Re: [PATCH v5 01/10] KVM: s390: Extend MEM_OP ioctl by storage key checked cmpxchg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2023-01-11 at 08:59 +0100, Thomas Huth wrote:
> On 10/01/2023 21.26, Janis Schoetterl-Glausch wrote:
> > User space can use the MEM_OP ioctl to make storage key checked reads
> > and writes to the guest, however, it has no way of performing atomic,
> > key checked, accesses to the guest.
> > Extend the MEM_OP ioctl in order to allow for this, by adding a cmpxchg
> > mode. For now, support this mode for absolute accesses only.
> > 
> > This mode can be use, for example, to set the device-state-change
> > indicator and the adapter-local-summary indicator atomically.
> > 
> > Signed-off-by: Janis Schoetterl-Glausch <scgl@xxxxxxxxxxxxx>
> > ---
> >   include/uapi/linux/kvm.h |   7 +++
> >   arch/s390/kvm/gaccess.h  |   3 ++
> >   arch/s390/kvm/gaccess.c  | 102 +++++++++++++++++++++++++++++++++++++++
> >   arch/s390/kvm/kvm-s390.c |  41 +++++++++++++++-
> >   4 files changed, 151 insertions(+), 2 deletions(-)
> > 
[...]

> > +/**
> > + * cmpxchg_guest_abs_with_key() - Perform cmpxchg on guest absolute address.
> > + * @kvm: Virtual machine instance.
> > + * @gpa: Absolute guest address of the location to be changed.
> > + * @len: Operand length of the cmpxchg, required: 1 <= len <= 16. Providing a
> > + *       non power of two will result in failure.
> > + * @old_addr: Pointer to old value. If the location at @gpa contains this value, the
> > + *         exchange will succeed. After calling cmpxchg_guest_abs_with_key() *@old
> > + *         contains the value at @gpa before the attempt to exchange the value.
> > + * @new: The value to place at @gpa.
> > + * @access_key: The access key to use for the guest access.
> > + *
> > + * Atomically exchange the value at @gpa by @new, if it contains *@old.
> > + * Honors storage keys.
> > + *
> > + * Return: * 0: successful exchange
> > + *         * 1: exchange unsuccessful
> > + *         * a program interruption code indicating the reason cmpxchg could
> > + *           not be attempted
> 
> PGM_OPERATION has also the value 1 ... can we be sure that it never happens 
> here?

Currently yes, only program errors are those explicit in the code,
PGM_ADDRESSING and PGM_PROTECTION.

> ... maybe it would make sense to use KVM_S390_MEMOP_R_NO_XCHG for 
> return value here instead of 1, too, just to be on the safe side?

I didn't like that idea because I consider KVM_S390_MEMOP_R_NO_XCHG to be
part of the KVM's api surface and cmpxchg_guest_abs_with_key is an internal
function that shouldn't concern itself with that.

But being unclear on PGM_OPERATION is indeed ugly.
Maybe I should just replace "a program interruption code ..." with the specific ones?
> 
> Apart from that, patch looks fine to me.
> 
>   Thomas
> 
> 
> > + *         * -EINVAL: address misaligned or len not power of two
> > + *         * -EAGAIN: transient failure (len 1 or 2)
> > + *         * -EOPNOTSUPP: read-only memslot (should never occur)
> > + */
> > +int cmpxchg_guest_abs_with_key(struct kvm *kvm, gpa_t gpa, int len,
> > +			       __uint128_t *old_addr, __uint128_t new,
> > +			       u8 access_key)
> > +{
> > +	gfn_t gfn = gpa >> PAGE_SHIFT;
> > +	struct kvm_memory_slot *slot = gfn_to_memslot(kvm, gfn);
> > +	bool writable;
> > +	hva_t hva;
> > +	int ret;
> > +
> > +	if (!IS_ALIGNED(gpa, len))
> > +		return -EINVAL;
> > +
> > +	hva = gfn_to_hva_memslot_prot(slot, gfn, &writable);
> > +	if (kvm_is_error_hva(hva))
> > +		return PGM_ADDRESSING;
> > +	/*
> > +	 * Check if it's a read-only memslot, even though that cannot occur
> > +	 * since those are unsupported.
> > +	 * Don't try to actually handle that case.
> > +	 */
> > +	if (!writable)
> > +		return -EOPNOTSUPP;
> > +
> > +	hva += offset_in_page(gpa);
> > +	switch (len) {
> > +	case 1: {
> > +		u8 old;
> > +
> > +		ret = cmpxchg_user_key((u8 *)hva, &old, *old_addr, new, access_key);
> > +		ret = ret < 0 ? ret : old != *old_addr;
> > +		*old_addr = old;
> > +		break;
> > +	}
> > +	case 2: {
> > +		u16 old;
> > +
> > +		ret = cmpxchg_user_key((u16 *)hva, &old, *old_addr, new, access_key);
> > +		ret = ret < 0 ? ret : old != *old_addr;
> > +		*old_addr = old;
> > +		break;
> > +	}
> > +	case 4: {
> > +		u32 old;
> > +
> > +		ret = cmpxchg_user_key((u32 *)hva, &old, *old_addr, new, access_key);
> > +		ret = ret < 0 ? ret : old != *old_addr;
> > +		*old_addr = old;
> > +		break;
> > +	}
> > +	case 8: {
> > +		u64 old;
> > +
> > +		ret = cmpxchg_user_key((u64 *)hva, &old, *old_addr, new, access_key);
> > +		ret = ret < 0 ? ret : old != *old_addr;
> > +		*old_addr = old;
> > +		break;
> > +	}
> > +	case 16: {
> > +		__uint128_t old;
> > +
> > +		ret = cmpxchg_user_key((__uint128_t *)hva, &old, *old_addr, new, access_key);
> > +		ret = ret < 0 ? ret : old != *old_addr;
> > +		*old_addr = old;
> > +		break;
> > +	}
> > +	default:
> > +		return -EINVAL;
> > +	}
> > +	mark_page_dirty_in_slot(kvm, slot, gfn);
> > +	/*
> > +	 * Assume that the fault is caused by protection, either key protection
> > +	 * or user page write protection.
> > +	 */
> > +	if (ret == -EFAULT)
> > +		ret = PGM_PROTECTION;
> > +	return ret;
> > +}
[...]




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux