Re: [RFC PATCH 00/32] ACPI/arm64: add support for virtual cpuhotplug

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi James,

On 2/3/23 21:50, James Morse wrote:
Hello!

This series adds what looks like cpuhotplug support to arm64 for use in
virtual machines. It does this by moving the cpu_register() calls for
architectures that support ACPI out of the arch code by using
GENERIC_CPU_DEVICES, then into the ACPI processor driver.

The kubernetes folk really want to be able to add CPUs to an existing VM,
in exactly the same way they do on x86. The use-case is pre-booting guests
with one CPU, then adding the number that were actually needed when the
workload is provisioned.

Wait? Doesn't arm64 support cpuhotplug already!?
In the arm world, cpuhotplug gets used to mean removing the power from a CPU.
The CPU is offline, and remains present. For x86, and ACPI, cpuhotplug
has the additional step of physically removing the CPU, so that it isn't
present anymore.

Arm64 doesn't support this, and can't support it: CPUs are really a slice
of the SoC, and there is not enough information in the existing ACPI tables
to describe which bits of the slice also got removed. Without a reference
machine: adding this support to the spec is a wild goose chase.

Critically: everything described in the firmware tables must remain present.

For a virtual machine this is easy as all the other bits of 'virtual SoC'
are emulated, so they can (and do) remain present when a vCPU is 'removed'.

On a system that supports cpuhotplug the MADT has to describe every possible
CPU at boot. Under KVM, the vGIC needs to know about every possible vCPU before
the guest is started.
With these constraints, virtual-cpuhotplug is really just a hypervisor/firmware
policy about which CPUs can be brought online.

This series adds support for virtual-cpuhotplug as exactly that: firmware
policy. This may even work on a physical machine too; for a guest the part of
firmware is played by the VMM. (typically Qemu).

PSCI support is modified to return 'DENIED' if the CPU can't be brought
online/enabled yet. The CPU object's _STA method's enabled bit is used to
indicate firmware's current disposition. If the CPU has its enabled bit clear,
it will not be registered with sysfs, and attempts to bring it online will
fail. The notifications that _STA has changed its value then work in the same
way as physical hotplug, and firmware can cause the CPU to be registered some
time later, allowing it to be brought online.

This creates something that looks like cpuhotplug to user-space, as the sysfs
files appear and disappear, and the udev notifications look the same.

One notable difference is the CPU present mask, which is exposed via sysfs.
Because the CPUs remain present throughout, they can still be seen in that mask.
This value does get used by webbrowsers to estimate the number of CPUs
as the CPU online mask is constantly changed on mobile phones.

Linux is tolerant of PSCI returning errors, as its always been allowed to do
that. To avoid confusing OS that can't tolerate this, we needed an additional
bit in the MADT GICC flags. This series copies ACPI_MADT_ONLINE_CAPABLE, which
appears to be for this purpose, but calls it ACPI_MADT_GICC_CPU_CAPABLE as it
has a different bit position in the GICC.

This code is unconditionally enabled for all ACPI architectures.
If there are problems with firmware tables on some devices, the CPUs will
already be online by the time the acpi_processor_make_enabled() is called.
A mismatch here causes a firmware-bug message and kernel taint. This should
only affect people with broken firmware who also boot with maxcpus=1, and
bring CPUs online later.

I had a go at switching the remaining architectures over to GENERIC_CPU_DEVICES,
so that the Kconfig symbol can be removed, but I got stuck with powerpc
and s390.


The first patch has already been posted as a fix here:
https://www.spinics.net/lists/linux-ia64/msg21920.html
I've only build tested Loongarch and ia64.


If folk want to play along at home, you'll need a copy of Qemu that supports this.
https://github.com/salil-mehta/qemu.git salil/virt-cpuhp-armv8/rfc-v1-port29092022.psci.present

You'll need to fix the numbers of KVM_CAP_ARM_HVC_TO_USER and KVM_CAP_ARM_PSCI_TO_USER
to match your host kernel. Replace your '-smp' argument with something like:
| -smp cpus=1,maxcpus=3,cores=3,threads=1,sockets=1

then feed the following to the Qemu montior;
| (qemu) device_add driver=host-arm-cpu,core-id=1,id=cpu1
| (qemu) device_del cpu1


This series is based on v6.2-rc3, and can be retrieved from:
https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git/ virtual_cpu_hotplug/rfc/v1

I applied this patch series on v6.2-rc3 and using the QEMU cloned from the salil-mehta/qemu.git repo. But when I try to run the QEMU, it shows:

$ qemu-system-aarch64: -accel kvm: Failed to enable KVM_CAP_ARM_PSCI_TO_USER cap.

Here is the command I use:

$ qemu-system-aarch64
-machine virt
-bios /usr/share/qemu-efi-aarch64/QEMU_EFI.fd
-accel kvm
-m 4096
-smp cpus=1,maxcpus=3,cores=3,threads=1,sockets=1
-cpu host
-qmp unix:./src.socket,server,nowait
-hda ./XXX.qcow2
-serial unix:./src.serial,server,nowait
-monitor stdio

It seems something related to your notice: You'll need to fix the numbers of KVM_CAP_ARM_HVC_TO_USER and KVM_CAP_ARM_PSCI_TO_USER
to match your host kernel.

But I'm not actually understand what should I fix, since I haven't review the patch series. Could you give me some more information? Maybe I'm doing something wrong.

Thanks,



Thanks,

James Morse (29):
   ia64: Fix build error due to switch case label appearing next to
     declaration
   ACPI: Move ACPI_HOTPLUG_CPU to be enabled per architecture
   drivers: base: Use present CPUs in GENERIC_CPU_DEVICES
   drivers: base: Allow parts of GENERIC_CPU_DEVICES to be overridden
   drivers: base: Move cpu_dev_init() after node_dev_init()
   arm64: setup: Switch over to GENERIC_CPU_DEVICES using
     arch_register_cpu()
   ia64/topology: Switch over to GENERIC_CPU_DEVICES
   x86/topology: Switch over to GENERIC_CPU_DEVICES
   LoongArch: Switch over to GENERIC_CPU_DEVICES
   arch_topology: Make register_cpu_capacity_sysctl() tolerant to late
     CPUs
   ACPI: processor: Add support for processors described as container
     packages
   ACPI: processor: Register CPUs that are online, but not described in
     the DSDT
   ACPI: processor: Register all CPUs from acpi_processor_get_info()
   ACPI: Rename ACPI_HOTPLUG_CPU to include 'present'
   ACPI: Move acpi_bus_trim_one() before acpi_scan_hot_remove()
   ACPI: Rename acpi_processor_hotadd_init and remove pre-processor
     guards
   ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug
   ACPI: Check _STA present bit before making CPUs not present
   ACPI: Warn when the present bit changes but the feature is not enabled
   drivers: base: Implement weak arch_unregister_cpu()
   LoongArch: Use the __weak version of arch_unregister_cpu()
   arm64: acpi: Move get_cpu_for_acpi_id() to a header
   ACPICA: Add new MADT GICC flags fields [code first?]
   arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a
     helper
   irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc()
   irqchip/gic-v3: Add support for ACPI's disabled but 'online capable'
     CPUs
   ACPI: add support to register CPUs based on the _STA enabled bit
   arm64: document virtual CPU hotplug's expectations
   cpumask: Add enabled cpumask for present CPUs that can be brought
     online

Jean-Philippe Brucker (3):
   arm64: psci: Ignore DENIED CPUs
   KVM: arm64: Pass hypercalls to userspace
   KVM: arm64: Pass PSCI calls to userspace

  Documentation/arm64/cpu-hotplug.rst       |  79 ++++++++++++
  Documentation/arm64/index.rst             |   1 +
  Documentation/virt/kvm/api.rst            |  31 ++++-
  Documentation/virt/kvm/arm/hypercalls.rst |   1 +
  arch/arm64/Kconfig                        |   1 +
  arch/arm64/include/asm/acpi.h             |  11 ++
  arch/arm64/include/asm/cpu.h              |   1 -
  arch/arm64/include/asm/kvm_host.h         |   2 +
  arch/arm64/kernel/acpi_numa.c             |  11 --
  arch/arm64/kernel/psci.c                  |   2 +-
  arch/arm64/kernel/setup.c                 |  13 +-
  arch/arm64/kernel/smp.c                   |   5 +-
  arch/arm64/kvm/arm.c                      |  15 ++-
  arch/arm64/kvm/hypercalls.c               |  28 ++++-
  arch/arm64/kvm/psci.c                     |  13 ++
  arch/ia64/Kconfig                         |   2 +
  arch/ia64/include/asm/acpi.h              |   2 +-
  arch/ia64/include/asm/cpu.h               |  11 --
  arch/ia64/kernel/acpi.c                   |   6 +-
  arch/ia64/kernel/setup.c                  |   2 +-
  arch/ia64/kernel/sys_ia64.c               |   7 +-
  arch/ia64/kernel/topology.c               |  35 +-----
  arch/loongarch/Kconfig                    |   2 +
  arch/loongarch/kernel/topology.c          |  31 +----
  arch/x86/Kconfig                          |   2 +
  arch/x86/include/asm/cpu.h                |   6 -
  arch/x86/kernel/acpi/boot.c               |   4 +-
  arch/x86/kernel/topology.c                |  19 +--
  drivers/acpi/Kconfig                      |   5 +-
  drivers/acpi/acpi_processor.c             | 146 +++++++++++++++++-----
  drivers/acpi/processor_core.c             |   2 +-
  drivers/acpi/scan.c                       | 116 +++++++++++------
  drivers/base/arch_topology.c              |  38 ++++--
  drivers/base/cpu.c                        |  31 ++++-
  drivers/base/init.c                       |   2 +-
  drivers/firmware/psci/psci.c              |   2 +
  drivers/irqchip/irq-gic-v3.c              |  38 +++---
  include/acpi/acpi_bus.h                   |   1 +
  include/acpi/actbl2.h                     |   1 +
  include/kvm/arm_hypercalls.h              |   1 +
  include/kvm/arm_psci.h                    |   4 +
  include/linux/acpi.h                      |  10 +-
  include/linux/cpu.h                       |   6 +
  include/linux/cpumask.h                   |  25 ++++
  include/uapi/linux/kvm.h                  |   2 +
  kernel/cpu.c                              |   3 +
  46 files changed, 532 insertions(+), 244 deletions(-)
  create mode 100644 Documentation/arm64/cpu-hotplug.rst


--
Shaoqin




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux