Re: [REPOST PATCH 08/16] selftests: KVM: aarch64: Consider PMU event filters for VM creation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Reiji,

On Thu, Mar 2, 2023 at 8:31 PM Reiji Watanabe <reijiw@xxxxxxxxxx> wrote:
>
> Hi Raghu,
>
> On Tue, Feb 14, 2023 at 5:07 PM Raghavendra Rao Ananta
> <rananta@xxxxxxxxxx> wrote:
> >
> > Accept a list of KVM PMU event filters as an argument while creating
> > a VM via create_vpmu_vm(). Upcoming patches would leverage this to
> > test the event filters' functionality.
> >
> > No functional change intended.
> >
> > Signed-off-by: Raghavendra Rao Ananta <rananta@xxxxxxxxxx>
> > ---
> >  .../testing/selftests/kvm/aarch64/vpmu_test.c | 64 +++++++++++++++++--
> >  1 file changed, 60 insertions(+), 4 deletions(-)
> >
> > diff --git a/tools/testing/selftests/kvm/aarch64/vpmu_test.c b/tools/testing/selftests/kvm/aarch64/vpmu_test.c
> > index 15aebc7d7dc94..2b3a4fa3afa9c 100644
> > --- a/tools/testing/selftests/kvm/aarch64/vpmu_test.c
> > +++ b/tools/testing/selftests/kvm/aarch64/vpmu_test.c
> > @@ -15,10 +15,14 @@
> >  #include <vgic.h>
> >  #include <asm/perf_event.h>
> >  #include <linux/bitfield.h>
> > +#include <linux/bitmap.h>
> >
> >  /* The max number of the PMU event counters (excluding the cycle counter) */
> >  #define ARMV8_PMU_MAX_GENERAL_COUNTERS (ARMV8_PMU_MAX_COUNTERS - 1)
> >
> > +/* The max number of event numbers that's supported */
> > +#define ARMV8_PMU_MAX_EVENTS           64
>
> The name and the comment would be a bit misleading.
> (This sounds like a max number of events that are supported by ARMv8)
>
> Perhaps 'MAX_EVENT_FILTER_BITS' would be more clear ?
>
>
You are right. It should actually represent the event filter bits.
Even the value is incorrect. It should be 16 and would change the loop
iteration logic in guest_event_filter_test(). Thanks for catching
this!
> > +
> >  /*
> >   * The macros and functions below for reading/writing PMEV{CNTR,TYPER}<n>_EL0
> >   * were basically copied from arch/arm64/kernel/perf_event.c.
> > @@ -224,6 +228,8 @@ struct pmc_accessor pmc_accessors[] = {
> >         { read_sel_evcntr, write_pmevcntrn, read_sel_evtyper, write_pmevtypern },
> >  };
> >
> > +#define MAX_EVENT_FILTERS_PER_VM 10
>
> (Looking at just this patch,) it appears 'PER_VM' in the name
> might be rather misleading ?
>
Probably it's not clear. It should represent the max number of event
filter configurations that can be applied to a VM. Would a comment
help?

> > +
> >  #define INVALID_EC     (-1ul)
> >  uint64_t expected_ec = INVALID_EC;
> >  uint64_t op_end_addr;
> > @@ -232,6 +238,7 @@ struct vpmu_vm {
> >         struct kvm_vm *vm;
> >         struct kvm_vcpu *vcpu;
> >         int gic_fd;
> > +       unsigned long *pmu_filter;
> >  };
> >
> >  enum test_stage {
> > @@ -541,8 +548,51 @@ static void guest_code(void)
> >  #define GICD_BASE_GPA  0x8000000ULL
> >  #define GICR_BASE_GPA  0x80A0000ULL
> >
> > +static unsigned long *
> > +set_event_filters(struct kvm_vcpu *vcpu, struct kvm_pmu_event_filter *pmu_event_filters)
>
> Can you add a comment that explains the function ?
> (especially for @pmu_event_filters and the return value ?)
>
Yes, I'll add a comment
> > +{
> > +       int j;
> > +       unsigned long *pmu_filter;
> > +       struct kvm_device_attr filter_attr = {
> > +               .group = KVM_ARM_VCPU_PMU_V3_CTRL,
> > +               .attr = KVM_ARM_VCPU_PMU_V3_FILTER,
> > +       };
> > +
> > +       /*
> > +        * Setting up of the bitmap is similar to what KVM does.
> > +        * If the first filter denys an event, default all the others to allow, and vice-versa.
> > +        */
> > +       pmu_filter = bitmap_zalloc(ARMV8_PMU_MAX_EVENTS);
> > +       TEST_ASSERT(pmu_filter, "Failed to allocate the pmu_filter");
> > +
> > +       if (pmu_event_filters[0].action == KVM_PMU_EVENT_DENY)
> > +               bitmap_fill(pmu_filter, ARMV8_PMU_MAX_EVENTS);
> > +
> > +       for (j = 0; j < MAX_EVENT_FILTERS_PER_VM; j++) {
> > +               struct kvm_pmu_event_filter *pmu_event_filter = &pmu_event_filters[j];
> > +
> > +               if (!pmu_event_filter->nevents)
>
> What does this mean ? (the end of the valid entry in the array ?)
>
Yes, it should represent the end of an array. I can add a comment if
it's unclear.
>
> > +                       break;
> > +
> > +               pr_debug("Applying event filter:: event: 0x%x; action: %s\n",
> > +                               pmu_event_filter->base_event,
> > +                               pmu_event_filter->action == KVM_PMU_EVENT_ALLOW ? "ALLOW" : "DENY");
> > +
> > +               filter_attr.addr = (uint64_t) pmu_event_filter;
> > +               vcpu_ioctl(vcpu, KVM_SET_DEVICE_ATTR, &filter_attr);
> > +
> > +               if (pmu_event_filter->action == KVM_PMU_EVENT_ALLOW)
> > +                       __set_bit(pmu_event_filter->base_event, pmu_filter);
> > +               else
> > +                       __clear_bit(pmu_event_filter->base_event, pmu_filter);
> > +       }
> > +
> > +       return pmu_filter;
> > +}
> > +
> >  /* Create a VM that has one vCPU with PMUv3 configured. */
> > -static struct vpmu_vm *create_vpmu_vm(void *guest_code)
> > +static struct vpmu_vm *
> > +create_vpmu_vm(void *guest_code, struct kvm_pmu_event_filter *pmu_event_filters)
> >  {
> >         struct kvm_vm *vm;
> >         struct kvm_vcpu *vcpu;
> > @@ -586,6 +636,9 @@ static struct vpmu_vm *create_vpmu_vm(void *guest_code)
> >                     "Unexpected PMUVER (0x%x) on the vCPU with PMUv3", pmuver);
> >
> >         /* Initialize vPMU */
> > +       if (pmu_event_filters)
> > +               vpmu_vm->pmu_filter = set_event_filters(vcpu, pmu_event_filters);
> > +
> >         vcpu_ioctl(vcpu, KVM_SET_DEVICE_ATTR, &irq_attr);
> >         vcpu_ioctl(vcpu, KVM_SET_DEVICE_ATTR, &init_attr);
> >
> > @@ -594,6 +647,8 @@ static struct vpmu_vm *create_vpmu_vm(void *guest_code)
> >
> >  static void destroy_vpmu_vm(struct vpmu_vm *vpmu_vm)
> >  {
> > +       if (vpmu_vm->pmu_filter)
> > +               bitmap_free(vpmu_vm->pmu_filter);
> >         close(vpmu_vm->gic_fd);
> >         kvm_vm_free(vpmu_vm->vm);
> >         free(vpmu_vm);
> > @@ -631,7 +686,7 @@ static void run_counter_access_test(uint64_t pmcr_n)
> >         guest_data.expected_pmcr_n = pmcr_n;
> >
> >         pr_debug("Test with pmcr_n %lu\n", pmcr_n);
> > -       vpmu_vm = create_vpmu_vm(guest_code);
> > +       vpmu_vm = create_vpmu_vm(guest_code, NULL);
> >         vcpu = vpmu_vm->vcpu;
> >
> >         /* Save the initial sp to restore them later to run the guest again */
> > @@ -676,7 +731,7 @@ static void run_counter_access_error_test(uint64_t pmcr_n)
> >         guest_data.expected_pmcr_n = pmcr_n;
> >
> >         pr_debug("Error test with pmcr_n %lu (larger than the host)\n", pmcr_n);
> > -       vpmu_vm = create_vpmu_vm(guest_code);
> > +       vpmu_vm = create_vpmu_vm(guest_code, NULL);
> >         vcpu = vpmu_vm->vcpu;
> >
> >         /* Update the PMCR_EL0.N with @pmcr_n */
> > @@ -719,9 +774,10 @@ static uint64_t get_pmcr_n_limit(void)
> >         struct vpmu_vm *vpmu_vm;
> >         uint64_t pmcr;
> >
> > -       vpmu_vm = create_vpmu_vm(guest_code);
> > +       vpmu_vm = create_vpmu_vm(guest_code, NULL);
> >         vcpu_get_reg(vpmu_vm->vcpu, KVM_ARM64_SYS_REG(SYS_PMCR_EL0), &pmcr);
> >         destroy_vpmu_vm(vpmu_vm);
> > +
> >         return FIELD_GET(ARMV8_PMU_PMCR_N, pmcr);
> >  }
>
> Thank you,
> Reiji
>
>
> >
> > --
> > 2.39.1.581.gbfd45094c4-goog
> >




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux