RE: [PATCH v5 16/19] vfio: Add VFIO_DEVICE_BIND_IOMMUFD

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Alexey Kardashevskiy <aik@xxxxxxx>
> Sent: Friday, March 10, 2023 10:39 AM
> 
> On 27/2/23 22:11, Yi Liu wrote:
> > This adds ioctl for userspace to bind device cdev fd to iommufd.
> >
> >      VFIO_DEVICE_BIND_IOMMUFD: bind device to an iommufd, hence gain
> DMA
> > 			      control provided by the iommufd. open_device
> > 			      op is called after bind_iommufd op.
> > 			      VFIO no iommu mode is indicated by passing
> > 			      a negative iommufd value.
> >
> > Signed-off-by: Yi Liu <yi.l.liu@xxxxxxxxx>
> > ---
> >   drivers/vfio/device_cdev.c | 146
> +++++++++++++++++++++++++++++++++++++
> >   drivers/vfio/vfio.h        |  17 ++++-
> >   drivers/vfio/vfio_main.c   |  54 ++++++++++++--
> >   include/linux/iommufd.h    |   6 ++
> >   include/uapi/linux/vfio.h  |  34 +++++++++
> >   5 files changed, 248 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/vfio/device_cdev.c b/drivers/vfio/device_cdev.c
> > index 9e2c1ecaaf4f..37f80e368551 100644
> > --- a/drivers/vfio/device_cdev.c
> > +++ b/drivers/vfio/device_cdev.c
> > @@ -3,6 +3,7 @@
> >    * Copyright (c) 2023 Intel Corporation.
> >    */
> >   #include <linux/vfio.h>
> > +#include <linux/iommufd.h>
> >
> >   #include "vfio.h"
> >
> > @@ -45,6 +46,151 @@ int vfio_device_fops_cdev_open(struct inode
> *inode, struct file *filep)
> >   	return ret;
> >   }
> >
> > +static void vfio_device_get_kvm_safe(struct vfio_device_file *df)
> > +{
> > +	spin_lock(&df->kvm_ref_lock);
> > +	if (!df->kvm)
> > +		goto unlock;
> > +
> > +	_vfio_device_get_kvm_safe(df->device, df->kvm);
> > +
> > +unlock:
> > +	spin_unlock(&df->kvm_ref_lock);
> > +}
> > +
> > +void vfio_device_cdev_close(struct vfio_device_file *df)
> > +{
> > +	struct vfio_device *device = df->device;
> > +
> > +	mutex_lock(&device->dev_set->lock);
> > +	/*
> > +	 * As df->access_granted writer is under dev_set->lock as well,
> > +	 * so this read no need to use smp_load_acquire() to pair with
> > +	 * smp_store_release() in the caller of vfio_device_open().
> > +	 */

device->open_count is sure to be non-zero if df->access_granted
is true. Otherwise, it means this device file has not opened device
successfully, so no need to do further tidy up.

> > +	if (!df->access_granted) {
> > +		mutex_unlock(&device->dev_set->lock);
> > +		return;
> > +	}
> > +	vfio_device_close(df);
> > +	vfio_device_put_kvm(device);
> > +	if (df->iommufd)
> > +		iommufd_ctx_put(df->iommufd);
> > +	mutex_unlock(&device->dev_set->lock);
> > +	vfio_device_unblock_group(device);
> > +}
> > +
> > +static struct iommufd_ctx *vfio_get_iommufd_from_fd(int fd)
> > +{
> > +	struct fd f;
> > +	struct iommufd_ctx *iommufd;
> > +
> > +	f = fdget(fd);
> > +	if (!f.file)
> > +		return ERR_PTR(-EBADF);
> > +
> > +	iommufd = iommufd_ctx_from_file(f.file);
> > +
> > +	fdput(f);
> > +	return iommufd;
> > +}
> > +
> > +long vfio_device_ioctl_bind_iommufd(struct vfio_device_file *df,
> > +				    unsigned long arg)
> > +{
> > +	struct vfio_device *device = df->device;
> > +	struct vfio_device_bind_iommufd bind;
> > +	struct iommufd_ctx *iommufd = NULL;
> > +	unsigned long minsz;
> > +	int ret;
> > +
> > +	minsz = offsetofend(struct vfio_device_bind_iommufd, out_devid);
> > +
> > +	if (copy_from_user(&bind, (void __user *)arg, minsz))
> > +		return -EFAULT;
> > +
> > +	if (bind.argsz < minsz || bind.flags)
> > +		return -EINVAL;
> > +
> > +	if (!device->ops->bind_iommufd)
> > +		return -ENODEV;
> > +
> > +	ret = vfio_device_block_group(device);
> > +	if (ret)
> > +		return ret;
> > +
> > +	mutex_lock(&device->dev_set->lock);
> > +	/*
> > +	 * If already been bound to an iommufd, or already set noiommu
> > +	 * then fail it.
> > +	 */
> > +	if (df->iommufd || df->noiommu) {
> > +		ret = -EINVAL;
> > +		goto out_unlock;
> > +	}
> > +
> > +	/* iommufd < 0 means noiommu mode */
> > +	if (bind.iommufd < 0) {
> > +		if (!capable(CAP_SYS_RAWIO)) {
> > +			ret = -EPERM;
> > +			goto out_unlock;
> > +		}
> > +		df->noiommu = true;
> > +	} else {
> > +		iommufd = vfio_get_iommufd_from_fd(bind.iommufd);
> > +		if (IS_ERR(iommufd)) {
> > +			ret = PTR_ERR(iommufd);
> > +			goto out_unlock;
> > +		}
> > +	}
> > +
> > +	/*
> > +	 * Before the device open, get the KVM pointer currently
> > +	 * associated with the device file (if there is) and obtain
> > +	 * a reference.  This reference is held until device closed.
> > +	 * Save the pointer in the device for use by drivers.
> > +	 */
> > +	vfio_device_get_kvm_safe(df);
> > +
> > +	df->iommufd = iommufd;
> > +	ret = vfio_device_open(df, &bind.out_devid, NULL);
> 
> 
> This is unrelated to this patch but reminded me - while debugging QEMU,
> vfio_assert_device_open() kept firing as I was killing QEMU (which in
> turn made the kernel close all fds), device->open_count==0 as QEMU was
> dying before calling ioctl(VFIO_DEVICE_BIND_IOMMUFD) which would call
> this vfio_device_open() just above. Has this been reported/fixed, just
> curious?

Thanks, I think this was fixed by the code I marked above. I think
it was raised in v2 review. Should have been fixed after that. Have
tried v5 or v6? If still have issue, please feel free let me know it.

https://lore.kernel.org/kvm/Y+HIWRM%2FTjWcuT6I@xxxxxxxxxxxxxxxxxxxxxxxxx/

Regards,
Yi Liu




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux