COPY
+ *   PRE_COPY, PRE_COPY_P2P and STOP_COPY form the "saving group" of states
+ *   which share a data transfer session. Moving between these states alters
+ *   what is streamed in session, but does not terminate or otherwise affect
+ *   the associated fd.
+ *
+ *   These arcs begin the process of saving the device state and will return a
+ *   new data_fd. The migration driver may perform actions such as enabling
+ *   dirty logging of device state when entering PRE_COPY or PER_COPY_P2P.
+ *
+ *   Each arc does not change the device operation, the device remains
+ *   RUNNING, P2P quiesced or in STOP. The STOP_COPY state is described below
+ *   in PRE_COPY_P2P -> STOP_COPY.
+ *
+ * PRE_COPY -> PRE_COPY_P2P
+ *   Entering PRE_COPY_P2P continues all the behaviors of PRE_COPY above.
+ *   However, while in the PRE_COPY_P2P state, the device is partially running
+ *   in the P2P quiescent state defined below, like RUNNING_P2P.
+ *
+ * PRE_COPY_P2P -> PRE_COPY
+ *   This arc allows returning the device to a full RUNNING behavior while
+ *   continuing all the behaviors of PRE_COPY.
+ *
+ * PRE_COPY_P2P -> STOP_COPY
+ *   While in the STOP_COPY state the device has the same behavior as STOP
+ *   with the addition that the data transfers session continues to stream the
+ *   migration state. End of stream on the FD indicates the entire device
+ *   state has been transferred.
+ *
+ *   The user should take steps to restrict access to vfio device regions while
+ *   the device is in STOP_COPY or risk corruption of the device migration data
+ *   stream.
+ *
+ * STOP -> RESUMING
+ *   Entering the RESUMING state starts a process of restoring the device state
+ *   and will return a new data_fd. The data stream fed into the data_fd should
+ *   be taken from the data transfer output of a single FD during saving from
+ *   a compatible device. The migration driver may alter/reset the internal
+ *   device state for this arc if required to prepare the device to receive the
+ *   migration data.
+ *
+ * STOP_COPY -> PRE_COPY
+ * STOP_COPY -> PRE_COPY_P2P
+ *   These arcs are not permitted and return error if requested. Future
+ *   revisions of this API may define behaviors for these arcs, in this case
+ *   support will be discoverable by a new flag in
+ *   VFIO_DEVICE_FEATURE_MIGRATION.
+ *
+ * any -> ERROR
+ *   ERROR cannot be specified as a device state, however any transition request
+ *   can be failed with an errno return and may then move the device_state into
+ *   ERROR. In this case the device was unable to execute the requested arc and
+ *   was also unable to restore the device to any valid device_state.
+ *   To recover from ERROR VFIO_DEVICE_RESET must be used to return the
+ *   device_state back to RUNNING.
+ *
+ * The optional peer to peer (P2P) quiescent state is intended to be a quiescent
+ * state for the device for the purposes of managing multiple devices within a
+ * user context where peer-to-peer DMA between devices may be active. The
+ * RUNNING_P2P and PRE_COPY_P2P states must prevent the device from initiating
+ * any new P2P DMA transactions. If the device can identify P2P transactions
+ * then it can stop only P2P DMA, otherwise it must stop all DMA. The migration
+ * driver must complete any such outstanding operations prior to completing the
+ * FSM arc into a P2P state. For the purpose of specification the states
+ * behave as though the device was fully running if not supported. Like while in
+ * STOP or STOP_COPY the user must not touch the device, otherwise the state
+ * can be exited.
+ *
+ * The remaining possible transitions are interpreted as combinations of the
+ * above FSM arcs. As there are multiple paths through the FSM arcs the path
+ * should be selected based on the following rules:
+ *   - Select the shortest path.
+ *   - The path cannot have saving group states as interior arcs, only
+ *     starting/end states.
+ * Refer to vfio_mig_get_next_state() for the result of the algorithm.
+ *
+ * The automatic transit through the FSM arcs that make up the combination
+ * transition is invisible to the user. When working with combination arcs the
+ * user may see any step along the path in the device_state if SET_STATE
+ * fails. When handling these types of errors users should anticipate future
+ * revisions of this protocol using new states and those states becoming
+ * visible in this case.
+ *
+ * The optional states cannot be used with SET_STATE if the device does not
+ * support them. The user can discover if these states are supported by using
+ * VFIO_DEVICE_FEATURE_MIGRATION. By using combination transitions the user can
+ * avoid knowing about these optional states if the kernel driver supports them.
+ *
+ * Arcs touching PRE_COPY and PRE_COPY_P2P are removed if support for PRE_COPY
+ * is not present.
+ */
+enum vfio_device_mig_state {
+	VFIO_DEVICE_STATE_ERROR = 0,
+	VFIO_DEVICE_STATE_STOP = 1,
+	VFIO_DEVICE_STATE_RUNNING = 2,
+	VFIO_DEVICE_STATE_STOP_COPY = 3,
+	VFIO_DEVICE_STATE_RESUMING = 4,
+	VFIO_DEVICE_STATE_RUNNING_P2P = 5,
+	VFIO_DEVICE_STATE_PRE_COPY = 6,
+	VFIO_DEVICE_STATE_PRE_COPY_P2P = 7,
+};
+
+/**
+ * VFIO_MIG_GET_PRECOPY_INFO - _IO(VFIO_TYPE, VFIO_BASE + 21)
+ *
+ * This ioctl is used on the migration data FD in the precopy phase of the
+ * migration data transfer. It returns an estimate of the current data sizes
+ * remaining to be transferred. It allows the user to judge when it is
+ * appropriate to leave PRE_COPY for STOP_COPY.
+ *
+ * This ioctl is valid only in PRE_COPY states and kernel driver should
+ * return -EINVAL from any other migration state.
+ *
+ * The vfio_precopy_info data structure returned by this ioctl provides
+ * estimates of data available from the device during the PRE_COPY states.
+ * This estimate is split into two categories, initial_bytes and
+ * dirty_bytes.
+ *
+ * The initial_bytes field indicates the amount of initial precopy
+ * data available from the device. This field should have a non-zero initial
+ * value and decrease as migration data is read from the device.
+ * It is recommended to leave PRE_COPY for STOP_COPY only after this field
+ * reaches zero. Leaving PRE_COPY earlier might make things slower.
+ *
+ * The dirty_bytes field tracks device state changes relative to data
+ * previously retrieved.  This field starts at zero and may increase as
+ * the internal device state is modified or decrease as that modified
+ * state is read from the device.
+ *
+ * Userspace may use the combination of these fields to estimate the
+ * potential data size available during the PRE_COPY phases, as well as
+ * trends relative to the rate the device is dirtying its internal
+ * state, but these fields are not required to have any bearing relative
+ * to the data size available during the STOP_COPY phase.
+ *
+ * Drivers have a lot of flexibility in when and what they transfer during the
+ * PRE_COPY phase, and how they report this from VFIO_MIG_GET_PRECOPY_INFO.
+ *
+ * During pre-copy the migration data FD has a temporary "end of stream" that is
+ * reached when both initial_bytes and dirty_byte are zero. For instance, this
+ * may indicate that the device is idle and not currently dirtying any internal
+ * state. When read() is done on this temporary end of stream the kernel driver
+ * should return ENOMSG from read(). Userspace can wait for more data (which may
+ * never come) by using poll.
+ *
+ * Once in STOP_COPY the migration data FD has a permanent end of stream
+ * signaled in the usual way by read() always returning 0 and poll always
+ * returning readable. ENOMSG may not be returned in STOP_COPY.
+ * Support for this ioctl is mandatory if a driver claims to support
+ * VFIO_MIGRATION_PRE_COPY.
+ *
+ * Return: 0 on success, -1 and errno set on failure.
+ */
+struct vfio_precopy_info {
+	__u32 argsz;
+	__u32 flags;
+	__aligned_u64 initial_bytes;
+	__aligned_u64 dirty_bytes;
+};
+
+#define VFIO_MIG_GET_PRECOPY_INFO _IO(VFIO_TYPE, VFIO_BASE + 21)
+
+/*
+ * Upon VFIO_DEVICE_FEATURE_SET, allow the device to be moved into a low power
+ * state with the platform-based power management.  Device use of lower power
+ * states depends on factors managed by the runtime power management core,
+ * including system level support and coordinating support among dependent
+ * devices.  Enabling device low power entry does not guarantee lower power
+ * usage by the device, nor is a mechanism provided through this feature to
+ * know the current power state of the device.  If any device access happens
+ * (either from the host or through the vfio uAPI) when the device is in the
+ * low power state, then the host will move the device out of the low power
+ * state as necessary prior to the access.  Once the access is completed, the
+ * device may re-enter the low power state.  For single shot low power support
+ * with wake-up notification, see
+ * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP below.  Access to mmap'd
+ * device regions is disabled on LOW_POWER_ENTRY and may only be resumed after
+ * calling LOW_POWER_EXIT.
+ */
+#define VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY 3
+
+/*
+ * This device feature has the same behavior as
+ * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY with the exception that the user
+ * provides an eventfd for wake-up notification.  When the device moves out of
+ * the low power state for the wake-up, the host will not allow the device to
+ * re-enter a low power state without a subsequent user call to one of the low
+ * power entry device feature IOCTLs.  Access to mmap'd device regions is
+ * disabled on LOW_POWER_ENTRY_WITH_WAKEUP and may only be resumed after the
+ * low power exit.  The low power exit can happen either through LOW_POWER_EXIT
+ * or through any other access (where the wake-up notification has been
+ * generated).  The access to mmap'd device regions will not trigger low power
+ * exit.
+ *
+ * The notification through the provided eventfd will be generated only when
+ * the device has entered and is resumed from a low power state after
+ * calling this device feature IOCTL.  A device that has not entered low power
+ * state, as managed through the runtime power management core, will not
+ * generate a notification through the provided eventfd on access.  Calling the
+ * LOW_POWER_EXIT feature is optional in the case where notification has been
+ * signaled on the provided eventfd that a resume from low power has occurred.
+ */
+struct vfio_device_low_power_entry_with_wakeup {
+	__s32 wakeup_eventfd;
+	__u32 reserved;
+};
+
+#define VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP 4
+
+/*
+ * Upon VFIO_DEVICE_FEATURE_SET, disallow use of device low power states as
+ * previously enabled via VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY or
+ * VFIO_DEVICE_FEATURE_LOW_POWER_ENTRY_WITH_WAKEUP device features.
+ * This device feature IOCTL may itself generate a wakeup eventfd notification
+ * in the latter case if the device had previously entered a low power state.
+ */
+#define VFIO_DEVICE_FEATURE_LOW_POWER_EXIT 5
+
+/*
+ * Upon VFIO_DEVICE_FEATURE_SET start/stop device DMA logging.
+ * VFIO_DEVICE_FEATURE_PROBE can be used to detect if the device supports
+ * DMA logging.
+ *
+ * DMA logging allows a device to internally record what DMAs the device is
+ * initiating and report them back to userspace. It is part of the VFIO
+ * migration infrastructure that allows implementing dirty page tracking
+ * during the pre copy phase of live migration. Only DMA WRITEs are logged,
+ * and this API is not connected to VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE.
+ *
+ * When DMA logging is started a range of IOVAs to monitor is provided and the
+ * device can optimize its logging to cover only the IOVA range given. Each
+ * DMA that the device initiates inside the range will be logged by the device
+ * for later retrieval.
+ *
+ * page_size is an input that hints what tracking granularity the device
+ * should try to achieve. If the device cannot do the hinted page size then
+ * it's the driver choice which page size to pick based on its support.
+ * On output the device will return the page size it selected.
+ *
+ * ranges is a pointer to an array of
+ * struct vfio_device_feature_dma_logging_range.
+ *
+ * The core kernel code guarantees to support by minimum num_ranges that fit
+ * into a single kernel page. User space can try higher values but should give
+ * up if the above can't be achieved as of some driver limitations.
+ *
+ * A single call to start device DMA logging can be issued and a matching stop
+ * should follow at the end. Another start is not allowed in the meantime.
+ */
+struct vfio_device_feature_dma_logging_control {
+	__aligned_u64 page_size;
+	__u32 num_ranges;
+	__u32 __reserved;
+	__aligned_u64 ranges;
+};
+
+struct vfio_device_feature_dma_logging_range {
+	__aligned_u64 iova;
+	__aligned_u64 length;
+};
+
+#define VFIO_DEVICE_FEATURE_DMA_LOGGING_START 6
+
+/*
+ * Upon VFIO_DEVICE_FEATURE_SET stop device DMA logging that was started
+ * by VFIO_DEVICE_FEATURE_DMA_LOGGING_START
+ */
+#define VFIO_DEVICE_FEATURE_DMA_LOGGING_STOP 7
+
+/*
+ * Upon VFIO_DEVICE_FEATURE_GET read back and clear the device DMA log
+ *
+ * Query the device's DMA log for written pages within the given IOVA range.
+ * During querying the log is cleared for the IOVA range.
+ *
+ * bitmap is a pointer to an array of u64s that will hold the output bitmap
+ * with 1 bit reporting a page_size unit of IOVA. The mapping of IOVA to bits
+ * is given by:
+ *  bitmap[(addr - iova)/page_size] & (1ULL << (addr % 64))
+ *
+ * The input page_size can be any power of two value and does not have to
+ * match the value given to VFIO_DEVICE_FEATURE_DMA_LOGGING_START. The driver
+ * will format its internal logging to match the reporting page size, possibly
+ * by replicating bits if the internal page size is lower than requested.
+ *
+ * The LOGGING_REPORT will only set bits in the bitmap and never clear or
+ * perform any initialization of the user provided bitmap.
+ *
+ * If any error is returned userspace should assume that the dirty log is
+ * corrupted. Error recovery is to consider all memory dirty and try to
+ * restart the dirty tracking, or to abort/restart the whole migration.
+ *
+ * If DMA logging is not enabled, an error will be returned.
+ *
+ */
+struct vfio_device_feature_dma_logging_report {
+	__aligned_u64 iova;
+	__aligned_u64 length;
+	__aligned_u64 page_size;
+	__aligned_u64 bitmap;
+};
+
+#define VFIO_DEVICE_FEATURE_DMA_LOGGING_REPORT 8
+
+/*
+ * Upon VFIO_DEVICE_FEATURE_GET read back the estimated data length that will
+ * be required to complete stop copy.
+ *
+ * Note: Can be called on each device state.
+ */
+
+struct vfio_device_feature_mig_data_size {
+	__aligned_u64 stop_copy_length;
+};
+
+#define VFIO_DEVICE_FEATURE_MIG_DATA_SIZE 9
+
 /* -------- API for Type1 VFIO IOMMU -------- */
 
 /**
@@ -516,7 +1274,69 @@ struct vfio_iommu_type1_info {
 	__u32	argsz;
 	__u32	flags;
 #define VFIO_IOMMU_INFO_PGSIZES (1 << 0)	/* supported page sizes info */
-	__u64	iova_pgsizes;		/* Bitmap of supported page sizes */
+#define VFIO_IOMMU_INFO_CAPS	(1 << 1)	/* Info supports caps */
+	__u64	iova_pgsizes;	/* Bitmap of supported page sizes */
+	__u32   cap_offset;	/* Offset within info struct of first cap */
+};
+
+/*
+ * The IOVA capability allows to report the valid IOVA range(s)
+ * excluding any non-relaxable reserved regions exposed by
+ * devices attached to the container. Any DMA map attempt
+ * outside the valid iova range will return error.
+ *
+ * The structures below define version 1 of this capability.
+ */
+#define VFIO_IOMMU_TYPE1_INFO_CAP_IOVA_RANGE  1
+
+struct vfio_iova_range {
+	__u64	start;
+	__u64	end;
+};
+
+struct vfio_iommu_type1_info_cap_iova_range {
+	struct	vfio_info_cap_header header;
+	__u32	nr_iovas;
+	__u32	reserved;
+	struct	vfio_iova_range iova_ranges[];
+};
+
+/*
+ * The migration capability allows to report supported features for migration.
+ *
+ * The structures below define version 1 of this capability.
+ *
+ * The existence of this capability indicates that IOMMU kernel driver supports
+ * dirty page logging.
+ *
+ * pgsize_bitmap: Kernel driver returns bitmap of supported page sizes for dirty
+ * page logging.
+ * max_dirty_bitmap_size: Kernel driver returns maximum supported dirty bitmap
+ * size in bytes that can be used by user applications when getting the dirty
+ * bitmap.
+ */
+#define VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION  2
+
+struct vfio_iommu_type1_info_cap_migration {
+	struct	vfio_info_cap_header header;
+	__u32	flags;
+	__u64	pgsize_bitmap;
+	__u64	max_dirty_bitmap_size;		/* in bytes */
+};
+
+/*
+ * The DMA available capability allows to report the current number of
+ * simultaneously outstanding DMA mappings that are allowed.
+ *
+ * The structure below defines version 1 of this capability.
+ *
+ * avail: specifies the current number of outstanding DMA mappings allowed.
+ */
+#define VFIO_IOMMU_TYPE1_INFO_DMA_AVAIL 3
+
+struct vfio_iommu_type1_info_dma_avail {
+	struct	vfio_info_cap_header header;
+	__u32	avail;
 };
 
 #define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
@@ -526,12 +1346,21 @@ struct vfio_iommu_type1_info {
  *
  * Map process virtual addresses to IO virtual addresses using the
  * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required.
+ *
+ * If flags & VFIO_DMA_MAP_FLAG_VADDR, update the base vaddr for iova. The vaddr
+ * must have previously been invalidated with VFIO_DMA_UNMAP_FLAG_VADDR.  To
+ * maintain memory consistency within the user application, the updated vaddr
+ * must address the same memory object as originally mapped.  Failure to do so
+ * will result in user memory corruption and/or device misbehavior.  iova and
+ * size must match those in the original MAP_DMA call.  Protection is not
+ * changed, and the READ & WRITE flags must be 0.
  */
 struct vfio_iommu_type1_dma_map {
 	__u32	argsz;
 	__u32	flags;
 #define VFIO_DMA_MAP_FLAG_READ (1 << 0)		/* readable from device */
 #define VFIO_DMA_MAP_FLAG_WRITE (1 << 1)	/* writable from device */
+#define VFIO_DMA_MAP_FLAG_VADDR (1 << 2)
 	__u64	vaddr;				/* Process virtual address */
 	__u64	iova;				/* IO virtual address */
 	__u64	size;				/* Size of mapping (bytes) */
@@ -539,6 +1368,12 @@ struct vfio_iommu_type1_dma_map {
 
 #define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13)
 
+struct vfio_bitmap {
+	__u64        pgsize;	/* page size for bitmap in bytes */
+	__u64        size;	/* in bytes */
+	__u64 __user *data;	/* one bit per page */
+};
+
 /**
  * VFIO_IOMMU_UNMAP_DMA - _IOWR(VFIO_TYPE, VFIO_BASE + 14,
  *							struct vfio_dma_unmap)
@@ -548,12 +1383,34 @@ struct vfio_iommu_type1_dma_map {
  * field.  No guarantee is made to the user that arbitrary unmaps of iova
  * or size different from those used in the original mapping call will
  * succeed.
+ *
+ * VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP should be set to get the dirty bitmap
+ * before unmapping IO virtual addresses. When this flag is set, the user must
+ * provide a struct vfio_bitmap in data[]. User must provide zero-allocated
+ * memory via vfio_bitmap.data and its size in the vfio_bitmap.size field.
+ * A bit in the bitmap represents one page, of user provided page size in
+ * vfio_bitmap.pgsize field, consecutively starting from iova offset. Bit set
+ * indicates that the page at that offset from iova is dirty. A Bitmap of the
+ * pages in the range of unmapped size is returned in the user-provided
+ * vfio_bitmap.data.
+ *
+ * If flags & VFIO_DMA_UNMAP_FLAG_ALL, unmap all addresses.  iova and size
+ * must be 0.  This cannot be combined with the get-dirty-bitmap flag.
+ *
+ * If flags & VFIO_DMA_UNMAP_FLAG_VADDR, do not unmap, but invalidate host
+ * virtual addresses in the iova range.  DMA to already-mapped pages continues.
+ * Groups may not be added to the container while any addresses are invalid.
+ * This cannot be combined with the get-dirty-bitmap flag.
  */
 struct vfio_iommu_type1_dma_unmap {
 	__u32	argsz;
 	__u32	flags;
+#define VFIO_DMA_UNMAP_FLAG_GET_DIRTY_BITMAP (1 << 0)
+#define VFIO_DMA_UNMAP_FLAG_ALL		     (1 << 1)
+#define VFIO_DMA_UNMAP_FLAG_VADDR	     (1 << 2)
 	__u64	iova;				/* IO virtual address */
 	__u64	size;				/* Size of mapping (bytes) */
+	__u8    data[];
 };
 
 #define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14)
@@ -565,6 +1422,57 @@ struct vfio_iommu_type1_dma_unmap {
 #define VFIO_IOMMU_ENABLE	_IO(VFIO_TYPE, VFIO_BASE + 15)
 #define VFIO_IOMMU_DISABLE	_IO(VFIO_TYPE, VFIO_BASE + 16)
 
+/**
+ * VFIO_IOMMU_DIRTY_PAGES - _IOWR(VFIO_TYPE, VFIO_BASE + 17,
+ *                                     struct vfio_iommu_type1_dirty_bitmap)
+ * IOCTL is used for dirty pages logging.
+ * Caller should set flag depending on which operation to perform, details as
+ * below:
+ *
+ * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_START flag set, instructs
+ * the IOMMU driver to log pages that are dirtied or potentially dirtied by
+ * the device; designed to be used when a migration is in progress. Dirty pages
+ * are logged until logging is disabled by user application by calling the IOCTL
+ * with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag.
+ *
+ * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP flag set, instructs
+ * the IOMMU driver to stop logging dirtied pages.
+ *
+ * Calling the IOCTL with VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP flag set
+ * returns the dirty pages bitmap for IOMMU container for a given IOVA range.
+ * The user must specify the IOVA range and the pgsize through the structure
+ * vfio_iommu_type1_dirty_bitmap_get in the data[] portion. This interface
+ * supports getting a bitmap of the smallest supported pgsize only and can be
+ * modified in future to get a bitmap of any specified supported pgsize. The
+ * user must provide a zeroed memory area for the bitmap memory and specify its
+ * size in bitmap.size. One bit is used to represent one page consecutively
+ * starting from iova offset. The user should provide page size in bitmap.pgsize
+ * field. A bit set in the bitmap indicates that the page at that offset from
+ * iova is dirty. The caller must set argsz to a value including the size of
+ * structure vfio_iommu_type1_dirty_bitmap_get, but excluding the size of the
+ * actual bitmap. If dirty pages logging is not enabled, an error will be
+ * returned.
+ *
+ * Only one of the flags _START, _STOP and _GET may be specified at a time.
+ *
+ */
+struct vfio_iommu_type1_dirty_bitmap {
+	__u32        argsz;
+	__u32        flags;
+#define VFIO_IOMMU_DIRTY_PAGES_FLAG_START	(1 << 0)
+#define VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP	(1 << 1)
+#define VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP	(1 << 2)
+	__u8         data[];
+};
+
+struct vfio_iommu_type1_dirty_bitmap_get {
+	__u64              iova;	/* IO virtual address */
+	__u64              size;	/* Size of iova range */
+	struct vfio_bitmap bitmap;
+};
+
+#define VFIO_IOMMU_DIRTY_PAGES             _IO(VFIO_TYPE, VFIO_BASE + 17)
+
 /* -------- Additional API for SPAPR TCE (Server POWERPC) IOMMU -------- */
 
 /*
@@ -716,4 +1624,4 @@ struct vfio_iommu_spapr_tce_remove {
 
 /* ***************************************************************** */
 
-#endif /* VFIO_H */
+#endif /* _UAPIVFIO_H */
diff --git a/include/linux/vhost.h b/include/linux/vhost.h
index 56b7ab5..92e1b70 100644
--- a/include/linux/vhost.h
+++ b/include/linux/vhost.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
 #ifndef _LINUX_VHOST_H
 #define _LINUX_VHOST_H
 /* Userspace interface for in-kernel virtio accelerators. */
@@ -10,84 +11,11 @@
  * device configuration.
  */
 
+#include <linux/vhost_types.h>
 #include <linux/types.h>
-#include <linux/compiler.h>
 #include <linux/ioctl.h>
-#include <linux/virtio_config.h>
-#include <linux/virtio_ring.h>
-
-struct vhost_vring_state {
-	unsigned int index;
-	unsigned int num;
-};
-
-struct vhost_vring_file {
-	unsigned int index;
-	int fd; /* Pass -1 to unbind from file. */
-
-};
-
-struct vhost_vring_addr {
-	unsigned int index;
-	/* Option flags. */
-	unsigned int flags;
-	/* Flag values: */
-	/* Whether log address is valid. If set enables logging. */
-#define VHOST_VRING_F_LOG 0
-
-	/* Start of array of descriptors (virtually contiguous) */
-	__u64 desc_user_addr;
-	/* Used structure address. Must be 32 bit aligned */
-	__u64 used_user_addr;
-	/* Available structure address. Must be 16 bit aligned */
-	__u64 avail_user_addr;
-	/* Logging support. */
-	/* Log writes to used structure, at offset calculated from specified
-	 * address. Address must be 32 bit aligned. */
-	__u64 log_guest_addr;
-};
-
-/* no alignment requirement */
-struct vhost_iotlb_msg {
-	__u64 iova;
-	__u64 size;
-	__u64 uaddr;
-#define VHOST_ACCESS_RO      0x1
-#define VHOST_ACCESS_WO      0x2
-#define VHOST_ACCESS_RW      0x3
-	__u8 perm;
-#define VHOST_IOTLB_MISS           1
-#define VHOST_IOTLB_UPDATE         2
-#define VHOST_IOTLB_INVALIDATE     3
-#define VHOST_IOTLB_ACCESS_FAIL    4
-	__u8 type;
-};
-
-#define VHOST_IOTLB_MSG 0x1
-
-struct vhost_msg {
-	int type;
-	union {
-		struct vhost_iotlb_msg iotlb;
-		__u8 padding[64];
-	};
-};
-
-struct vhost_memory_region {
-	__u64 guest_phys_addr;
-	__u64 memory_size; /* bytes */
-	__u64 userspace_addr;
-	__u64 flags_padding; /* No flags are currently specified. */
-};
-
-/* All region addresses and sizes must be 4K aligned. */
-#define VHOST_PAGE_SIZE 0x1000
-
-struct vhost_memory {
-	__u32 nregions;
-	__u32 padding;
-	struct vhost_memory_region regions[0];
-};
+
+#define VHOST_FILE_UNBIND -1
 
 /* ioctls */
 
@@ -159,6 +87,11 @@ struct vhost_memory {
 #define VHOST_GET_VRING_BUSYLOOP_TIMEOUT _IOW(VHOST_VIRTIO, 0x24,	\
 					 struct vhost_vring_state)
 
+/* Set or get vhost backend capability */
+
+#define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64)
+#define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64)
+
 /* VHOST_NET specific defines */
 
 /* Attach virtio net ring to a raw socket, or tap device.
@@ -167,33 +100,7 @@ struct vhost_memory {
  * device.  This can be used to stop the ring (e.g. for migration). */
 #define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
 
-/* Feature bits */
-/* Log all write descriptors. Can be changed while device is active. */
-#define VHOST_F_LOG_ALL 26
-/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
-#define VHOST_NET_F_VIRTIO_NET_HDR 27
-/* Vhost have device IOTLB */
-#define VHOST_F_DEVICE_IOTLB 63
-
-/* VHOST_SCSI specific definitions */
-
-/*
- * Used by QEMU userspace to ensure a consistent vhost-scsi ABI.
- *
- * ABI Rev 0: July 2012 version starting point for v3.6-rc merge candidate +
- *            RFC-v2 vhost-scsi userspace.  Add GET_ABI_VERSION ioctl usage
- * ABI Rev 1: January 2013. Ignore vhost_tpgt filed in struct vhost_scsi_target.
- *            All the targets under vhost_wwpn can be seen and used by guset.
- */
-
-#define VHOST_SCSI_ABI_VERSION	1
-
-struct vhost_scsi_target {
-	int abi_version;
-	char vhost_wwpn[224]; /* TRANSPORT_IQN_LEN */
-	unsigned short vhost_tpgt;
-	unsigned short reserved;
-};
+/* VHOST_SCSI specific defines */
 
 #define VHOST_SCSI_SET_ENDPOINT _IOW(VHOST_VIRTIO, 0x40, struct vhost_scsi_target)
 #define VHOST_SCSI_CLEAR_ENDPOINT _IOW(VHOST_VIRTIO, 0x41, struct vhost_scsi_target)
@@ -208,4 +115,77 @@ struct vhost_scsi_target {
 #define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
 #define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)
 
+/* VHOST_VDPA specific defines */
+
+/* Get the device id. The device ids follow the same definition of
+ * the device id defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_DEVICE_ID	_IOR(VHOST_VIRTIO, 0x70, __u32)
+/* Get and set the status. The status bits follow the same definition
+ * of the device status defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_STATUS		_IOR(VHOST_VIRTIO, 0x71, __u8)
+#define VHOST_VDPA_SET_STATUS		_IOW(VHOST_VIRTIO, 0x72, __u8)
+/* Get and set the device config. The device config follows the same
+ * definition of the device config defined in virtio-spec.
+ */
+#define VHOST_VDPA_GET_CONFIG		_IOR(VHOST_VIRTIO, 0x73, \
+					     struct vhost_vdpa_config)
+#define VHOST_VDPA_SET_CONFIG		_IOW(VHOST_VIRTIO, 0x74, \
+					     struct vhost_vdpa_config)
+/* Enable/disable the ring. */
+#define VHOST_VDPA_SET_VRING_ENABLE	_IOW(VHOST_VIRTIO, 0x75, \
+					     struct vhost_vring_state)
+/* Get the max ring size. */
+#define VHOST_VDPA_GET_VRING_NUM	_IOR(VHOST_VIRTIO, 0x76, __u16)
+
+/* Set event fd for config interrupt*/
+#define VHOST_VDPA_SET_CONFIG_CALL	_IOW(VHOST_VIRTIO, 0x77, int)
+
+/* Get the valid iova range */
+#define VHOST_VDPA_GET_IOVA_RANGE	_IOR(VHOST_VIRTIO, 0x78, \
+					     struct vhost_vdpa_iova_range)
+/* Get the config size */
+#define VHOST_VDPA_GET_CONFIG_SIZE	_IOR(VHOST_VIRTIO, 0x79, __u32)
+
+/* Get the count of all virtqueues */
+#define VHOST_VDPA_GET_VQS_COUNT	_IOR(VHOST_VIRTIO, 0x80, __u32)
+
+/* Get the number of virtqueue groups. */
+#define VHOST_VDPA_GET_GROUP_NUM	_IOR(VHOST_VIRTIO, 0x81, __u32)
+
+/* Get the number of address spaces. */
+#define VHOST_VDPA_GET_AS_NUM		_IOR(VHOST_VIRTIO, 0x7A, unsigned int)
+
+/* Get the group for a virtqueue: read index, write group in num,
+ * The virtqueue index is stored in the index field of
+ * vhost_vring_state. The group for this specific virtqueue is
+ * returned via num field of vhost_vring_state.
+ */
+#define VHOST_VDPA_GET_VRING_GROUP	_IOWR(VHOST_VIRTIO, 0x7B,	\
+					      struct vhost_vring_state)
+/* Set the ASID for a virtqueue group. The group index is stored in
+ * the index field of vhost_vring_state, the ASID associated with this
+ * group is stored at num field of vhost_vring_state.
+ */
+#define VHOST_VDPA_SET_GROUP_ASID	_IOW(VHOST_VIRTIO, 0x7C, \
+					     struct vhost_vring_state)
+
+/* Suspend a device so it does not process virtqueue requests anymore
+ *
+ * After the return of ioctl the device must preserve all the necessary state
+ * (the virtqueue vring base plus the possible device specific states) that is
+ * required for restoring in the future. The device must not change its
+ * configuration after that point.
+ */
+#define VHOST_VDPA_SUSPEND		_IO(VHOST_VIRTIO, 0x7D)
+
+/* Resume a device so it can resume processing virtqueue requests
+ *
+ * After the return of this ioctl the device will have restored all the
+ * necessary states and it is fully operational to continue processing the
+ * virtqueue descriptors.
+ */
+#define VHOST_VDPA_RESUME		_IO(VHOST_VIRTIO, 0x7E)
+
 #endif
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index 58e70b2..5af2a03 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -41,6 +41,7 @@
 #define VIRTIO_BLK_F_DISCARD	13	/* DISCARD is supported */
 #define VIRTIO_BLK_F_WRITE_ZEROES	14	/* WRITE ZEROES is supported */
 #define VIRTIO_BLK_F_SECURE_ERASE	16 /* Secure Erase is supported */
+#define VIRTIO_BLK_F_ZONED		17	/* Zoned block device */
 
 /* Legacy feature bits */
 #ifndef VIRTIO_BLK_NO_LEGACY
@@ -137,6 +138,16 @@ struct virtio_blk_config {
 	/* Secure erase commands must be aligned to this number of sectors. */
 	__virtio32 secure_erase_sector_alignment;
 
+	/* Zoned block device characteristics (if VIRTIO_BLK_F_ZONED) */
+	struct virtio_blk_zoned_characteristics {
+		__le32 zone_sectors;
+		__le32 max_open_zones;
+		__le32 max_active_zones;
+		__le32 max_append_sectors;
+		__le32 write_granularity;
+		__u8 model;
+		__u8 unused2[3];
+	} zoned;
 } __attribute__((packed));
 
 /*
@@ -174,6 +185,27 @@ struct virtio_blk_config {
 /* Secure erase command */
 #define VIRTIO_BLK_T_SECURE_ERASE	14
 
+/* Zone append command */
+#define VIRTIO_BLK_T_ZONE_APPEND    15
+
+/* Report zones command */
+#define VIRTIO_BLK_T_ZONE_REPORT    16
+
+/* Open zone command */
+#define VIRTIO_BLK_T_ZONE_OPEN      18
+
+/* Close zone command */
+#define VIRTIO_BLK_T_ZONE_CLOSE     20
+
+/* Finish zone command */
+#define VIRTIO_BLK_T_ZONE_FINISH    22
+
+/* Reset zone command */
+#define VIRTIO_BLK_T_ZONE_RESET     24
+
+/* Reset All zones command */
+#define VIRTIO_BLK_T_ZONE_RESET_ALL 26
+
 #ifndef VIRTIO_BLK_NO_LEGACY
 /* Barrier before this op. */
 #define VIRTIO_BLK_T_BARRIER	0x80000000
@@ -193,6 +225,72 @@ struct virtio_blk_outhdr {
 	__virtio64 sector;
 };
 
+/*
+ * Supported zoned device models.
+ */
+
+/* Regular block device */
+#define VIRTIO_BLK_Z_NONE      0
+/* Host-managed zoned device */
+#define VIRTIO_BLK_Z_HM        1
+/* Host-aware zoned device */
+#define VIRTIO_BLK_Z_HA        2
+
+/*
+ * Zone descriptor. A part of VIRTIO_BLK_T_ZONE_REPORT command reply.
+ */
+struct virtio_blk_zone_descriptor {
+	/* Zone capacity */
+	__le64 z_cap;
+	/* The starting sector of the zone */
+	__le64 z_start;
+	/* Zone write pointer position in sectors */
+	__le64 z_wp;
+	/* Zone type */
+	__u8 z_type;
+	/* Zone state */
+	__u8 z_state;
+	__u8 reserved[38];
+};
+
+struct virtio_blk_zone_report {
+	__le64 nr_zones;
+	__u8 reserved[56];
+	struct virtio_blk_zone_descriptor zones[];
+};
+
+/*
+ * Supported zone types.
+ */
+
+/* Conventional zone */
+#define VIRTIO_BLK_ZT_CONV         1
+/* Sequential Write Required zone */
+#define VIRTIO_BLK_ZT_SWR          2
+/* Sequential Write Preferred zone */
+#define VIRTIO_BLK_ZT_SWP          3
+
+/*
+ * Zone states that are available for zones of all types.
+ */
+
+/* Not a write pointer (conventional zones only) */
+#define VIRTIO_BLK_ZS_NOT_WP       0
+/* Empty */
+#define VIRTIO_BLK_ZS_EMPTY        1
+/* Implicitly Open */
+#define VIRTIO_BLK_ZS_IOPEN        2
+/* Explicitly Open */
+#define VIRTIO_BLK_ZS_EOPEN        3
+/* Closed */
+#define VIRTIO_BLK_ZS_CLOSED       4
+/* Read-Only */
+#define VIRTIO_BLK_ZS_RDONLY       13
+/* Full */
+#define VIRTIO_BLK_ZS_FULL         14
+/* Offline */
+#define VIRTIO_BLK_ZS_OFFLINE      15
+
 /* Unmap this range (only valid for write zeroes command) */
 #define VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP	0x00000001
 
@@ -219,4 +317,11 @@ struct virtio_scsi_inhdr {
 #define VIRTIO_BLK_S_OK		0
 #define VIRTIO_BLK_S_IOERR	1
 #define VIRTIO_BLK_S_UNSUPP	2
+
+/* Error codes that are specific to zoned block devices */
+#define VIRTIO_BLK_S_ZONE_INVALID_CMD     3
+#define VIRTIO_BLK_S_ZONE_UNALIGNED_WP    4
+#define VIRTIO_BLK_S_ZONE_OPEN_RESOURCE   5
+#define VIRTIO_BLK_S_ZONE_ACTIVE_RESOURCE 6
+
 #endif /* _LINUX_VIRTIO_BLK_H */
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 6cb842e..b4062be 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -57,6 +57,9 @@
 					 * Steering */
 #define VIRTIO_NET_F_CTRL_MAC_ADDR 23	/* Set MAC address */
 #define VIRTIO_NET_F_NOTF_COAL	53	/* Device supports notifications coalescing */
+#define VIRTIO_NET_F_GUEST_USO4	54	/* Guest can handle USOv4 in. */
+#define VIRTIO_NET_F_GUEST_USO6	55	/* Guest can handle USOv6 in. */
+#define VIRTIO_NET_F_HOST_USO	56	/* Host can handle USO in. */
 #define VIRTIO_NET_F_HASH_REPORT  57	/* Supports hash report */
 #define VIRTIO_NET_F_RSS	  60	/* Supports RSS RX steering */
 #define VIRTIO_NET_F_RSC_EXT	  61	/* extended coalescing info */
@@ -130,6 +133,7 @@ struct virtio_net_hdr_v1 {
 #define VIRTIO_NET_HDR_GSO_TCPV4	1	/* GSO frame, IPv4 TCP (TSO) */
 #define VIRTIO_NET_HDR_GSO_UDP		3	/* GSO frame, IPv4 UDP (UFO) */
 #define VIRTIO_NET_HDR_GSO_TCPV6	4	/* GSO frame, IPv6 TCP */
+#define VIRTIO_NET_HDR_GSO_UDP_L4	5	/* GSO frame, IPv4& IPv6 UDP (USO) */
 #define VIRTIO_NET_HDR_GSO_ECN		0x80	/* TCP has ECN set */
 	__u8 gso_type;
 	__virtio16 hdr_len;	/* Ethernet + IP + tcp/udp hdrs */
diff --git a/riscv/include/asm/kvm.h b/riscv/include/asm/kvm.h
index 8985ff2..92af6f3 100644
--- a/riscv/include/asm/kvm.h
+++ b/riscv/include/asm/kvm.h
@@ -49,6 +49,9 @@ struct kvm_sregs {
 struct kvm_riscv_config {
 	unsigned long isa;
 	unsigned long zicbom_block_size;
+	unsigned long mvendorid;
+	unsigned long marchid;
+	unsigned long mimpid;
 };
 
 /* CORE registers for KVM_GET_ONE_REG and KVM_SET_ONE_REG */
diff --git a/x86/include/asm/kvm.h b/x86/include/asm/kvm.h
index 46de10a..1a6a1f9 100644
--- a/x86/include/asm/kvm.h
+++ b/x86/include/asm/kvm.h
@@ -9,6 +9,7 @@
 
 #include <linux/types.h>
 #include <linux/ioctl.h>
+#include <linux/stddef.h>
 
 #define KVM_PIO_PAGE_OFFSET 1
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 2
@@ -53,14 +54,6 @@
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
 
-struct kvm_memory_alias {
-	__u32 slot;  /* this has a different namespace than memory slots */
-	__u32 flags;
-	__u64 guest_phys_addr;
-	__u64 memory_size;
-	__u64 target_phys_addr;
-};
-
 /* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
 struct kvm_pic_state {
 	__u8 last_irr;	/* edge detection */
@@ -214,6 +207,8 @@ struct kvm_msr_list {
 struct kvm_msr_filter_range {
 #define KVM_MSR_FILTER_READ  (1 << 0)
 #define KVM_MSR_FILTER_WRITE (1 << 1)
+#define KVM_MSR_FILTER_RANGE_VALID_MASK (KVM_MSR_FILTER_READ | \
+					 KVM_MSR_FILTER_WRITE)
 	__u32 flags;
 	__u32 nmsrs; /* number of msrs in bitmap */
 	__u32 base;  /* MSR index the bitmap starts at */
@@ -222,8 +217,11 @@ struct kvm_msr_filter_range {
 
 #define KVM_MSR_FILTER_MAX_RANGES 16
 struct kvm_msr_filter {
+#ifndef __KERNEL__
 #define KVM_MSR_FILTER_DEFAULT_ALLOW (0 << 0)
+#endif
 #define KVM_MSR_FILTER_DEFAULT_DENY  (1 << 0)
+#define KVM_MSR_FILTER_VALID_MASK (KVM_MSR_FILTER_DEFAULT_DENY)
 	__u32 flags;
 	struct kvm_msr_filter_range ranges[KVM_MSR_FILTER_MAX_RANGES];
 };
@@ -510,8 +508,8 @@ struct kvm_nested_state {
 	 * KVM_{GET,PUT}_NESTED_STATE ioctl values.
 	 */
 	union {
-		struct kvm_vmx_nested_state_data vmx[0];
-		struct kvm_svm_nested_state_data svm[0];
+		__DECLARE_FLEX_ARRAY(struct kvm_vmx_nested_state_data, vmx);
+		__DECLARE_FLEX_ARRAY(struct kvm_svm_nested_state_data, svm);
 	} data;
 };
 
@@ -528,8 +526,40 @@ struct kvm_pmu_event_filter {
 #define KVM_PMU_EVENT_ALLOW 0
 #define KVM_PMU_EVENT_DENY 1
 
+#define KVM_PMU_EVENT_FLAG_MASKED_EVENTS BIT(0)
+#define KVM_PMU_EVENT_FLAGS_VALID_MASK (KVM_PMU_EVENT_FLAG_MASKED_EVENTS)
+
+/*
+ * Masked event layout.
+ * Bits   Description
+ * ----   -----------
+ * 7:0    event select (low bits)
+ * 15:8   umask match
+ * 31:16  unused
+ * 35:32  event select (high bits)
+ * 36:54  unused
+ * 55     exclude bit
+ * 63:56  umask mask
+ */
+
+#define KVM_PMU_ENCODE_MASKED_ENTRY(event_select, mask, match, exclude) \
+	(((event_select) & 0xFFULL) | (((event_select) & 0XF00ULL) << 24) | \
+	(((mask) & 0xFFULL) << 56) | \
+	(((match) & 0xFFULL) << 8) | \
+	((__u64)(!!(exclude)) << 55))
+
+#define KVM_PMU_MASKED_ENTRY_EVENT_SELECT \
+	(GENMASK_ULL(7, 0) | GENMASK_ULL(35, 32))
+#define KVM_PMU_MASKED_ENTRY_UMASK_MASK		(GENMASK_ULL(63, 56))
+#define KVM_PMU_MASKED_ENTRY_UMASK_MATCH	(GENMASK_ULL(15, 8))
+#define KVM_PMU_MASKED_ENTRY_EXCLUDE		(BIT_ULL(55))
+#define KVM_PMU_MASKED_ENTRY_UMASK_MASK_SHIFT	(56)
+
 /* for KVM_{GET,SET,HAS}_DEVICE_ATTR */
 #define KVM_VCPU_TSC_CTRL 0 /* control group for the timestamp counter (TSC) */
 #define   KVM_VCPU_TSC_OFFSET 0 /* attribute for the TSC offset */
 
+/* x86-specific KVM_EXIT_HYPERCALL flags. */
+#define KVM_EXIT_HYPERCALL_LONG_MODE	BIT(0)
+
 #endif /* _ASM_X86_KVM_H */
-- 
2.41.0.162.gfafddb0af9-goog




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux