[PATCH v2 7/8] KVM: selftests: aarch64: vPMU register test for implemented counters

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a new test case to the vpmu_counter_access test to check if PMU
registers or their bits for implemented counters on the vCPU are
readable/writable as expected, and can be programmed to count events.

Signed-off-by: Reiji Watanabe <reijiw@xxxxxxxxxx>
---
 .../kvm/aarch64/vpmu_counter_access.c         | 347 +++++++++++++++++-
 1 file changed, 344 insertions(+), 3 deletions(-)

diff --git a/tools/testing/selftests/kvm/aarch64/vpmu_counter_access.c b/tools/testing/selftests/kvm/aarch64/vpmu_counter_access.c
index 704a2500b7e1..54b69c76c824 100644
--- a/tools/testing/selftests/kvm/aarch64/vpmu_counter_access.c
+++ b/tools/testing/selftests/kvm/aarch64/vpmu_counter_access.c
@@ -5,7 +5,8 @@
  * Copyright (c) 2022 Google LLC.
  *
  * This test checks if the guest can see the same number of the PMU event
- * counters (PMCR_EL1.N) that userspace sets.
+ * counters (PMCR_EL1.N) that userspace sets, and if the guest can access
+ * those counters.
  * This test runs only when KVM_CAP_ARM_PMU_V3 is supported on the host.
  */
 #include <kvm_util.h>
@@ -18,19 +19,350 @@
 /* The max number of the PMU event counters (excluding the cycle counter) */
 #define ARMV8_PMU_MAX_GENERAL_COUNTERS	(ARMV8_PMU_MAX_COUNTERS - 1)
 
+/*
+ * The macros and functions below for reading/writing PMEVT{CNTR,TYPER}<n>_EL0
+ * were basically copied from arch/arm64/kernel/perf_event.c.
+ */
+#define PMEVN_CASE(n, case_macro) \
+	case n: case_macro(n); break
+
+#define PMEVN_SWITCH(x, case_macro)				\
+	do {							\
+		switch (x) {					\
+		PMEVN_CASE(0,  case_macro);			\
+		PMEVN_CASE(1,  case_macro);			\
+		PMEVN_CASE(2,  case_macro);			\
+		PMEVN_CASE(3,  case_macro);			\
+		PMEVN_CASE(4,  case_macro);			\
+		PMEVN_CASE(5,  case_macro);			\
+		PMEVN_CASE(6,  case_macro);			\
+		PMEVN_CASE(7,  case_macro);			\
+		PMEVN_CASE(8,  case_macro);			\
+		PMEVN_CASE(9,  case_macro);			\
+		PMEVN_CASE(10, case_macro);			\
+		PMEVN_CASE(11, case_macro);			\
+		PMEVN_CASE(12, case_macro);			\
+		PMEVN_CASE(13, case_macro);			\
+		PMEVN_CASE(14, case_macro);			\
+		PMEVN_CASE(15, case_macro);			\
+		PMEVN_CASE(16, case_macro);			\
+		PMEVN_CASE(17, case_macro);			\
+		PMEVN_CASE(18, case_macro);			\
+		PMEVN_CASE(19, case_macro);			\
+		PMEVN_CASE(20, case_macro);			\
+		PMEVN_CASE(21, case_macro);			\
+		PMEVN_CASE(22, case_macro);			\
+		PMEVN_CASE(23, case_macro);			\
+		PMEVN_CASE(24, case_macro);			\
+		PMEVN_CASE(25, case_macro);			\
+		PMEVN_CASE(26, case_macro);			\
+		PMEVN_CASE(27, case_macro);			\
+		PMEVN_CASE(28, case_macro);			\
+		PMEVN_CASE(29, case_macro);			\
+		PMEVN_CASE(30, case_macro);			\
+		default:					\
+			GUEST_ASSERT_1(0, x);			\
+		}						\
+	} while (0)
+
+#define RETURN_READ_PMEVCNTRN(n) \
+	return read_sysreg(pmevcntr##n##_el0)
+static unsigned long read_pmevcntrn(int n)
+{
+	PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN);
+	return 0;
+}
+
+#define WRITE_PMEVCNTRN(n) \
+	write_sysreg(val, pmevcntr##n##_el0)
+static void write_pmevcntrn(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVCNTRN);
+	isb();
+}
+
+#define READ_PMEVTYPERN(n) \
+	return read_sysreg(pmevtyper##n##_el0)
+static unsigned long read_pmevtypern(int n)
+{
+	PMEVN_SWITCH(n, READ_PMEVTYPERN);
+	return 0;
+}
+
+#define WRITE_PMEVTYPERN(n) \
+	write_sysreg(val, pmevtyper##n##_el0)
+static void write_pmevtypern(int n, unsigned long val)
+{
+	PMEVN_SWITCH(n, WRITE_PMEVTYPERN);
+	isb();
+}
+
+/* Read PMEVTCNTR<n>_EL0 through PMXEVCNTR_EL0 */
+static inline unsigned long read_sel_evcntr(int sel)
+{
+	write_sysreg(sel, pmselr_el0);
+	isb();
+	return read_sysreg(pmxevcntr_el0);
+}
+
+/* Write PMEVTCNTR<n>_EL0 through PMXEVCNTR_EL0 */
+static inline void write_sel_evcntr(int sel, unsigned long val)
+{
+	write_sysreg(sel, pmselr_el0);
+	isb();
+	write_sysreg(val, pmxevcntr_el0);
+	isb();
+}
+
+/* Read PMEVTTYPER<n>_EL0 through PMXEVTYPER_EL0 */
+static inline unsigned long read_sel_evtyper(int sel)
+{
+	write_sysreg(sel, pmselr_el0);
+	isb();
+	return read_sysreg(pmxevtyper_el0);
+}
+
+/* Write PMEVTTYPER<n>_EL0 through PMXEVTYPER_EL0 */
+static inline void write_sel_evtyper(int sel, unsigned long val)
+{
+	write_sysreg(sel, pmselr_el0);
+	isb();
+	write_sysreg(val, pmxevtyper_el0);
+	isb();
+}
+
+static inline void enable_counter(int idx)
+{
+	uint64_t v = read_sysreg(pmcntenset_el0);
+
+	write_sysreg(BIT(idx) | v, pmcntenset_el0);
+	isb();
+}
+
+static inline void disable_counter(int idx)
+{
+	uint64_t v = read_sysreg(pmcntenset_el0);
+
+	write_sysreg(BIT(idx) | v, pmcntenclr_el0);
+	isb();
+}
+
+/*
+ * The pmc_accessor structure has pointers to PMEVT{CNTR,TYPER}<n>_EL0
+ * accessors that test cases will use. Each of the accessors will
+ * either directly reads/writes PMEVT{CNTR,TYPER}<n>_EL0
+ * (i.e. {read,write}_pmev{cnt,type}rn()), or reads/writes them through
+ * PMXEV{CNTR,TYPER}_EL0 (i.e. {read,write}_sel_ev{cnt,type}r()).
+ *
+ * This is used to test that combinations of those accessors provide
+ * the consistent behavior.
+ */
+struct pmc_accessor {
+	/* A function to be used to read PMEVTCNTR<n>_EL0 */
+	unsigned long	(*read_cntr)(int idx);
+	/* A function to be used to write PMEVTCNTR<n>_EL0 */
+	void		(*write_cntr)(int idx, unsigned long val);
+	/* A function to be used to read PMEVTTYPER<n>_EL0 */
+	unsigned long	(*read_typer)(int idx);
+	/* A function to be used write PMEVTTYPER<n>_EL0 */
+	void		(*write_typer)(int idx, unsigned long val);
+};
+
+struct pmc_accessor pmc_accessors[] = {
+	/* test with all direct accesses */
+	{ read_pmevcntrn, write_pmevcntrn, read_pmevtypern, write_pmevtypern },
+	/* test with all indirect accesses */
+	{ read_sel_evcntr, write_sel_evcntr, read_sel_evtyper, write_sel_evtyper },
+	/* read with direct accesses, and write with indirect accesses */
+	{ read_pmevcntrn, write_sel_evcntr, read_pmevtypern, write_sel_evtyper },
+	/* read with indirect accesses, and write with direct accesses */
+	{ read_sel_evcntr, write_pmevcntrn, read_sel_evtyper, write_pmevtypern },
+};
+
+static void pmu_disable_reset(void)
+{
+	uint64_t pmcr = read_sysreg(pmcr_el0);
+
+	/* Reset all counters, disabling them */
+	pmcr &= ~ARMV8_PMU_PMCR_E;
+	write_sysreg(pmcr | ARMV8_PMU_PMCR_P, pmcr_el0);
+	isb();
+}
+
+static void pmu_enable(void)
+{
+	uint64_t pmcr = read_sysreg(pmcr_el0);
+
+	/* Reset all counters, disabling them */
+	pmcr |= ARMV8_PMU_PMCR_E;
+	write_sysreg(pmcr | ARMV8_PMU_PMCR_P, pmcr_el0);
+	isb();
+}
+
+static bool pmu_event_is_supported(uint64_t event)
+{
+	GUEST_ASSERT_1(event < 64, event);
+	return (read_sysreg(pmceid0_el0) & BIT(event));
+}
+
 static uint64_t pmcr_extract_n(uint64_t pmcr_val)
 {
 	return (pmcr_val >> ARMV8_PMU_PMCR_N_SHIFT) & ARMV8_PMU_PMCR_N_MASK;
 }
 
+#define GUEST_ASSERT_BITMAP_REG(regname, mask, set_expected)		\
+{									\
+	uint64_t _tval = read_sysreg(regname);				\
+									\
+	if (set_expected)						\
+		GUEST_ASSERT_3((_tval & mask), _tval, mask, set_expected); \
+	else								   \
+		GUEST_ASSERT_3(!(_tval & mask), _tval, mask, set_expected);\
+}
+
+/*
+ * Check if @mask bits in {PMCNTEN,PMOVS}{SET,CLR} registers
+ * are set or cleared as specified in @set_expected.
+ */
+static void check_bitmap_pmu_regs(uint64_t mask, bool set_expected)
+{
+	GUEST_ASSERT_BITMAP_REG(pmcntenset_el0, mask, set_expected);
+	GUEST_ASSERT_BITMAP_REG(pmcntenclr_el0, mask, set_expected);
+	GUEST_ASSERT_BITMAP_REG(pmovsset_el0, mask, set_expected);
+	GUEST_ASSERT_BITMAP_REG(pmovsclr_el0, mask, set_expected);
+}
+
+/*
+ * Check if the bit in {PMCNTEN,PMOVS}{SET,CLR} registers corresponding
+ * to the specified counter (@pmc_idx) can be read/written as expected.
+ * When @set_op is true, it tries to set the bit for the counter in
+ * those registers by writing the SET registers (the bit won't be set
+ * if the counter is not implemented though).
+ * Otherwise, it tries to clear the bits in the registers by writing
+ * the CLR registers.
+ * Then, it checks if the values indicated in the registers are as expected.
+ */
+static void test_bitmap_pmu_regs(int pmc_idx, bool set_op)
+{
+	uint64_t pmcr_n, test_bit = BIT(pmc_idx);
+	bool set_expected = false;
+
+	if (set_op) {
+		write_sysreg(test_bit, pmcntenset_el0);
+		write_sysreg(test_bit, pmovsset_el0);
+
+		/* The bit will be set only if the counter is implemented */
+		pmcr_n = pmcr_extract_n(read_sysreg(pmcr_el0));
+		set_expected = (pmc_idx < pmcr_n) ? true : false;
+	} else {
+		write_sysreg(test_bit, pmcntenclr_el0);
+		write_sysreg(test_bit, pmovsclr_el0);
+	}
+	check_bitmap_pmu_regs(test_bit, set_expected);
+}
+
+/*
+ * Tests for reading/writing registers for the (implemented) event counter
+ * specified by @pmc_idx.
+ */
+static void test_access_pmc_regs(struct pmc_accessor *acc, int pmc_idx)
+{
+	uint64_t write_data, read_data, read_data_prev, test_bit;
+
+	/* Disable all PMCs and reset all PMCs to zero. */
+	pmu_disable_reset();
+
+
+	/*
+	 * Tests for reading/writing {PMCNTEN,PMOVS}{SET,CLR}_EL1.
+	 */
+
+	test_bit = 1ul << pmc_idx;
+	/* Make sure that the bit in those registers are set to 0 */
+	test_bitmap_pmu_regs(test_bit, false);
+	/* Test if setting the bit in those registers works */
+	test_bitmap_pmu_regs(test_bit, true);
+	/* Test if clearing the bit in those registers works */
+	test_bitmap_pmu_regs(test_bit, false);
+
+
+	/*
+	 * Tests for reading/writing the event type register.
+	 */
+
+	read_data = acc->read_typer(pmc_idx);
+	/*
+	 * Set the event type register to an arbitrary value just for testing
+	 * of reading/writing the register.
+	 * ArmARM says that for the event from 0x0000 to 0x003F,
+	 * the value indicated in the PMEVTYPER<n>_EL0.evtCount field is
+	 * the value written to the field even when the specified event
+	 * is not supported.
+	 */
+	write_data = (ARMV8_PMU_EXCLUDE_EL1 | ARMV8_PMUV3_PERFCTR_INST_RETIRED);
+	acc->write_typer(pmc_idx, write_data);
+	read_data = acc->read_typer(pmc_idx);
+	GUEST_ASSERT_4(read_data == write_data,
+		       pmc_idx, acc, read_data, write_data);
+
+
+	/*
+	 * Tests for reading/writing the event count register.
+	 */
+
+	read_data = acc->read_cntr(pmc_idx);
+
+	/* The count value must be 0, as it is not used after the reset */
+	GUEST_ASSERT_3(read_data == 0, pmc_idx, acc, read_data);
+
+	write_data = read_data + pmc_idx + 0x12345;
+	acc->write_cntr(pmc_idx, write_data);
+	read_data = acc->read_cntr(pmc_idx);
+	GUEST_ASSERT_4(read_data == write_data,
+		       pmc_idx, acc, read_data, write_data);
+
+
+	/* The following test requires the INST_RETIRED event support. */
+	if (!pmu_event_is_supported(ARMV8_PMUV3_PERFCTR_INST_RETIRED))
+		return;
+
+	pmu_enable();
+	acc->write_typer(pmc_idx, ARMV8_PMUV3_PERFCTR_INST_RETIRED);
+
+	/*
+	 * Make sure that the counter doesn't count the INST_RETIRED
+	 * event when disabled, and the counter counts the event when enabled.
+	 */
+	disable_counter(pmc_idx);
+	read_data_prev = acc->read_cntr(pmc_idx);
+	read_data = acc->read_cntr(pmc_idx);
+	GUEST_ASSERT_4(read_data == read_data_prev,
+		       pmc_idx, acc, read_data, read_data_prev);
+
+	enable_counter(pmc_idx);
+	read_data = acc->read_cntr(pmc_idx);
+
+	/*
+	 * The counter should be increased by at least 1, as there is at
+	 * least one instruction between enabling the counter and reading
+	 * the counter (the test assumes that all event counters are not
+	 * being used by the host's higher priority events).
+	 */
+	GUEST_ASSERT_4(read_data > read_data_prev,
+		       pmc_idx, acc, read_data, read_data_prev);
+}
+
 /*
  * The guest is configured with PMUv3 with @expected_pmcr_n number of
  * event counters.
- * Check if @expected_pmcr_n is consistent with PMCR_EL0.N.
+ * Check if @expected_pmcr_n is consistent with PMCR_EL0.N, and
+ * if reading/writing PMU registers for implemented counters can work
+ * as expected.
  */
 static void guest_code(uint64_t expected_pmcr_n)
 {
 	uint64_t pmcr, pmcr_n;
+	int i, pmc;
 
 	GUEST_ASSERT(expected_pmcr_n <= ARMV8_PMU_MAX_GENERAL_COUNTERS);
 
@@ -40,6 +372,15 @@ static void guest_code(uint64_t expected_pmcr_n)
 	/* Make sure that PMCR_EL0.N indicates the value userspace set */
 	GUEST_ASSERT_2(pmcr_n == expected_pmcr_n, pmcr_n, expected_pmcr_n);
 
+	/*
+	 * Tests for reading/writing PMU registers for implemented counters.
+	 * Use each combination of PMEVT{CNTR,TYPER}<n>_EL0 accessor functions.
+	 */
+	for (i = 0; i < ARRAY_SIZE(pmc_accessors); i++) {
+		for (pmc = 0; pmc < pmcr_n; pmc++)
+			test_access_pmc_regs(&pmc_accessors[i], pmc);
+	}
+
 	GUEST_DONE();
 }
 
@@ -96,7 +437,7 @@ static void run_vcpu(struct kvm_vcpu *vcpu, uint64_t pmcr_n)
 	vcpu_run(vcpu);
 	switch (get_ucall(vcpu, &uc)) {
 	case UCALL_ABORT:
-		REPORT_GUEST_ASSERT_2(uc, "values:%#lx %#lx");
+		REPORT_GUEST_ASSERT_4(uc, "values:%#lx %#lx %#lx %#lx");
 		break;
 	case UCALL_DONE:
 		break;
-- 
2.39.0.314.g84b9a713c41-goog




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux