Re: [PATCH 03/27] drm/i915/gvt: Incorporate KVM memslot info into check for 2MiB GTT entry

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 05, 2023 at 05:40:32PM +0000, Sean Christopherson wrote:
> On Thu, Jan 05, 2023, Yan Zhao wrote:
> > On Tue, Jan 03, 2023 at 09:13:54PM +0000, Sean Christopherson wrote:
> > > On Wed, Dec 28, 2022, Yan Zhao wrote:
> > > > On Fri, Dec 23, 2022 at 12:57:15AM +0000, Sean Christopherson wrote:
> > > > > Honor KVM's max allowed page size when determining whether or not a 2MiB
> > > > > GTT shadow page can be created for the guest.  Querying KVM's max allowed
> > > > > size is somewhat odd as there's no strict requirement that KVM's memslots
> > > > > and VFIO's mappings are configured with the same gfn=>hva mapping, but
> > > > Without vIOMMU, VFIO's mapping is configured with the same as KVM's
> > > > memslots, i.e. with the same gfn==>HVA mapping
> > > 
> > > But that's controlled by userspace, correct?
> > 
> > Yes, controlled by QEMU.
> 
> ...
> 
> > > Strictly speaking, no.  E.g. if a 2MiB region is covered with multiple memslots
> > > and the memslots have different properties.
> > > 
> > > > If for some reason, KVM maps a 2MiB range in 4K sizes, KVMGT can still map
> > > > it in IOMMU size in 2MiB size as long as the PFNs are continous and the
> > > > whole range is all exposed to guest.
> > > 
> > > I agree that practically speaking this will hold true, but if KVMGT wants to honor
> > > KVM's memslots then checking that KVM allows a hugepage is correct.  Hrm, but on
> > > the flip side, KVMGT ignores read-only memslot flags, so KVMGT is already ignoring
> > > pieces of KVM's memslots.
> > KVMGT calls dma_map_page() with DMA_BIDIRECTIONAL after checking gvt_pin_guest_page().
> > Though for a read-only memslot, DMA_TO_DEVICE should be used instead
> > (see dma_info_to_prot()),
> > as gvt_pin_guest_page() checks (IOMMU_READ | IOMMU_WRITE) permission for each page,
> > it actually ensures that the pinned GFN is not in a read-only memslot.
> > So, it should be fine.
> > 
> > > 
> > > I have no objection to KVMGT defining its ABI such that KVMGT is allowed to create
> > > 2MiB so long as (a) the GFN is contiguous according to VFIO, and (b) that the entire
> > > 2MiB range is exposed to the guest.
> > > 
> > sorry. I may not put it clearly enough.
> > for a normal device pass-through via VFIO-PCI, VFIO maps IOMMU mappings in this way:
> > 
> > (a) fault in PFNs in a GFN range within the same memslot (VFIO saves dma_list, which is
> > the same as memslot list when vIOMMU is not on or not in shadow mode).
> > (b) map continuous PFNs into iommu driver (honour ro attribute and can > 2MiB as long as
> > PFNs are continuous).
> > (c) IOMMU driver decides to map in 2MiB or in 4KiB according to its setting.
> > 
> > For KVMGT, gvt_dma_map_page() first calls gvt_pin_guest_page() which
> > (a) calls vfio_pin_pages() to check each GFN is within allowed dma_list with
> > (IOMMU_READ | IOMMU_WRITE) permission and fault-in page. 
> > (b) checks PFNs are continuous in 2MiB,
> > 
> > Though checking kvm_page_track_max_mapping_level() is also fine, it makes DMA
> > mapping size unnecessarily smaller.
> 
> Yeah, I got all that.  What I'm trying to say, and why I asked about whether or
> not userspace controls the mappings, is that AFAIK there is nothing in the kernel
> that coordinates mappings between VFIO and KVM.  So, very technically, userspace
> could map a 2MiB range contiguous in VFIO but not in KVM, or RW in VFIO but RO in KVM.
> 
> I can't imagine there's a real use case for doing so, and arguably there's no
> requirement that KVMGT honor KVM's memslot.  But because KVMGT taps into KVM's
> page-tracking, KVMGT _does_ honor KVM's memslots to some extent because KVMGT
> needs to know whether or not a given GFN can be write-protected.
> 
> I'm totally fine if KVMGT's ABI is that VFIO is the source of truth for mappings
> and permissions, and that the only requirement for KVM memslots is that GTT page
> tables need to be visible in KVM's memslots.  But if that's the ABI, then
> intel_gvt_is_valid_gfn() should be probing VFIO, not KVM (commit cc753fbe1ac4
> ("drm/i915/gvt: validate gfn before set shadow page entry").
> 
> In other words, pick either VFIO or KVM.  Checking that X is valid according to
> KVM and then mapping X through VFIO is confusing and makes assumptions about how
> userspace configures KVM and VFIO.  It works because QEMU always configures KVM
> and VFIO as expected, but IMO it's unnecessarily fragile and again confusing for
> unaware readers because the code is technically flawed.
>
Agreed. 
Then after some further thought, I think maybe we can just remove
intel_gvt_is_valid_gfn() in KVMGT, because

(1) both intel_gvt_is_valid_gfn() in emulate_ggtt_mmio_write() and
ppgtt_populate_spt() are not for page track purpose, but to validate bogus
GFN.
(2) gvt_pin_guest_page() with gfn and size can do the validity checking,
which is called in intel_gvt_dma_map_guest_page(). So, we can move the
mapping of scratch page to the error path after intel_gvt_dma_map_guest_page().


As below,

diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c
index 54b32ab843eb..5a85936df6d4 100644
--- a/drivers/gpu/drm/i915/gvt/gtt.c
+++ b/drivers/gpu/drm/i915/gvt/gtt.c
@@ -49,15 +49,6 @@
 static bool enable_out_of_sync = false;
 static int preallocated_oos_pages = 8192;

-static bool intel_gvt_is_valid_gfn(struct intel_vgpu *vgpu, unsigned long gfn)
-{
-       if (!vgpu->attached)
-               return false;
-
-       /* FIXME: This doesn't properly handle guest entries larger than 4K. */
-       return kvm_page_track_is_valid_gfn(vgpu->vfio_device.kvm, gfn);
-}
-
 /*
  * validate a gm address and related range size,
  * translate it to host gm address
@@ -1340,16 +1331,12 @@ static int ppgtt_populate_spt(struct intel_vgpu_ppgtt_spt *spt)
                        ppgtt_generate_shadow_entry(&se, s, &ge);
                        ppgtt_set_shadow_entry(spt, &se, i);
                } else {
-                       gfn = ops->get_pfn(&ge);
-                       if (!intel_gvt_is_valid_gfn(vgpu, gfn)) {
+                       ret = ppgtt_populate_shadow_entry(vgpu, spt, i, &ge);
+                       if (ret) {
                                ops->set_pfn(&se, gvt->gtt.scratch_mfn);
                                ppgtt_set_shadow_entry(spt, &se, i);
-                               continue;
-                       }
-
-                       ret = ppgtt_populate_shadow_entry(vgpu, spt, i, &ge);
-                       if (ret)
                                goto fail;
+                       }
                }
        }
        return 0;
@@ -2336,14 +2325,6 @@ static int emulate_ggtt_mmio_write(struct intel_vgpu *vgpu, unsigned int off,
                m.val64 = e.val64;
                m.type = e.type;

-               /* one PTE update may be issued in multiple writes and the
-                * first write may not construct a valid gfn
-                */
-               if (!intel_gvt_is_valid_gfn(vgpu, gfn)) {
-                       ops->set_pfn(&m, gvt->gtt.scratch_mfn);
-                       goto out;
-               }
-
                ret = intel_gvt_dma_map_guest_page(vgpu, gfn, PAGE_SIZE,
                                                   &dma_addr);
                if (ret) {


> On a related topic, ppgtt_populate_shadow_entry() should check the validity of the
> gfn.  If I'm reading the code correctly, checking only in ppgtt_populate_spt() fails
> to handle the case where the guest creates a bogus mapping when writing an existing
> GTT PT.
Don't get it here. Could you elaborate more?

> 
> Combing all my trains of thought, what about this as an end state for this series?
> (completely untested at this point).  Get rid of the KVM mapping size checks,
> verify the validity of the entire range being mapped, and add a FIXME to complain
> about using KVM instead of VFIO to determine the validity of ranges.
> 
> static bool intel_gvt_is_valid_gfn(struct intel_vgpu *vgpu, unsigned long gfn,
> 				   enum intel_gvt_gtt_type type)
> {
> 	unsigned long nr_pages;
> 
> 	if (!vgpu->attached)
> 		return false;
> 
> 	if (type == GTT_TYPE_PPGTT_PTE_64K_ENTRY)
> 		nr_pages = I915_GTT_PAGE_SIZE_64K >> PAGE_SHIFT;
> 	else if (type == GTT_TYPE_PPGTT_PTE_2M_ENTRY)
> 		nr_pages = I915_GTT_PAGE_SIZE_2M >> PAGE_SHIFT;
> 	else
> 		nr_pages = 1;
> 
> 	/*
> 	 * FIXME: Probe VFIO, not KVM.  VFIO is the source of truth for KVMGT
> 	 * mappings and permissions, KVM's involvement is purely to handle
> 	 * write-tracking of GTT page tables.
> 	 */
> 	return kvm_page_track_is_contiguous_gfn_range(vgpu->vfio_device.kvm,
> 						      gfn, nr_pages);
> }
> 
> static int try_map_2MB_gtt_entry(struct intel_vgpu *vgpu, unsigned long gfn,
> 				 dma_addr_t *dma_addr)
> {
> 	if (!HAS_PAGE_SIZES(vgpu->gvt->gt->i915, I915_GTT_PAGE_SIZE_2M))
> 		return 0;
> 
> 	return intel_gvt_dma_map_guest_page(vgpu, gfn,
> 					    I915_GTT_PAGE_SIZE_2M, dma_addr);
> }
> 
> static int ppgtt_populate_shadow_entry(struct intel_vgpu *vgpu,
> 	struct intel_vgpu_ppgtt_spt *spt, unsigned long index,
> 	struct intel_gvt_gtt_entry *ge)
> {
> 	const struct intel_gvt_gtt_pte_ops *pte_ops = vgpu->gvt->gtt.pte_ops;
> 	dma_addr_t dma_addr = vgpu->gvt->gtt.scratch_mfn << PAGE_SHIFT;
> 	struct intel_gvt_gtt_entry se = *ge;
> 	unsigned long gfn;
> 	int ret;
> 
> 	if (!pte_ops->test_present(ge))
> 		goto set_shadow_entry;
> 
> 	gfn = pte_ops->get_pfn(ge);
> 	if (!intel_gvt_is_valid_gfn(vgpu, gfn, ge->type))
> 		goto set_shadow_entry;
As KVMGT only tracks PPGTT page table pages, this check here is not for page
track purpose, but to check bogus GFN.
So, Just leave the bogus GFN check to intel_gvt_dma_map_guest_page() through
VFIO is all right.

On the other hand, for the GFN validity for page track purpose, we can
leave it to kvm_write_track_add_gfn().

Do you think it's ok?


> 	...
> 
> 
> set_shadow_entry:
> 	pte_ops->set_pfn(&se, dma_addr >> PAGE_SHIFT);
> 	ppgtt_set_shadow_entry(spt, &se, index);
> 	return 0;
> }



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux