On Fri, Jan 13, 2023 at 3:45 AM Andrew Jones <ajones@xxxxxxxxxxxxxxxx> wrote:
>
> On Thu, Dec 15, 2022 at 09:00:45AM -0800, Atish Patra wrote:
> > RISC-V SBI PMU & Sscofpmf ISA extension allows supporting perf in
> > the virtualization enviornment as well. KVM implementation
> > relies on SBI PMU extension for most the most part while trapping
>
> s/most the most/the most/
>
Done.
> > & emulating the CSRs read for counter access.
> >
> > This patch doesn't have the event sampling support yet.
> >
> > Signed-off-by: Atish Patra <atishp@xxxxxxxxxxxx>
> > ---
> > arch/riscv/kvm/vcpu_pmu.c | 358 ++++++++++++++++++++++++++++++++++++--
> > 1 file changed, 342 insertions(+), 16 deletions(-)
> >
> > diff --git a/arch/riscv/kvm/vcpu_pmu.c b/arch/riscv/kvm/vcpu_pmu.c
> > index 53c4163..21c1f0f 100644
> > --- a/arch/riscv/kvm/vcpu_pmu.c
> > +++ b/arch/riscv/kvm/vcpu_pmu.c
> > @@ -12,10 +12,163 @@
> > #include <linux/perf/riscv_pmu.h>
> > #include <asm/csr.h>
> > #include <asm/kvm_vcpu_sbi.h>
> > +#include <asm/bitops.h>
> > #include <asm/kvm_vcpu_pmu.h>
> > #include <linux/kvm_host.h>
> >
> > #define kvm_pmu_num_counters(pmu) ((pmu)->num_hw_ctrs + (pmu)->num_fw_ctrs)
> > +#define get_event_type(x) ((x & SBI_PMU_EVENT_IDX_TYPE_MASK) >> 16)
> > +#define get_event_code(x) (x & SBI_PMU_EVENT_IDX_CODE_MASK)
>
> Should put () around x
>
Sure,
> > +
> > +static inline u64 pmu_get_sample_period(struct kvm_pmc *pmc)
>
> I'd rather we use kvm_pmu_ for the prefix instead of just pmu for
> this and all the other functions.
>
> Also I'd drop the inline attribute here and in other functions below to
> let the compiler completely decide what to do.
>
Done.
> > +{
> > + u64 counter_val_mask = GENMASK(pmc->cinfo.width, 0);
> > + u64 sample_period;
> > +
> > + if (!pmc->counter_val)
> > + sample_period = counter_val_mask;
> > + else
> > + sample_period = (-pmc->counter_val) & counter_val_mask;
>
> I probably don't understand this, since I see arm64/kvm doing the same
> thing, but if sample_period is the number of remaining counts a counter
> has, then I'd write it as
That's correct.
>
> sample_period = counter_val_mask - (pmc->counter_val & counter_val_mask);
>
> As it stands, the pmc->counter_val == 0 case would be the same, but
> the other case differs by 1. arm64/kvm doesn't appear to handle the
> zero case.
>
We do have to consider the last increment as well where it actually overflows.
Thus, if we want to rewrite as per your preference it should be
sample_period = counter_val_mask - (pmc->counter_val & counter_val_mask) + 1 ;
For zero cases, I got it wrong. It should be
counter_val_mask + 1
I guess If a user in a guest sets the sampling period to be 0 (even if
it is impractical to do that), that's a user's choice. KVM should just
create the perf event accordingly. I cross checked the x86
implementation. They do the same as well.
All the counters are 64 bit wide for ARM64. I guess that's why ARM64
didn't have to deal with the special 0 case.
Thanks for catching this case.
> > +
> > + return sample_period;
> > +}
> > +
> > +static u32 pmu_get_perf_event_type(unsigned long eidx)
> > +{
> > + enum sbi_pmu_event_type etype = get_event_type(eidx);
> > + u32 type;
> > +
> > + if (etype == SBI_PMU_EVENT_TYPE_HW)
> > + type = PERF_TYPE_HARDWARE;
> > + else if (etype == SBI_PMU_EVENT_TYPE_CACHE)
> > + type = PERF_TYPE_HW_CACHE;
> > + else if (etype == SBI_PMU_EVENT_TYPE_RAW || etype == SBI_PMU_EVENT_TYPE_FW)
> > + type = PERF_TYPE_RAW;
> > + else
> > + type = PERF_TYPE_MAX;
>
> nit: This might look nicer as a switch
>
> > +
> > + return type;
> > +}
> > +
> > +static inline bool pmu_is_fw_event(unsigned long eidx)
> > +{
> > +
>
> extra blank line here
>
> > + return get_event_type(eidx) == SBI_PMU_EVENT_TYPE_FW;
> > +}
> > +
> > +static void pmu_release_perf_event(struct kvm_pmc *pmc)
> > +{
> > + if (pmc->perf_event) {
> > + perf_event_disable(pmc->perf_event);
> > + perf_event_release_kernel(pmc->perf_event);
> > + pmc->perf_event = NULL;
> > + }
> > +}
> > +
> > +static u64 pmu_get_perf_event_hw_config(u32 sbi_event_code)
> > +{
> > + /* SBI PMU HW event code is offset by 1 from perf hw event codes */
> > + return (u64)sbi_event_code - 1;
>
> This is probably fine to do since we're mapping specified codes to UAPI
> codes, so it's unlikely something will change this relationship, but if we
> expose the mapping explicitly it'll give code readers a chance to see
> what's what without looking stuff up elsewhere. How about creating an
> array indexed by sbi_event_code with the mapping?
>
> enum perf_hw_id hw_event_perf_map[SBI_PMU_HW_GENERAL_MAX] = {
> [SBI_PMU_HW_CPU_CYCLES] = PERF_COUNT_HW_CPU_CYCLES,
> ...
> };
>
Done.
> > +}
> > +
> > +static u64 pmu_get_perf_event_cache_config(u32 sbi_event_code)
> > +{
> > + u64 config = U64_MAX;
> > + unsigned int cache_type, cache_op, cache_result;
> > +
> > + /* All the cache event masks lie within 0xFF. No separate masking is necesssary */
> > + cache_type = (sbi_event_code & SBI_PMU_EVENT_CACHE_ID_CODE_MASK) >> 3;
>
> It'd be nice to have a define for that 3 shift.
>
> > + cache_op = (sbi_event_code & SBI_PMU_EVENT_CACHE_OP_ID_CODE_MASK) >> 1;
>
> Also for this 1 shift.
>
Done.
> > + cache_result = sbi_event_code & SBI_PMU_EVENT_CACHE_RESULT_ID_CODE_MASK;
> > +
> > + if (cache_type >= PERF_COUNT_HW_CACHE_MAX ||
> > + cache_op >= PERF_COUNT_HW_CACHE_OP_MAX ||
> > + cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
> > + return config;
> > +
> > + config = cache_type | (cache_op << 8) | (cache_result << 16);
> > +
> > + return config;
> > +}
> > +
> > +static u64 pmu_get_perf_event_config(unsigned long eidx, uint64_t evt_data)
> > +{
> > + enum sbi_pmu_event_type etype = get_event_type(eidx);
> > + u32 ecode = get_event_code(eidx);
> > + u64 config = U64_MAX;
> > +
> > + if (etype == SBI_PMU_EVENT_TYPE_HW)
> > + config = pmu_get_perf_event_hw_config(ecode);
> > + else if (etype == SBI_PMU_EVENT_TYPE_CACHE)
> > + config = pmu_get_perf_event_cache_config(ecode);
> > + else if (etype == SBI_PMU_EVENT_TYPE_RAW)
> > + config = evt_data & RISCV_PMU_RAW_EVENT_MASK;
> > + else if ((etype == SBI_PMU_EVENT_TYPE_FW) && (ecode < SBI_PMU_FW_MAX))
> > + config = (1ULL << 63) | ecode;
>
> nit: switch?
>
> > +
> > + return config;
> > +}
> > +
> > +static int pmu_get_fixed_pmc_index(unsigned long eidx)
> > +{
> > + u32 etype = pmu_get_perf_event_type(eidx);
> > + u32 ecode = get_event_code(eidx);
> > + int ctr_idx;
> > +
> > + if (etype != SBI_PMU_EVENT_TYPE_HW)
> > + return -EINVAL;
> > +
> > + if (ecode == SBI_PMU_HW_CPU_CYCLES)
> > + ctr_idx = 0;
> > + else if (ecode == SBI_PMU_HW_INSTRUCTIONS)
> > + ctr_idx = 2;
>
> nit: Could drop the ctr_idx variable and return directly
>
> > + else
> > + return -EINVAL;
> > +
> > + return ctr_idx;
> > +}
> > +
> > +static int pmu_get_programmable_pmc_index(struct kvm_pmu *kvpmu, unsigned long eidx,
> > + unsigned long cbase, unsigned long cmask)
> > +{
> > + int ctr_idx = -1;
> > + int i, pmc_idx;
> > + int min, max;
> > +
> > + if (pmu_is_fw_event(eidx)) {
> > + /* Firmware counters are mapped 1:1 starting from num_hw_ctrs for simplicity */
> > + min = kvpmu->num_hw_ctrs;
> > + max = min + kvpmu->num_fw_ctrs;
> > + } else {
> > + /* First 3 counters are reserved for fixed counters */
> > + min = 3;
> > + max = kvpmu->num_hw_ctrs;
> > + }
> > +
> > + for_each_set_bit(i, &cmask, BITS_PER_LONG) {
> > + pmc_idx = i + cbase;
> > + if ((pmc_idx >= min && pmc_idx < max) &&
> > + !test_bit(pmc_idx, kvpmu->pmc_in_use)) {
> > + ctr_idx = pmc_idx;
> > + break;
>
> nit: Could drop the ctr_idx variable and return directly
>
> > + }
> > + }
> > +
> > + return ctr_idx;
> > +}
> > +
> > +static int pmu_get_pmc_index(struct kvm_pmu *pmu, unsigned long eidx,
> > + unsigned long cbase, unsigned long cmask)
> > +{
> > + int ret;
> > +
> > + /* Fixed counters need to be have fixed mapping as they have different width */
> > + ret = pmu_get_fixed_pmc_index(eidx);
> > + if (ret >= 0)
> > + return ret;
> > +
> > + return pmu_get_programmable_pmc_index(pmu, eidx, cbase, cmask);
> > +}
> >
> > static int pmu_ctr_read(struct kvm_vcpu *vcpu, unsigned long cidx,
> > unsigned long *out_val)
> > @@ -82,7 +235,41 @@ int kvm_riscv_vcpu_pmu_ctr_start(struct kvm_vcpu *vcpu, unsigned long ctr_base,
> > unsigned long ctr_mask, unsigned long flag, uint64_t ival,
> > struct kvm_vcpu_sbi_ext_data *edata)
> > {
> > - /* TODO */
> > + struct kvm_pmu *kvpmu = vcpu_to_pmu(vcpu);
> > + int i, num_ctrs, pmc_index, sbiret = 0;
> > + struct kvm_pmc *pmc;
> > +
> > + num_ctrs = kvpmu->num_fw_ctrs + kvpmu->num_hw_ctrs;
>
> We can put kvm_pmu_num_counters(kvpmu) in its one use below and
> drop num_ctrs.
>
> > + if (ctr_base + __fls(ctr_mask) >= num_ctrs) {
>
> __fls is undefined when ctr_mask is zero, so we should check it first,
> unless the caller of this function is required to check it.
>
> (Same two comments for the functions below that have the same check.)
>
Moved these checks to a common counter validate function that can be called
from start/stop/config.
> > + sbiret = SBI_ERR_INVALID_PARAM;
> > + goto out;
> > + }
> > +
> > + /* Start the counters that have been configured and requested by the guest */
> > + for_each_set_bit(i, &ctr_mask, RISCV_MAX_COUNTERS) {
> > + pmc_index = i + ctr_base;
> > + if (!test_bit(pmc_index, kvpmu->pmc_in_use))
> > + continue;
> > + pmc = &kvpmu->pmc[pmc_index];
> > + if (flag & SBI_PMU_START_FLAG_SET_INIT_VALUE)
> > + pmc->counter_val = ival;
> > + if (pmc->perf_event) {
> > + if (unlikely(pmc->started)) {
> > + sbiret = SBI_ERR_ALREADY_STARTED;
> > + continue;
> > + }
> > + perf_event_period(pmc->perf_event, pmu_get_sample_period(pmc));
> > + perf_event_enable(pmc->perf_event);
> > + pmc->started = true;
> > + } else {
> > + kvm_debug("Can not start counter due to invalid confiugartion\n");
> ^ Cannot ^ configuration
>
> > + sbiret = SBI_ERR_INVALID_PARAM;
> > + }
> > + }
>
> Possibly a spec oversight is that we continue to try and start counters,
> even when we've seen errors. The problem with implementing that is that
> if we have both errors we only return the last one. I.e. one counter
> was already started and another counter resulted in invalid-param, we
> only return invalid-param. We also don't say anything about the number
> of failures / successes. I think we should bail on the first error and
> even stop counters that we started. Callers can then try again after
> correcting their input without potentially getting already-started errors.
> We'd need to change the spec to do that though.
>
The idea was to provide a best effort service for batching use cases.
As long as the caller has a valid counter,
the SBI implementation should try to start that counter. For the
invalid counters, it does notify
the caller that one or more counters from the requested counter is invalid.
It's up to the caller to decide whether it actually cares about the error.
E.g. The caller may just want to stop all the counters without
tracking which counters are actually configured/started.
As per the spec:
SBI_ERR_INVALID_PARAM : set of counters has at least one invalid counter.
SBI_ERR_ALREADY_STARTED : set of counters includes at least one
counter which is already started.
> > +
> > +out:
> > + edata->err_val = sbiret;
> > +
> > return 0;
> > }
> >
> > @@ -90,16 +277,142 @@ int kvm_riscv_vcpu_pmu_ctr_stop(struct kvm_vcpu *vcpu, unsigned long ctr_base,
> > unsigned long ctr_mask, unsigned long flag,
> > struct kvm_vcpu_sbi_ext_data *edata)
> > {
> > - /* TODO */
> > + struct kvm_pmu *kvpmu = vcpu_to_pmu(vcpu);
> > + int i, num_ctrs, pmc_index, sbiret = 0;
> > + u64 enabled, running;
> > + struct kvm_pmc *pmc;
> > +
> > + num_ctrs = kvpmu->num_fw_ctrs + kvpmu->num_hw_ctrs;
> > + if ((ctr_base + __fls(ctr_mask)) >= num_ctrs) {
>
> nit: Can drop ()
>
> > + sbiret = SBI_ERR_INVALID_PARAM;
> > + goto out;
> > + }
> > +
> > + /* Stop the counters that have been configured and requested by the guest */
> > + for_each_set_bit(i, &ctr_mask, RISCV_MAX_COUNTERS) {
> > + pmc_index = i + ctr_base;
> > + if (!test_bit(pmc_index, kvpmu->pmc_in_use))
> > + continue;
> > + pmc = &kvpmu->pmc[pmc_index];
> > + if (pmc->perf_event) {
> > + if (pmc->started) {
> > + /* Stop counting the counter */
> > + perf_event_disable(pmc->perf_event);
> > + pmc->started = false;
> > + } else
> > + sbiret = SBI_ERR_ALREADY_STOPPED;
> > +
> > + if (flag & SBI_PMU_STOP_FLAG_RESET) {
> > + /* Relase the counter if this is a reset request */
> > + pmc->counter_val += perf_event_read_value(pmc->perf_event,
> > + &enabled, &running);
> > + pmu_release_perf_event(pmc);
> > + clear_bit(pmc_index, kvpmu->pmc_in_use);
> > + }
> > + } else {
> > + kvm_debug("Can not stop counter due to invalid confiugartion\n");
> ^Cannot ^ configuration
>
> > + sbiret = SBI_ERR_INVALID_PARAM;
> > + }
> > + }
>
> Same comment about the multiple errors problem.
>
> > +
> > +out:
> > + edata->err_val = sbiret;
> > +
> > return 0;
> > }
> >
> > int kvm_riscv_vcpu_pmu_ctr_cfg_match(struct kvm_vcpu *vcpu, unsigned long ctr_base,
> > unsigned long ctr_mask, unsigned long flag,
> > - unsigned long eidx, uint64_t edata,
> > - struct kvm_vcpu_sbi_ext_data *extdata)
> > + unsigned long eidx, uint64_t evt_data,
> > + struct kvm_vcpu_sbi_ext_data *ext_data)
>
> This should be part of the skeleton patch.
>
> > {
> > - /* TODO */
> > + struct kvm_pmu *kvpmu = vcpu_to_pmu(vcpu);
> > + struct perf_event *event;
> > + struct perf_event_attr attr;
> > + int num_ctrs, ctr_idx;
> > + u32 etype = pmu_get_perf_event_type(eidx);
> > + u64 config;
> > + struct kvm_pmc *pmc;
> > + int sbiret = 0;
> > +
> > +
> > + num_ctrs = kvpmu->num_fw_ctrs + kvpmu->num_hw_ctrs;
> > + if (etype == PERF_TYPE_MAX || (ctr_base + __fls(ctr_mask) >= num_ctrs)) {
> > + sbiret = SBI_ERR_INVALID_PARAM;
> > + goto out;
> > + }
> > +
> > + if (pmu_is_fw_event(eidx)) {
> > + sbiret = SBI_ERR_NOT_SUPPORTED;
> > + goto out;
> > + }
> > +
> > + /*
> > + * SKIP_MATCH flag indicates the caller is aware of the assigned counter
> > + * for this event. Just do a sanity check if it already marked used.
> > + */
> > + if (flag & SBI_PMU_CFG_FLAG_SKIP_MATCH) {
> > + if (!test_bit(ctr_base, kvpmu->pmc_in_use)) {
> > + sbiret = SBI_ERR_FAILURE;
> > + goto out;
>
> I see this is the same way OpenSBI implements this, but I don't really
> understand it. The spec says
>
> """
> NOTE: When SBI_PMU_CFG_FLAG_SKIP_MATCH is set in config_flags, the SBI
> implementation will unconditionally select the first counter from the set
> of counters specified by the counter_idx_base and counter_idx_mask.
> """
>
> which doesn't say anything about the caller just wanting to confirm the
> counter is in use. Indeed, the spec says this function is for
>
> """
> Find and configure a counter from a set of counters which is not started
> (or enabled) and can monitor the specified event.
> """
>
> which would imply errors should returned anytime we match something
> already started, rather than the opposite.
>
If the caller requested for a specific counter and that is already
configured, SBI implementation
can not assign another counter. In that case, it has to return an error only.
> Also, I think we should be using ctr_base + first-set-bit(ctr_mask),
> because the spec says to look at both the base and the mask, and take
> the first counter.
>
Ahh yes. Thanks for catching. Fixed.
> Finally, the spec doesn't have SBI_ERR_FAILURE listed as a possible
> error.
>
It should be SBI_ERR_INVALID_PARAM. Fixed.
> > + }
> > + ctr_idx = ctr_base;
> > + goto match_done;
>
> nit: We don't need the match_done label and goto. We can just use
> an if-else.
>
> > + }
> > +
> > + ctr_idx = pmu_get_pmc_index(kvpmu, eidx, ctr_base, ctr_mask);
> > + if (ctr_idx < 0) {
> > + sbiret = SBI_ERR_NOT_SUPPORTED;
> > + goto out;
> > + }
> > +
> > +match_done:
> > + pmc = &kvpmu->pmc[ctr_idx];
> > + pmu_release_perf_event(pmc);
> > + pmc->idx = ctr_idx;
> > +
> > + config = pmu_get_perf_event_config(eidx, evt_data);
> > + memset(&attr, 0, sizeof(struct perf_event_attr));
>
> At the top of the function we can use
>
> struct perf_event_attr attr = {
> .type = etype,
> .size = sizeof(struct perf_event_attr),
>
> /* anything else we know at the top */
>
> };
>
> instead of the memset and some of the assignments here.
>
Done.
> > + attr.type = etype;
> > + attr.size = sizeof(attr);
> > + attr.pinned = true;
> > +
> > + /*
> > + * It should never reach here if the platform doesn't support sscofpmf extensio
> ^ the ^ extension
>
> > + * as mode filtering won't work without it.
> > + */
> > + attr.exclude_host = true;
> > + attr.exclude_hv = true;
> > + attr.exclude_user = !!(flag & SBI_PMU_CFG_FLAG_SET_UINH);
> > + attr.exclude_kernel = !!(flag & SBI_PMU_CFG_FLAG_SET_SINH);
> > + attr.config = config;
> > + attr.config1 = RISCV_KVM_PMU_CONFIG1_GUEST_EVENTS;
> > + if (flag & SBI_PMU_CFG_FLAG_CLEAR_VALUE) {
> > + //TODO: Do we really want to clear the value in hardware counter
> > + pmc->counter_val = 0;
> > + }
> > +
> > + /*
> > + * Set the default sample_period for now. The guest specified value
> > + * will be updated in the start call.
> > + */
> > + attr.sample_period = pmu_get_sample_period(pmc);
> > +
> > + event = perf_event_create_kernel_counter(&attr, -1, current, NULL, pmc);
> > + if (IS_ERR(event)) {
> > + pr_err("kvm pmu event creation failed event %pe for eidx %lx\n", event, eidx);
> > + return -EOPNOTSUPP;
>
> event is an error, so we shouldn't call it an event in the error message.
> How about
>
> pr_err("kvm pmu event creation failed for eidx %lx: %ld\n", eidx, PTR_ERR(event));
>
> and then PTR_ERR(event) intead of -EOPNOTSUPP.
>
Done.
> > + }
> > +
> > + set_bit(ctr_idx, kvpmu->pmc_in_use);
> > + pmc->perf_event = event;
> > + if (flag & SBI_PMU_CFG_FLAG_AUTO_START)
> > + perf_event_enable(pmc->perf_event);
> > +
> > + ext_data->out_val = ctr_idx;
> > +out:
> > + ext_data->err_val = sbiret;
> > +
> > return 0;
> > }
> >
> > @@ -119,6 +432,7 @@ int kvm_riscv_vcpu_pmu_init(struct kvm_vcpu *vcpu)
> > {
> > int i = 0, num_fw_ctrs, ret, num_hw_ctrs = 0, hpm_width = 0;
> > struct kvm_pmu *kvpmu = vcpu_to_pmu(vcpu);
> > + struct kvm_pmc *pmc;
> >
> > ret = riscv_pmu_get_hpm_info(&hpm_width, &num_hw_ctrs);
> > if (ret < 0)
> > @@ -134,6 +448,7 @@ int kvm_riscv_vcpu_pmu_init(struct kvm_vcpu *vcpu)
> > else
> > num_fw_ctrs = RISCV_KVM_MAX_FW_CTRS;
> >
> > + bitmap_zero(kvpmu->pmc_in_use, RISCV_MAX_COUNTERS);
>
> Could move this bitmap clearing to deinit as it should be clear the
> first time already since vcpus are allocated with __GFP_ZERO.
>
> > kvpmu->num_hw_ctrs = num_hw_ctrs;
> > kvpmu->num_fw_ctrs = num_fw_ctrs;
> > /*
> > @@ -146,24 +461,26 @@ int kvm_riscv_vcpu_pmu_init(struct kvm_vcpu *vcpu)
> > /* TIME CSR shouldn't be read from perf interface */
> > if (i == 1)
> > continue;
> > - kvpmu->pmc[i].idx = i;
> > + pmc = &kvpmu->pmc[i];
> > + pmc->idx = i;
> > + pmc->counter_val = 0;
>
> Also could be moved to deinit.
>
> > if (i < kvpmu->num_hw_ctrs) {
> > kvpmu->pmc[i].cinfo.type = SBI_PMU_CTR_TYPE_HW;
> > if (i < 3)
> > /* CY, IR counters */
> > - kvpmu->pmc[i].cinfo.width = 63;
> > + pmc->cinfo.width = 63;
> > else
> > - kvpmu->pmc[i].cinfo.width = hpm_width;
> > + pmc->cinfo.width = hpm_width;
> > /*
> > * The CSR number doesn't have any relation with the logical
> > * hardware counters. The CSR numbers are encoded sequentially
> > * to avoid maintaining a map between the virtual counter
> > * and CSR number.
> > */
> > - kvpmu->pmc[i].cinfo.csr = CSR_CYCLE + i;
> > + pmc->cinfo.csr = CSR_CYCLE + i;
> > } else {
> > - kvpmu->pmc[i].cinfo.type = SBI_PMU_CTR_TYPE_FW;
> > - kvpmu->pmc[i].cinfo.width = BITS_PER_LONG - 1;
> > + pmc->cinfo.type = SBI_PMU_CTR_TYPE_FW;
> > + pmc->cinfo.width = BITS_PER_LONG - 1;
>
> Almost all of these changes can be avoided by using the pmc pointer in the
> skeleton patch from the start.
>
Fixed.
> > }
> > }
> >
> > @@ -172,13 +489,22 @@ int kvm_riscv_vcpu_pmu_init(struct kvm_vcpu *vcpu)
> > return 0;
> > }
> >
> > -void kvm_riscv_vcpu_pmu_reset(struct kvm_vcpu *vcpu)
> > +void kvm_riscv_vcpu_pmu_deinit(struct kvm_vcpu *vcpu)
> > {
> > - /* TODO */
> > + struct kvm_pmu *kvpmu = vcpu_to_pmu(vcpu);
> > + struct kvm_pmc *pmc;
> > + int i;
> > +
> > + if (!kvpmu)
> > + return;
> > +
> > + for_each_set_bit(i, kvpmu->pmc_in_use, RISCV_MAX_COUNTERS) {
> > + pmc = &kvpmu->pmc[i];
> > + pmu_release_perf_event(pmc);
> > + }
> > }
> >
> > -void kvm_riscv_vcpu_pmu_deinit(struct kvm_vcpu *vcpu)
> > +void kvm_riscv_vcpu_pmu_reset(struct kvm_vcpu *vcpu)
> > {
> > - /* TODO */
> > + kvm_riscv_vcpu_pmu_deinit(vcpu);
>
> The skeleton patch could put deinit and reset in the right order to avoid
> this change.
>
Done. I have addressed all the nit comments as well.
Thanks for the detailed review.
> > }
> > -
> > --
> > 2.25.1
> >
>
> Thanks,
> drew
--
Regards,
Atish
