Changes since V2: - V2: https://lore.kernel.org/lkml/cover.1680038771.git.reinette.chatre@xxxxxxxxx/ - During testing of V2 "kernel test robot" reported issues resulting from include/linux/pci.h missing a stub for pci_msix_can_alloc_dyn() when CONFIG_PCI_MSI=n. A separate fix was sent to address this. The fix can be found in the kernel (since v6.3-rc7) as commit 195d8e5da3ac ("PCI/MSI: Provide missing stub for pci_msix_can_alloc_dyn()") - Biggest change is the transition to "active contexts" for both MSI and MSI-X. Interrupt contexts have always been allocated when the interrupts are allocated while they are only used while interrupts are enabled. In this series interrupt contexts are made dynamic, while doing so their allocation is moved to match how they are used: allocated when interrupts are enabled. Whether a Linux interrupt number exists determines whether an interrupt can be enabled. Previous policy (up to V2) that an allocated interrupt has an interrupt context no longer applies. Instead, an interrupt context has a handler/trigger, aka "active contexts". (Alex) - Re-ordered patches in support of "active contexts". - Only free interrupts on MSI-X teardown and otherwise use the allocated interrupts as a cache. (Alex) - Using unsigned int for the vector broke the unwind loop within vfio_msi_set_block(). (Alex) - Introduce new "has_dyn_msix" property of virtual device instead of querying support every time. (Alex) - Some smaller changes, please refer to individual patches. Changes since RFC V1: - RFC V1: https://lore.kernel.org/lkml/cover.1678911529.git.reinette.chatre@xxxxxxxxx/ - Improved changelogs. - Simplify interface so that vfio_irq_ctx_alloc_single() returns pointer to allocated context. (Alex) - Remove vfio_irq_ctx_range_allocated() and associated attempts to maintain invalid error path behavior. (Alex and Kevin) - Add pointer to interrupt context as function parameter to vfio_irq_ctx_free(). (Alex) - Ensure variables are initialized. (Dan Carpenter) - Only support dynamic allocation if device supports it. (Alex) Qemu allocates interrupts incrementally at the time the guest unmasks an interrupt, for example each time a Linux guest runs request_irq(). Dynamic allocation of MSI-X interrupts was not possible until v6.2 [1]. This prompted Qemu to, when allocating a new interrupt, first release all previously allocated interrupts (including disable of MSI-X) followed by re-allocation of all interrupts that includes the new interrupt. Please see [2] for a detailed discussion about this issue. Releasing and re-allocating interrupts may be acceptable if all interrupts are unmasked during device initialization. If unmasking of interrupts occur during runtime this may result in lost interrupts. For example, consider an accelerator device with multiple work queues, each work queue having a dedicated interrupt. A work queue can be enabled at any time with its associated interrupt unmasked while other work queues are already active. Having all interrupts released and MSI-X disabled to enable the new work queue will impact active work queues. This series builds on the recent interrupt sub-system core changes that added support for dynamic MSI-X allocation after initial MSI-X enabling. Add support for dynamic MSI-X allocation to vfio-pci. A flag indicating lack of support for dynamic allocation already exist: VFIO_IRQ_INFO_NORESIZE and has always been set for MSI and MSI-X. With support for dynamic MSI-X the flag is cleared for MSI-X when supported, enabling Qemu to modify its behavior. Any feedback is appreciated Reinette [1] commit 34026364df8e ("PCI/MSI: Provide post-enable dynamic allocation interfaces for MSI-X") [2] https://lore.kernel.org/kvm/MWHPR11MB188603D0D809C1079F5817DC8C099@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/#t Reinette Chatre (10): vfio/pci: Consolidate irq cleanup on MSI/MSI-X disable vfio/pci: Remove negative check on unsigned vector vfio/pci: Prepare for dynamic interrupt context storage vfio/pci: Move to single error path vfio/pci: Use xarray for interrupt context storage vfio/pci: Remove interrupt context counter vfio/pci: Update stale comment vfio/pci: Probe and store ability to support dynamic MSI-X vfio/pci: Support dynamic MSI-X vfio/pci: Clear VFIO_IRQ_INFO_NORESIZE for MSI-X drivers/vfio/pci/vfio_pci_core.c | 10 +- drivers/vfio/pci/vfio_pci_intrs.c | 320 +++++++++++++++++++++--------- include/linux/vfio_pci_core.h | 4 +- include/uapi/linux/vfio.h | 3 + 4 files changed, 234 insertions(+), 103 deletions(-) base-commit: 6a8f57ae2eb07ab39a6f0ccad60c760743051026 -- 2.34.1
