From: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
When running in virtual EL2 mode, we actually run the hardware in EL1
and therefore have to use the EL1 registers to ensure correct operation.
By setting the HCR.TVM and HCR.TVRM we ensure that the virtual EL2 mode
doesn't shoot itself in the foot when setting up what it believes to be
a different mode's system register state (for example when preparing to
switch to a VM).
We can leverage the existing sysregs infrastructure to support trapped
accesses to these registers.
Reviewed-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>
Reviewed-by: Alexandru Elisei <alexandru.elisei@xxxxxxx>
Signed-off-by: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
Signed-off-by: Marc Zyngier <maz@xxxxxxxxxx>
---
arch/arm64/kvm/hyp/include/hyp/switch.h | 4 +---
arch/arm64/kvm/hyp/nvhe/switch.c | 2 +-
arch/arm64/kvm/hyp/vhe/switch.c | 7 ++++++-
arch/arm64/kvm/sys_regs.c | 19 ++++++++++++++++---
4 files changed, 24 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h
index 07d37ff88a3f..e0bcaf000251 100644
--- a/arch/arm64/kvm/hyp/include/hyp/switch.h
+++ b/arch/arm64/kvm/hyp/include/hyp/switch.h
@@ -118,10 +118,8 @@ static inline void __deactivate_traps_common(struct kvm_vcpu *vcpu)
}
}
-static inline void ___activate_traps(struct kvm_vcpu *vcpu)
+static inline void ___activate_traps(struct kvm_vcpu *vcpu, u64 hcr)
{
- u64 hcr = vcpu->arch.hcr_el2;
-
if (cpus_have_final_cap(ARM64_WORKAROUND_CAVIUM_TX2_219_TVM))
hcr |= HCR_TVM;
diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c
index c2cb46ca4fb6..efac8fbe0b20 100644
--- a/arch/arm64/kvm/hyp/nvhe/switch.c
+++ b/arch/arm64/kvm/hyp/nvhe/switch.c
@@ -40,7 +40,7 @@ static void __activate_traps(struct kvm_vcpu *vcpu)
{
u64 val;
- ___activate_traps(vcpu);
+ ___activate_traps(vcpu, vcpu->arch.hcr_el2);
__activate_traps_common(vcpu);
val = vcpu->arch.cptr_el2;
diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c
index cd3f3117bf16..c8da8d350453 100644
--- a/arch/arm64/kvm/hyp/vhe/switch.c
+++ b/arch/arm64/kvm/hyp/vhe/switch.c
@@ -35,9 +35,14 @@ DEFINE_PER_CPU(unsigned long, kvm_hyp_vector);
static void __activate_traps(struct kvm_vcpu *vcpu)
{
+ u64 hcr = vcpu->arch.hcr_el2;
u64 val;
- ___activate_traps(vcpu);
+ /* Trap VM sysreg accesses if an EL2 guest is not using VHE. */
+ if (vcpu_is_el2(vcpu) && !vcpu_el2_e2h_is_set(vcpu))
+ hcr |= HCR_TVM | HCR_TRVM;
+
+ ___activate_traps(vcpu, hcr);
val = read_sysreg(cpacr_el1);
val |= CPACR_ELx_TTA;
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 0d1b02701524..1558bf6d9a68 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -318,8 +318,15 @@ static void get_access_mask(const struct sys_reg_desc *r, u64 *mask, u64 *shift)
/*
* Generic accessor for VM registers. Only called as long as HCR_TVM
- * is set. If the guest enables the MMU, we stop trapping the VM
- * sys_regs and leave it in complete control of the caches.
+ * is set.
+ *
+ * This is set in two cases: either (1) we're running at vEL2, or (2)
+ * we're running at EL1 and the guest has its MMU off.
+ *
+ * (1) TVM/TRVM is set, as we need to virtualise some of the VM
+ * registers for the guest hypervisor
+ * (2) Once the guest enables the MMU, we stop trapping the VM sys_regs
+ * and leave it in complete control of the caches.
*/
static bool access_vm_reg(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
@@ -328,7 +335,13 @@ static bool access_vm_reg(struct kvm_vcpu *vcpu,
bool was_enabled = vcpu_has_cache_enabled(vcpu);
u64 val, mask, shift;
- BUG_ON(!p->is_write);
+ /* We don't expect TRVM on the host */
+ BUG_ON(!vcpu_is_el2(vcpu) && !p->is_write);
+
+ if (!p->is_write) {
+ p->regval = vcpu_read_sys_reg(vcpu, r->reg);
+ return true;
+ }
get_access_mask(r, &mask, &shift);
--
2.34.1
