The pmu-chain-promotion test is composed of several subtests.
In case of failures, the current logs are really dificult to
analyze since they look very similar and sometimes duplicated
for each subtest. Add prefixes for each subtest and introduce
a macro that prints the registers we are mostly interested in,
namerly the 2 first counters and the overflow counter.
Signed-off-by: Eric Auger <eric.auger@xxxxxxxxxx>
---
arm/pmu.c | 63 ++++++++++++++++++++++++++++---------------------------
1 file changed, 32 insertions(+), 31 deletions(-)
diff --git a/arm/pmu.c b/arm/pmu.c
index f6e95012..dad7d4b4 100644
--- a/arm/pmu.c
+++ b/arm/pmu.c
@@ -715,6 +715,11 @@ static void test_chained_sw_incr(bool unused)
report_info("overflow=0x%lx, #0=0x%lx #1=0x%lx", read_sysreg(pmovsclr_el0),
read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1));
}
+#define PRINT_REGS(__s) \
+ report_info("%s #1=0x%lx #0=0x%lx overflow=0x%lx", __s, \
+ read_regn_el0(pmevcntr, 1), \
+ read_regn_el0(pmevcntr, 0), \
+ read_sysreg(pmovsclr_el0))
static void test_chain_promotion(bool unused)
{
@@ -725,6 +730,7 @@ static void test_chain_promotion(bool unused)
return;
/* Only enable CHAIN counter */
+ report_prefix_push("subtest1");
pmu_reset();
write_regn_el0(pmevtyper, 0, MEM_ACCESS | PMEVTYPER_EXCLUDE_EL0);
write_regn_el0(pmevtyper, 1, CHAIN | PMEVTYPER_EXCLUDE_EL0);
@@ -732,83 +738,81 @@ static void test_chain_promotion(bool unused)
isb();
mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
+ PRINT_REGS("post");
report(!read_regn_el0(pmevcntr, 0),
"chain counter not counting if even counter is disabled");
+ report_prefix_pop();
/* Only enable even counter */
+ report_prefix_push("subtest2");
pmu_reset();
write_regn_el0(pmevcntr, 0, PRE_OVERFLOW_32);
write_sysreg_s(0x1, PMCNTENSET_EL0);
isb();
mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
+ PRINT_REGS("post");
report(!read_regn_el0(pmevcntr, 1) && (read_sysreg(pmovsclr_el0) == 0x1),
"odd counter did not increment on overflow if disabled");
- report_info("MEM_ACCESS counter #0 has value 0x%lx",
- read_regn_el0(pmevcntr, 0));
- report_info("CHAIN counter #1 has value 0x%lx",
- read_regn_el0(pmevcntr, 1));
- report_info("overflow counter 0x%lx", read_sysreg(pmovsclr_el0));
+ report_prefix_pop();
/* start at 0xFFFFFFDC, +20 with CHAIN enabled, +20 with CHAIN disabled */
+ report_prefix_push("subtest3");
pmu_reset();
write_sysreg_s(0x3, PMCNTENSET_EL0);
write_regn_el0(pmevcntr, 0, PRE_OVERFLOW2_32);
isb();
+ PRINT_REGS("init");
mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
- report_info("MEM_ACCESS counter #0 has value 0x%lx",
- read_regn_el0(pmevcntr, 0));
+ PRINT_REGS("After 1st loop");
/* disable the CHAIN event */
write_sysreg_s(0x2, PMCNTENCLR_EL0);
mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
- report_info("MEM_ACCESS counter #0 has value 0x%lx",
- read_regn_el0(pmevcntr, 0));
+ PRINT_REGS("After 2d loop");
report(read_sysreg(pmovsclr_el0) == 0x1,
"should have triggered an overflow on #0");
report(!read_regn_el0(pmevcntr, 1),
"CHAIN counter #1 shouldn't have incremented");
+ report_prefix_pop();
/* start at 0xFFFFFFDC, +20 with CHAIN disabled, +20 with CHAIN enabled */
+ report_prefix_push("subtest4");
pmu_reset();
write_sysreg_s(0x1, PMCNTENSET_EL0);
write_regn_el0(pmevcntr, 0, PRE_OVERFLOW2_32);
isb();
- report_info("counter #0 = 0x%lx, counter #1 = 0x%lx overflow=0x%lx",
- read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1),
- read_sysreg(pmovsclr_el0));
+ PRINT_REGS("init");
mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
- report_info("MEM_ACCESS counter #0 has value 0x%lx",
- read_regn_el0(pmevcntr, 0));
+ PRINT_REGS("After 1st loop");
/* enable the CHAIN event */
write_sysreg_s(0x3, PMCNTENSET_EL0);
isb();
mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
- report_info("MEM_ACCESS counter #0 has value 0x%lx",
- read_regn_el0(pmevcntr, 0));
+
+ PRINT_REGS("After 2d loop");
report((read_regn_el0(pmevcntr, 1) == 1) &&
(read_sysreg(pmovsclr_el0) == 0x1),
"CHAIN counter enabled: CHAIN counter was incremented and overflow");
-
- report_info("CHAIN counter #1 = 0x%lx, overflow=0x%lx",
- read_regn_el0(pmevcntr, 1), read_sysreg(pmovsclr_el0));
+ report_prefix_pop();
/* start as MEM_ACCESS/CPU_CYCLES and move to CHAIN/MEM_ACCESS */
+ report_prefix_push("subtest5");
pmu_reset();
write_regn_el0(pmevtyper, 0, MEM_ACCESS | PMEVTYPER_EXCLUDE_EL0);
write_regn_el0(pmevtyper, 1, CPU_CYCLES | PMEVTYPER_EXCLUDE_EL0);
write_sysreg_s(0x3, PMCNTENSET_EL0);
write_regn_el0(pmevcntr, 0, PRE_OVERFLOW2_32);
isb();
+ PRINT_REGS("init");
mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
- report_info("MEM_ACCESS counter #0 has value 0x%lx",
- read_regn_el0(pmevcntr, 0));
+ PRINT_REGS("After 1st loop");
/* 0 becomes CHAINED */
write_sysreg_s(0x0, PMCNTENSET_EL0);
@@ -817,37 +821,34 @@ static void test_chain_promotion(bool unused)
write_regn_el0(pmevcntr, 1, 0x0);
mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
- report_info("MEM_ACCESS counter #0 has value 0x%lx",
- read_regn_el0(pmevcntr, 0));
+ PRINT_REGS("After 2d loop");
report((read_regn_el0(pmevcntr, 1) == 1) &&
(read_sysreg(pmovsclr_el0) == 0x1),
"32b->64b: CHAIN counter incremented and overflow");
-
- report_info("CHAIN counter #1 = 0x%lx, overflow=0x%lx",
- read_regn_el0(pmevcntr, 1), read_sysreg(pmovsclr_el0));
+ report_prefix_pop();
/* start as CHAIN/MEM_ACCESS and move to MEM_ACCESS/CPU_CYCLES */
+ report_prefix_push("subtest6");
pmu_reset();
write_regn_el0(pmevtyper, 0, MEM_ACCESS | PMEVTYPER_EXCLUDE_EL0);
write_regn_el0(pmevtyper, 1, CHAIN | PMEVTYPER_EXCLUDE_EL0);
write_regn_el0(pmevcntr, 0, PRE_OVERFLOW2_32);
write_sysreg_s(0x3, PMCNTENSET_EL0);
+ PRINT_REGS("init");
mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
- report_info("counter #0=0x%lx, counter #1=0x%lx",
- read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1));
+ PRINT_REGS("After 1st loop");
write_sysreg_s(0x0, PMCNTENSET_EL0);
write_regn_el0(pmevtyper, 1, CPU_CYCLES | PMEVTYPER_EXCLUDE_EL0);
write_sysreg_s(0x3, PMCNTENSET_EL0);
mem_access_loop(addr, 20, pmu.pmcr_ro | PMU_PMCR_E);
+ PRINT_REGS("After 2d loop");
report(read_sysreg(pmovsclr_el0) == 1,
"overflow is expected on counter 0");
- report_info("counter #0=0x%lx, counter #1=0x%lx overflow=0x%lx",
- read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1),
- read_sysreg(pmovsclr_el0));
+ report_prefix_pop();
}
static bool expect_interrupts(uint32_t bitmap)
--
2.38.1
