Re: [PATCH v3 12/12] vfio/pci: Report dev_id in VFIO_DEVICE_GET_PCI_HOT_RESET_INFO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Yi,
On 4/1/23 16:44, Yi Liu wrote:
> for the users that accept device fds passed from management stacks to be
> able to figure out the host reset affected devices among the devices
> opened by the user. This is needed as such users do not have BDF (bus,
> devfn) knowledge about the devices it has opened, hence unable to use
> the information reported by existing VFIO_DEVICE_GET_PCI_HOT_RESET_INFO
> to figure out the affected devices.
>
> Signed-off-by: Yi Liu <yi.l.liu@xxxxxxxxx>
> ---
>  drivers/vfio/pci/vfio_pci_core.c | 58 ++++++++++++++++++++++++++++----
>  include/uapi/linux/vfio.h        | 24 ++++++++++++-
>  2 files changed, 74 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
> index 19f5b075d70a..a5a7e148dce1 100644
> --- a/drivers/vfio/pci/vfio_pci_core.c
> +++ b/drivers/vfio/pci/vfio_pci_core.c
> @@ -30,6 +30,7 @@
>  #if IS_ENABLED(CONFIG_EEH)
>  #include <asm/eeh.h>
>  #endif
> +#include <uapi/linux/iommufd.h>
>  
>  #include "vfio_pci_priv.h"
>  
> @@ -767,6 +768,20 @@ static int vfio_pci_get_irq_count(struct vfio_pci_core_device *vdev, int irq_typ
>  	return 0;
>  }
>  
> +static struct vfio_device *
> +vfio_pci_find_device_in_devset(struct vfio_device_set *dev_set,
> +			       struct pci_dev *pdev)
> +{
> +	struct vfio_device *cur;
> +
> +	lockdep_assert_held(&dev_set->lock);
> +
> +	list_for_each_entry(cur, &dev_set->device_list, dev_set_list)
> +		if (cur->dev == &pdev->dev)
> +			return cur;
> +	return NULL;
> +}
> +
>  static int vfio_pci_count_devs(struct pci_dev *pdev, void *data)
>  {
>  	(*(int *)data)++;
> @@ -776,13 +791,20 @@ static int vfio_pci_count_devs(struct pci_dev *pdev, void *data)
>  struct vfio_pci_fill_info {
>  	int max;
>  	int cur;
> +	bool require_devid;
> +	struct iommufd_ctx *iommufd;
> +	struct vfio_device_set *dev_set;
>  	struct vfio_pci_dependent_device *devices;
>  };
>  
>  static int vfio_pci_fill_devs(struct pci_dev *pdev, void *data)
>  {
>  	struct vfio_pci_fill_info *fill = data;
> +	struct vfio_device_set *dev_set = fill->dev_set;
>  	struct iommu_group *iommu_group;
> +	struct vfio_device *vdev;
> +
> +	lockdep_assert_held(&dev_set->lock);
>  
>  	if (fill->cur == fill->max)
>  		return -EAGAIN; /* Something changed, try again */
> @@ -791,7 +813,21 @@ static int vfio_pci_fill_devs(struct pci_dev *pdev, void *data)
>  	if (!iommu_group)
>  		return -EPERM; /* Cannot reset non-isolated devices */
>  
> -	fill->devices[fill->cur].group_id = iommu_group_id(iommu_group);
> +	if (fill->require_devid) {
> +		/*
> +		 * Report dev_id of the devices that are opened as cdev
> +		 * and have the same iommufd with the fill->iommufd.
> +		 * Otherwise, just fill IOMMUFD_INVALID_ID.
> +		 */
> +		vdev = vfio_pci_find_device_in_devset(dev_set, pdev);
> +		if (vdev && vfio_device_cdev_opened(vdev) &&
> +		    fill->iommufd == vfio_iommufd_physical_ictx(vdev))
> +			vfio_iommufd_physical_devid(vdev, &fill->devices[fill->cur].dev_id);
> +		else
> +			fill->devices[fill->cur].dev_id = IOMMUFD_INVALID_ID;
> +	} else {
> +		fill->devices[fill->cur].group_id = iommu_group_id(iommu_group);
> +	}
>  	fill->devices[fill->cur].segment = pci_domain_nr(pdev->bus);
>  	fill->devices[fill->cur].bus = pdev->bus->number;
>  	fill->devices[fill->cur].devfn = pdev->devfn;
> @@ -1230,17 +1266,27 @@ static int vfio_pci_ioctl_get_pci_hot_reset_info(
>  		return -ENOMEM;
>  
>  	fill.devices = devices;
> +	fill.dev_set = vdev->vdev.dev_set;
>  
> +	mutex_lock(&vdev->vdev.dev_set->lock);
> +	if (vfio_device_cdev_opened(&vdev->vdev)) {
> +		fill.require_devid = true;
> +		fill.iommufd = vfio_iommufd_physical_ictx(&vdev->vdev);
> +	}
>  	ret = vfio_pci_for_each_slot_or_bus(vdev->pdev, vfio_pci_fill_devs,
>  					    &fill, slot);
> +	mutex_unlock(&vdev->vdev.dev_set->lock);
>  
>  	/*
>  	 * If a device was removed between counting and filling, we may come up
>  	 * short of fill.max.  If a device was added, we'll have a return of
>  	 * -EAGAIN above.
>  	 */
> -	if (!ret)
> +	if (!ret) {
>  		hdr.count = fill.cur;
> +		if (fill.require_devid)
> +			hdr.flags = VFIO_PCI_HOT_RESET_FLAG_IOMMUFD_DEV_ID;
> +	}
>  
>  reset_info_exit:
>  	if (copy_to_user(arg, &hdr, minsz))
> @@ -2346,12 +2392,10 @@ static bool vfio_dev_in_files(struct vfio_pci_core_device *vdev,
>  static int vfio_pci_is_device_in_set(struct pci_dev *pdev, void *data)
>  {
>  	struct vfio_device_set *dev_set = data;
> -	struct vfio_device *cur;
>  
> -	list_for_each_entry(cur, &dev_set->device_list, dev_set_list)
> -		if (cur->dev == &pdev->dev)
> -			return 0;
> -	return -EBUSY;
> +	lockdep_assert_held(&dev_set->lock);
> +
> +	return vfio_pci_find_device_in_devset(dev_set, pdev) ? 0 : -EBUSY;
>  }
>  
>  /*
> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
> index 25432ef213ee..5a34364e3b94 100644
> --- a/include/uapi/linux/vfio.h
> +++ b/include/uapi/linux/vfio.h
> @@ -650,11 +650,32 @@ enum {
>   * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12,
>   *					      struct vfio_pci_hot_reset_info)
>   *
> + * This command is used to query the affected devices in the hot reset for
> + * a given device.  User could use the information reported by this command
> + * to figure out the affected devices among the devices it has opened.
> + * This command always reports the segment, bus and devfn information for
> + * each affected device, and selectively report the group_id or the dev_id
> + * per the way how the device being queried is opened.
> + *	- If the device is opened via the traditional group/container manner,
> + *	  this command reports the group_id for each affected device.
> + *
> + *	- If the device is opened as a cdev, this command needs to report
s/needs to report/reports
> + *	  dev_id for each affected device and set the
> + *	  VFIO_PCI_HOT_RESET_FLAG_IOMMUFD_DEV_ID flag.  For the affected
> + *	  devices that are not opened as cdev or bound to different iommufds
> + *	  with the device that is queried, report an invalid dev_id to avoid
s/bound to different iommufds with the device that is queried/bound to
iommufds different from the reset device one?
> + *	  potential dev_id conflict as dev_id is local to iommufd.  For such
> + *	  affected devices, user shall fall back to use the segment, bus and
> + *	  devfn info to map it to opened device.
> + *
>   * Return: 0 on success, -errno on failure:
>   *	-enospc = insufficient buffer, -enodev = unsupported for device.
>   */
>  struct vfio_pci_dependent_device {
> -	__u32	group_id;
> +	union {
> +		__u32   group_id;
> +		__u32	dev_id;
> +	};
>  	__u16	segment;
>  	__u8	bus;
>  	__u8	devfn; /* Use PCI_SLOT/PCI_FUNC */
> @@ -663,6 +684,7 @@ struct vfio_pci_dependent_device {
>  struct vfio_pci_hot_reset_info {
>  	__u32	argsz;
>  	__u32	flags;
> +#define VFIO_PCI_HOT_RESET_FLAG_IOMMUFD_DEV_ID	(1 << 0)
>  	__u32	count;
>  	struct vfio_pci_dependent_device	devices[];
>  };
Eric




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux