RE: [PATCH v3 07/10] iommu/vt-d: Add iotlb flush for nested domain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Tian, Kevin <kevin.tian@xxxxxxxxx>
> Sent: Wednesday, May 24, 2023 3:34 PM
> 
> > From: Liu, Yi L <yi.l.liu@xxxxxxxxx>
> > Sent: Thursday, May 11, 2023 10:51 PM
> >
> > This is needed as the stage-1 page table of the nested domain is
> > maintained outside the iommu subsystem, hence, needs to support iotlb
> > flush requests.
> >
> > This adds the data structure for flushing iotlb for the nested domain
> > allocated with IOMMU_HWPT_TYPE_VTD_S1 type and the related callback
> > to accept iotlb flush request from IOMMUFD.
> >
> > This only exposes the interface for invalidating IOTLB, but no for
> > device-TLB as device-TLB invalidation will be covered automatically
> > in IOTLB invalidation if the affected device is ATS-capable.
> >
> > Signed-off-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
> > Signed-off-by: Yi Liu <yi.l.liu@xxxxxxxxx>
> 
> Following how you split patches in former part of the series this should
> be split into three patches: one to introduce the uAPI changes, the 2nd
> to export symbols and the last to actually add iotlb flush.

Will do.

> > +static int intel_nested_cache_invalidate_user(struct iommu_domain
> > *domain,
> > +					      void *user_data)
> > +{
> > +	struct iommu_hwpt_invalidate_request_intel_vtd *req = user_data;
> > +	struct iommu_hwpt_invalidate_intel_vtd *inv_info = user_data;
> > +	struct dmar_domain *dmar_domain = to_dmar_domain(domain);
> > +	unsigned int entry_size = inv_info->entry_size;
> > +	u64 uptr = inv_info->inv_data_uptr;
> > +	u64 nr_uptr = inv_info->entry_nr_uptr;
> > +	struct device_domain_info *info;
> > +	u32 entry_nr, index;
> > +	unsigned long flags;
> > +	int ret = 0;
> > +
> > +	if (WARN_ON(!user_data))
> > +		return 0;
> 
> WARN_ON should lead to error returned.

Yes. or may just remove it. caller should provide a valid pointer anyhow.

> > +
> > +	if (get_user(entry_nr, (uint32_t __user *)u64_to_user_ptr(nr_uptr)))
> > +		return -EFAULT;
> > +
> > +	if (!entry_nr)
> > +		return -EINVAL;
> 
> Having zero number of entries is instead not an error. Just means no work
> to do.
> 
> > +
> > +	for (index = 0; index < entry_nr; index++) {
> > +		ret = copy_struct_from_user(req, sizeof(*req),
> > +					    u64_to_user_ptr(uptr + index *
> > entry_size),
> > +					    entry_size);
> > +		if (ret) {
> > +			pr_err_ratelimited("Failed to fetch invalidation
> > request\n");
> > +			break;
> > +		}
> > +
> > +		if (req->__reserved || (req->flags &
> > ~IOMMU_VTD_QI_FLAGS_LEAF) ||
> > +		    !IS_ALIGNED(req->addr, VTD_PAGE_SIZE)) {
> > +			ret = -EINVAL;
> > +			break;
> > +		}
> > +
> > +		spin_lock_irqsave(&dmar_domain->lock, flags);
> > +		list_for_each_entry(info, &dmar_domain->devices, link)
> > +			intel_nested_invalidate(info->dev, dmar_domain,
> > +						req->addr, req->npages);
> > +		spin_unlock_irqrestore(&dmar_domain->lock, flags);
> > +	}
> > +
> > +	if (ret && put_user(index, (uint32_t __user
> > *)u64_to_user_ptr(nr_uptr)))
> > +		return -EFAULT;
> 
> You want to always update the nr no matter success or failure
> 
> > diff --git a/drivers/iommu/iommufd/main.c
> > b/drivers/iommu/iommufd/main.c
> > index 39922f83ce34..b338b082950b 100644
> > --- a/drivers/iommu/iommufd/main.c
> > +++ b/drivers/iommu/iommufd/main.c
> > @@ -282,6 +282,12 @@ union ucmd_buffer {
> >  #ifdef CONFIG_IOMMUFD_TEST
> >  	struct iommu_test_cmd test;
> >  #endif
> > +	/*
> > +	 * hwpt_type specific structure used in the cache invalidation
> > +	 * path.
> > +	 */
> > +	struct iommu_hwpt_invalidate_intel_vtd vtd;
> > +	struct iommu_hwpt_invalidate_request_intel_vtd req_vtd;
> >  };
> 
> Can you add some explanation in commit msg why such vendor
> specific structures must be put in the generic ucmd_buffer?
> 
> >
> > +/**
> > + * enum iommu_hwpt_intel_vtd_invalidate_flags - Flags for Intel VT-d
> 
> enum iommu_hwpt_vtd_s1_invalidate_flags
> 
> > + *                                              stage-1 page table cache
> > + *                                              invalidation
> > + * @IOMMU_VTD_QI_FLAGS_LEAF: The LEAF flag indicates whether only the
> > + *                           leaf PTE caching needs to be invalidated
> > + *                           and other paging structure caches can be
> > + *                           preserved.
> > + */
> 
> what about "Drain Reads" and "Drain Writes"? Is the user allowed/required
> to provide those hints?

All other comments got. For these two hints, the two flags are from the IOTLB
Invalidation descriptor. Per below description, the hardware that supports nested
should support drain and does not require software to ask for it. So it appears no
need to define them in uapi.

"Hardware implementation with Major Version 2 or higher (VER_REG),
always performs required drain without software explicitly requesting
a drain in IOTLB invalidation. This field is deprecated and hardware
will always report it as 1 to maintain backward compatibility with
software"

Regards,
Yi Liu

> > +
> > +/**
> > + * struct iommu_hwpt_invalidate_request_intel_vtd - Intel VT-d cache
> > invalidation request
> 
> here you put "intel_vtd" in the end of the name. let's follow the same order
> as earlier definitions.
> 
> struct iommu_hwpt_vtd_s1_invalidate_desc
> 
> > + * @addr: The start address of the addresses to be invalidated.
> > + * @npages: Number of contiguous 4K pages to be invalidated.
> > + * @flags: Combination of enum iommu_hwpt_intel_vtd_invalidate_flags
> > + * @__reserved: Must be 0
> > + *
> > + * The Intel VT-d specific invalidation data for user-managed stage-1 cache
> > + * invalidation under nested translation. Userspace uses this structure to
> > + * tell host about the impacted caches after modifying the stage-1 page
> > table.
> > + *
> > + * Invalidating all the caches related to the hw_pagetable by setting
> > + * @addr==0 and @npages==__u64(-1).
> > + */
> > +struct iommu_hwpt_invalidate_request_intel_vtd {
> > +	__u64 addr;
> > +	__u64 npages;
> > +	__u32 flags;
> > +	__u32 __reserved;
> > +};
> > +
> > +/**
> > + * struct iommu_hwpt_invalidate_intel_vtd - Intel VT-d cache invalidation
> > info
> 
> iommu_hwpt_vtd_s1_invalidate
> 
> > + * @flags: Must be 0
> > + * @entry_size: Size in bytes of each cache invalidation request
> > + * @entry_nr_uptr: User pointer to the number of invalidation requests.
> > + *                 Kernel reads it to get the number of requests and
> > + *                 updates the buffer with the number of requests that
> > + *                 have been processed successfully. This pointer must
> > + *                 point to a __u32 type of memory location.
> > + * @inv_data_uptr: Pointer to the cache invalidation requests
> > + *
> > + * The Intel VT-d specific invalidation data for a set of cache invalidation
> > + * requests. Kernel loops the requests one-by-one and stops when failure
> > + * is encountered. The number of handled requests is reported to user by
> > + * writing the buffer pointed by @entry_nr_uptr.
> > + */
> > +struct iommu_hwpt_invalidate_intel_vtd {
> > +	__u32 flags;
> > +	__u32 entry_size;
> > +	__u64 entry_nr_uptr;
> > +	__u64 inv_data_uptr;
> > +};
> > +
> >  /**
> >   * struct iommu_hwpt_invalidate - ioctl(IOMMU_HWPT_INVALIDATE)
> >   * @size: sizeof(struct iommu_hwpt_invalidate)
> > @@ -520,6 +577,8 @@ struct iommu_hw_info {
> >   *
> > +==============================+================================
> > ========+
> >   * | @hwpt_type                   |     Data structure in @data_uptr       |
> >   * +------------------------------+----------------------------------------+
> > + * | IOMMU_HWPT_TYPE_VTD_S1       | struct
> > iommu_hwpt_invalidate_intel_vtd |
> > + * +------------------------------+----------------------------------------+
> >   */
> >  struct iommu_hwpt_invalidate {
> >  	__u32 size;
> > --
> > 2.34.1





[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux