[kvm-unit-tests PATCH v9 1/2] s390x: topology: Check the Perform Topology Function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We check that the PTF instruction is working correctly when
the cpu topology facility is available.

For KVM only, we test changing of the polarity between horizontal
and vertical and that a reset set the horizontal polarity.

Signed-off-by: Pierre Morel <pmorel@xxxxxxxxxxxxx>
---
 s390x/Makefile      |   1 +
 s390x/topology.c    | 189 ++++++++++++++++++++++++++++++++++++++++++++
 s390x/unittests.cfg |   3 +
 3 files changed, 193 insertions(+)
 create mode 100644 s390x/topology.c

diff --git a/s390x/Makefile b/s390x/Makefile
index a80db53..fe77b07 100644
--- a/s390x/Makefile
+++ b/s390x/Makefile
@@ -40,6 +40,7 @@ tests += $(TEST_DIR)/panic-loop-pgm.elf
 tests += $(TEST_DIR)/migration-sck.elf
 tests += $(TEST_DIR)/exittime.elf
 tests += $(TEST_DIR)/ex.elf
+tests += $(TEST_DIR)/topology.elf
 
 pv-tests += $(TEST_DIR)/pv-diags.elf
 
diff --git a/s390x/topology.c b/s390x/topology.c
new file mode 100644
index 0000000..2acede0
--- /dev/null
+++ b/s390x/topology.c
@@ -0,0 +1,189 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * CPU Topology
+ *
+ * Copyright IBM Corp. 2022
+ *
+ * Authors:
+ *  Pierre Morel <pmorel@xxxxxxxxxxxxx>
+ */
+
+#include <libcflat.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+#include <asm/interrupt.h>
+#include <asm/facility.h>
+#include <asm/barrier.h>
+#include <smp.h>
+#include <sclp.h>
+#include <s390x/hardware.h>
+
+#define PTF_REQ_HORIZONTAL	0
+#define PTF_REQ_VERTICAL	1
+#define PTF_CHECK		2
+
+#define PTF_ERR_NO_REASON	0
+#define PTF_ERR_ALRDY_POLARIZED	1
+#define PTF_ERR_IN_PROGRESS	2
+
+extern int diag308_load_reset(u64);
+
+static int ptf(unsigned long fc, unsigned long *rc)
+{
+	int cc;
+
+	asm volatile(
+		"	ptf	%1	\n"
+		"       ipm     %0	\n"
+		"       srl     %0,28	\n"
+		: "=d" (cc), "+d" (fc)
+		:
+		: "cc");
+
+	*rc = fc >> 8;
+	return cc;
+}
+
+static void check_privilege(int fc)
+{
+	unsigned long rc;
+
+	report_prefix_push("Privilege");
+	report_info("function code %d", fc);
+	enter_pstate();
+	expect_pgm_int();
+	ptf(fc, &rc);
+	check_pgm_int_code(PGM_INT_CODE_PRIVILEGED_OPERATION);
+	report_prefix_pop();
+}
+
+static void check_specifications(void)
+{
+	unsigned long error = 0;
+	unsigned long ptf_bits;
+	unsigned long rc;
+	int i;
+
+	report_prefix_push("Specifications");
+
+	/* Function codes above 3 are undefined */
+	for (i = 4; i < 255; i++) {
+		expect_pgm_int();
+		ptf(i, &rc);
+		if (clear_pgm_int() != PGM_INT_CODE_SPECIFICATION) {
+			report_fail("FC %d did not yield specification exception", i);
+			error = 1;
+		}
+	}
+	report(!error, "Undefined function codes");
+
+	/* Reserved bits must be 0 */
+	for (i = 8, error = 0; i < 64; i++) {
+		ptf_bits = 0x01UL << i;
+		expect_pgm_int();
+		ptf(ptf_bits, &rc);
+		if (clear_pgm_int() != PGM_INT_CODE_SPECIFICATION) {
+			report_fail("Reserved bit %d did not yield specification exception", i);
+			error = 1;
+		}
+	}
+
+	report(!error, "Reserved bits");
+
+	report_prefix_pop();
+}
+
+static void check_polarization_change(void)
+{
+	unsigned long rc;
+	int cc;
+
+	report_prefix_push("Polarization change");
+
+	/* We expect a clean state through reset */
+	report(diag308_load_reset(1), "load normal reset done");
+
+	/*
+	 * Set vertical polarization to verify that RESET sets
+	 * horizontal polarization back.
+	 */
+	cc = ptf(PTF_REQ_VERTICAL, &rc);
+	report(cc == 0, "Set vertical polarization.");
+
+	report(diag308_load_reset(1), "load normal reset done");
+
+	cc = ptf(PTF_CHECK, &rc);
+	report(cc == 0, "Reset should clear topology report");
+
+	cc = ptf(PTF_REQ_HORIZONTAL, &rc);
+	report(cc == 2 && rc == PTF_ERR_ALRDY_POLARIZED,
+	       "After RESET polarization is horizontal");
+
+	/* Flip between vertical and horizontal polarization */
+	cc = ptf(PTF_REQ_VERTICAL, &rc);
+	report(cc == 0, "Change to vertical");
+
+	cc = ptf(PTF_CHECK, &rc);
+	report(cc == 1, "Should report");
+
+	cc = ptf(PTF_REQ_VERTICAL, &rc);
+	report(cc == 2 && rc == PTF_ERR_ALRDY_POLARIZED, "Double change to vertical");
+
+	cc = ptf(PTF_CHECK, &rc);
+	report(cc == 0, "Should not report");
+
+	cc = ptf(PTF_REQ_HORIZONTAL, &rc);
+	report(cc == 0, "Change to horizontal");
+
+	cc = ptf(PTF_CHECK, &rc);
+	report(cc == 1, "Should Report");
+
+	cc = ptf(PTF_REQ_HORIZONTAL, &rc);
+	report(cc == 2 && rc == PTF_ERR_ALRDY_POLARIZED, "Double change to horizontal");
+
+	cc = ptf(PTF_CHECK, &rc);
+	report(cc == 0, "Should not report");
+
+	report_prefix_pop();
+}
+
+static void test_ptf(void)
+{
+	check_privilege(PTF_REQ_HORIZONTAL);
+	check_privilege(PTF_REQ_VERTICAL);
+	check_privilege(PTF_CHECK);
+	check_specifications();
+	check_polarization_change();
+}
+
+static struct {
+	const char *name;
+	void (*func)(void);
+} tests[] = {
+	{ "PTF", test_ptf },
+	{ NULL, NULL }
+};
+
+int main(int argc, char *argv[])
+{
+	int i;
+
+	report_prefix_push("CPU Topology");
+
+	if (!test_facility(11)) {
+		report_skip("Topology facility not present");
+		goto end;
+	}
+
+	report_info("Virtual machine level %ld", stsi_get_fc());
+
+	for (i = 0; tests[i].name; i++) {
+		report_prefix_push(tests[i].name);
+		tests[i].func();
+		report_prefix_pop();
+	}
+
+end:
+	report_prefix_pop();
+	return report_summary();
+}
diff --git a/s390x/unittests.cfg b/s390x/unittests.cfg
index b61faf0..fc3666b 100644
--- a/s390x/unittests.cfg
+++ b/s390x/unittests.cfg
@@ -218,3 +218,6 @@ extra_params = -append '--parallel'
 
 [execute]
 file = ex.elf
+
+[topology]
+file = topology.elf
-- 
2.31.1




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux